74 research outputs found

    Ultrafast insulator-metal transition in VO2 nanostructures assisted by picosecond strain pulses

    Get PDF
    Strain engineering is a powerful technology that exploits the stationary external or internal stress of specific spatial distribution for controlling the fundamental properties of condensed materials and nanostructures. This advanced technique modulates in space the carrier density and mobility, the optical absorption, and in strongly correlated systems, the phase, e.g., insulator-metal or ferromagnetic-paramagnetic. However, while successfully accessing nanometer-length scales, strain engineering is yet to be brought down to ultrafast time scales allowing strain-assisted control of the state of matter at THz frequencies. We demonstrate control of an optically-driven insulator-to-metal phase transition by a picosecond strain pulse, which paves the way to ultrafast strain engineering in nanostructures with phase transitions. This is realized by simultaneous excitation of VO2 nanohillocks by a 170-fs laser and picosecond strain pulses finely timed with each other. By monitoring the transient optical reflectivity of the VO2, we show that strain pulses, depending on the sign of the strain at the moment of optical excitation, increase or decrease the fraction of VO2 that undergoes an ultrafast phase transition. A transient strain of moderate amplitude of approximately 0.1% applied during ultrafast photo-induced nonthermal transition changes the fraction of VO2 in the laser-induced phase by approximately 1%. In contrast, if applied after the photoexcitation when the phase transformations of the material are governed by thermal processes, a transient strain of the same amplitude produces no measurable effect on the phase state

    Factors underlying the perturbation resistance of the trunk in the first part of a lifting movement

    Get PDF
    In the first part of lifting movements, the trunk movement is surprisingly resistant to perturbations. This study examined which factors contribute to this perturbation resistance of the trunk during lifting. Three possible mechanisms were studied: force-length-velocity characteristics of muscles, the momentum of the trunk as well as the effect of passive extending of the elbows. A forward dynamics modelling and simulation approach was adopted with two different input signals: (1) stimulation of Hill-type muscles versus (2) net joint moments. Experimental data collected during an unperturbed lifting movement were used as a reference, which a simulated lifting movement had to resemble. Subsequently, the simulated lifting movement was perturbed by applying 10 kg extra mass at the wrist (both before and after lift-off and with/without a fixed elbow), without modifying the input signals. The momentum of the trunk appeared to be insufficient to explain the perturbation resistance of trunk movements as found experimentally. In addition to the momentum of the trunk, the force-length-velocity characteristics of the muscles are necessary to account for the observed perturbation resistance. Initial extension of the elbow due to the mass perturbation delayed the propagation of the load to the shoulder. However, this delay is reduced due to the impedance at the elbow provided by the characteristics of muscles spanning the elbow. So, the force-length-velocity characteristics of the muscles spanning the elbow joint increase the perturbation at the trunk. © Springer-Verlag 2005

    Study of W boson production in PbPb and pp collisions at sqrt(s[NN]) = 2.76 TeV

    Get PDF
    A measurement is presented of W-boson production in PbPb collisions carried out at a nucleon-nucleon (NN) centre-of-mass energy sqrt(s[NN]) of 2.76 TeV at the LHC using the CMS detector. In data corresponding to an integrated luminosity of 7.3 inverse microbarns, the number of W to mu mu-neutrino decays is extracted in the region of muon pseudorapidity abs(eta[mu])<2.1 and transverse momentum pt[mu]>25 GeV. Yields of muons found per unit of pseudorapidity correspond to (159 +/- 10 (stat.) +/- 12 (syst.)) 10E-8 W(plus) and (154 +/- 10 (stat.) +/- 12 (syst.)) 10E-8 W(minus) bosons per minimum-bias PbPb collision. The dependence of W production on the centrality of PbPb collisions is consistent with a scaling of the yield by the number of incoherent NN collisions. The yield of W bosons is also studied in a sample of pp interactions at sqrt(s)= 2.76 TeV corresponding to an integrated luminosity of 231 inverse nanobarns. The individual W(plus) and W(minus) yields in PbPb and pp collisions are found to agree, once the neutron and proton content in Pb nuclei is taken into account. Likewise, the difference observed in the dependence of the positive and negative muon production on pseudorapidity is consistent with next-to-leading order perturbative QCD calculations.Comment: Submitted to Physics Letters

    Study of the lineshape of the chi(c1) (3872) state

    Get PDF
    A study of the lineshape of the chi(c1) (3872) state is made using a data sample corresponding to an integrated luminosity of 3 fb(-1) collected in pp collisions at center-of-mass energies of 7 and 8 TeV with the LHCb detector. Candidate chi(c1)(3872) and psi(2S) mesons from b-hadron decays are selected in the J/psi pi(+)pi(-) decay mode. Describing the lineshape with a Breit-Wigner function, the mass splitting between the chi(c1 )(3872) and psi(2S) states, Delta m, and the width of the chi(c1 )(3872) state, Gamma(Bw), are determined to be (Delta m=185.598 +/- 0.067 +/- 0.068 Mev,)(Gamma BW=1.39 +/- 0.24 +/- 0.10 Mev,) where the first uncertainty is statistical and the second systematic. Using a Flatte-inspired model, the mode and full width at half maximum of the lineshape are determined to be (mode=3871.69+0.00+0.05 MeV.)(FWHM=0.22-0.04+0.13+0.07+0.11-0.06-0.13 MeV, ) An investigation of the analytic structure of the Flatte amplitude reveals a pole structure, which is compatible with a quasibound D-0(D) over bar*(0) state but a quasivirtual state is still allowed at the level of 2 standard deviations

