Practical, Microfabrication-Free Device for Single-Cell Isolation

Microfabricated devices have great potential in cell-level studies, but are not easily accessible for the broad biology community. This paper introduces the Microscale Oil-Covered Cell Array (MOCCA) as a low-cost device for high throughput single-cell analysis that can be easily produced by researchers without microengineering knowledge. Instead of using microfabricated structures to capture cells, MOCCA isolates cells in discrete aqueous droplets that are separated by oil on patterned hydrophilic areas across a relatively more hydrophobic substrate. The number of randomly seeded Escherichia coli bacteria in each discrete droplet approaches single-cell levels. The cell distribution on MOCCA is well-fit with Poisson distribution. In this pioneer study, we created an array of 900-picoliter droplets. The total time needed to seed cells in ∼3000 droplets was less than 10 minutes. Compared to traditional microfabrication techniques, MOCCA dramatically lowers the cost of microscale cell arrays, yet enhances the fabrication and operational efficiency for single-cell analysis

Development of a questionnaire to assess sedentary time in older persons -- a comparative study using accelerometry

Background: There is currently no validated questionnaire available to assess total sedentary time in older adults. Most studies only used TV viewing time as an indicator of sedentary time. The first aim of our study was to investigate the self-reported time spent by older persons on a set of sedentary activities, and to compare this with objective sedentary time measured by accelerometry. The second aim was to determine what set of self-reported sedentary activities should be used to validly rank people's total sedentary time. Finally we tested the reliability of our newly developed questionnaire using the best performing set of sedentary activities. Methods. The study sample included 83 men and women aged 65-92 y, a random sample of Longitudinal Aging Study Amsterdam participants, who completed a questionnaire including ten sedentary activities and wore an Actigraph GT3X accelerometer for 8 days. Spearman correlation coefficients were calculated to examine the association between self-reported time and objective sedentary time. The test-retest reliability was calculated using the intraclass correlation coefficient (ICC). Results: Mean total self-reported sedentary time was 10.4 (SD 3.5) h/d and was not significantly different from mean total objective sedentary time (10.2 (1.2) h/d, p = 0.63). Total self-reported sedentary time on an average day (sum of ten activities) correlated moderately (Spearman's r = 0.35, p < 0.01) with total objective sedentary time. The correlation improved when using the sum of six activities (r = 0.46, p < 0.01), and was much higher than when using TV watching only (r = 0.22, p = 0.05). The test-retest reliability of the sum of six sedentary activities was 0.71 (95% CI 0.57-0.81). Conclusions: A questionnaire including six sedentary activities was moderately associated with accelerometry-derived sedentary time and can be used to reliably rank sedentary time in older persons. © 2013 Visser and Koster; licensee BioMed Central Ltd

MRI follow-up of conservatively treated meniscal knee lesions in general practice

Objective: To evaluate meniscal status change on follow-up MRI after 1 year, prognostic factors and association with clinical outcome in patients with conservatively treated knee injury. Methods: We analysed 403 meniscal horns in 101 conservatively treated patients (59 male; mean age 40 years) in general practice who underwent initial knee MRI within 5 weeks of trauma. We performed ordinal logistic regression analysis to analyse prognostic factors for meniscal change on follow-up MRI after 1 year, and we assessed the association with clinical outcome. Results: On follow-up MRI 49 meniscal horns had deteriorated and 18 had improved. Age (odds ratio [OR] 1.3/decade), body weight (OR 1.2/10 kg), total anterior cruciate ligament (ACL) rupture on initial MRI (OR 2.4), location in the posterior horn of the medial meniscus (OR 3.0) and an initial meniscal lesion (OR 0.3) were statistically significant predictors of meniscal MRI appearance change after 1 year, which was not associated with clinical outcome. Conclusion: In conservatively treated patients, meniscal deterioration on follow-up MRI 1 year after trauma is predicted by higher age and body weight, initial total ACL rupture, and location in the medial posterior horn. Change in MRI appearance is not associated with clinical outcome

Association of objective sedentary behaviour and self-rated health in English older adults

Abstract Objective Reducing sedentary behaviour (SB) might improve the health of older adults. However, we know little about how objectively measured SB impacts on self-rated health in older adults. We aimed to explore the associations between objectively measured SB and self-rated health in English older adults. Results A random sub-sample of older adults (≥ 65 years old) from the 2008 Health Survey for England wore an ActiGraph GT1M accelerometer for 7 days. Self-rated health was measured using an item from the General Health Questionnaire. Linear regression and analysis of covariance were used to test the associations between percentage time spent in SB and mean daily minutes in SB and self-rated health (very good/good; fair; bad/very bad), adjusting for covariates. Valid accelerometry datasets were returned by 578 individuals. Significant negative associations between percentage time and mean daily minutes in SB and self-rated health were found. In particular, individuals spending reduced percentages of time being sedentary had higher self-rated health. In conclusion, SB appears to be associated with self-rated health in older people independently from MVPA. If longitudinal research could determine how changes in SB influence self-rated health as individuals’ age, this might be an important lifestyle variable to target for health improvement

A Novel Extracytoplasmic Function (ECF) Sigma Factor Regulates Virulence in Pseudomonas aeruginosa

Next to the two-component and quorum sensing systems, cell-surface signaling (CSS) has been recently identified as an important regulatory system in Pseudomonas aeruginosa. CSS systems sense signals from outside the cell and transmit them into the cytoplasm. They generally consist of a TonB-dependent outer membrane receptor, a sigma factor regulator (or anti-sigma factor) in the cytoplasmic membrane, and an extracytoplasmic function (ECF) sigma factor. Upon perception of the extracellular signal by the receptor the ECF sigma factor is activated and promotes the transcription of a specific set of gene(s). Although most P. aeruginosa CSS systems are involved in the regulation of iron uptake, we have identified a novel system involved in the regulation of virulence. This CSS system, which