    Measurement of the CKM angle γγ in B±→DK±B^\pm\to D K^\pm and B±→Dπ±B^\pm \to D π^\pm decays with D→KS0h+h−D \to K_\mathrm S^0 h^+ h^-

    Get PDF
    A measurement of CPCP-violating observables is performed using the decays B±→DK±B^\pm\to D K^\pm and B±→Dπ±B^\pm\to D \pi^\pm, where the DD meson is reconstructed in one of the self-conjugate three-body final states KSπ+π−K_{\mathrm S}\pi^+\pi^- and KSK+K−K_{\mathrm S}K^+K^- (commonly denoted KSh+h−K_{\mathrm S} h^+h^-). The decays are analysed in bins of the DD-decay phase space, leading to a measurement that is independent of the modelling of the DD-decay amplitude. The observables are interpreted in terms of the CKM angle Îł\gamma. Using a data sample corresponding to an integrated luminosity of 9 fb−19\,\text{fb}^{-1} collected in proton-proton collisions at centre-of-mass energies of 77, 88, and 13 TeV13\,\text{TeV} with the LHCb experiment, Îł\gamma is measured to be (68.7−5.1+5.2)∘\left(68.7^{+5.2}_{-5.1}\right)^\circ. The hadronic parameters rBDKr_B^{DK}, rBDπr_B^{D\pi}, ÎŽBDK\delta_B^{DK}, and ÎŽBDπ\delta_B^{D\pi}, which are the ratios and strong-phase differences of the suppressed and favoured B±B^\pm decays, are also reported

    Measurement of forward charged hadron flow harmonics in peripheral PbPb collisions at √sNN = 5.02 TeV with the LHCb detector

    Get PDF
    Flow harmonic coefficients, v n , which are the key to studying the hydrodynamics of the quark-gluon plasma (QGP) created in heavy-ion collisions, have been measured in various collision systems and kinematic regions and using various particle species. The study of flow harmonics in a wide pseudorapidity range is particularly valuable to understand the temperature dependence of the shear viscosity to entropy density ratio of the QGP. This paper presents the first LHCb results of the second- and the third-order flow harmonic coefficients of charged hadrons as a function of transverse momentum in the forward region, corresponding to pseudorapidities between 2.0 and 4.9, using the data collected from PbPb collisions in 2018 at a center-of-mass energy of 5.02 TeV . The coefficients measured using the two-particle angular correlation analysis method are smaller than the central-pseudorapidity measurements at ALICE and ATLAS from the same collision system but share similar features

    Helium identification with LHCb

    Get PDF
    The identification of helium nuclei at LHCb is achieved using a method based on measurements of ionisation losses in the silicon sensors and timing measurements in the Outer Tracker drift tubes. The background from photon conversions is reduced using the RICH detectors and an isolation requirement. The method is developed using pp collision data at √(s) = 13 TeV recorded by the LHCb experiment in the years 2016 to 2018, corresponding to an integrated luminosity of 5.5 fb-1. A total of around 105 helium and antihelium candidates are identified with negligible background contamination. The helium identification efficiency is estimated to be approximately 50% with a corresponding background rejection rate of up to O(10^12). These results demonstrate the feasibility of a rich programme of measurements of QCD and astrophysics interest involving light nuclei

    Curvature-bias corrections using a pseudomass method

    Get PDF
    Momentum measurements for very high momentum charged particles, such as muons from electroweak vector boson decays, are particularly susceptible to charge-dependent curvature biases that arise from misalignments of tracking detectors. Low momentum charged particles used in alignment procedures have limited sensitivity to coherent displacements of such detectors, and therefore are unable to fully constrain these misalignments to the precision necessary for studies of electroweak physics. Additional approaches are therefore required to understand and correct for these effects. In this paper the curvature biases present at the LHCb detector are studied using the pseudomass method in proton-proton collision data recorded at centre of mass energy √(s)=13 TeV during 2016, 2017 and 2018. The biases are determined using Z→Ό + ÎŒ - decays in intervals defined by the data-taking period, magnet polarity and muon direction. Correcting for these biases, which are typically at the 10-4 GeV-1 level, improves the Z→Ό + ÎŒ - mass resolution by roughly 18% and eliminates several pathological trends in the kinematic-dependence of the mean dimuon invariant mass
    • 

    corecore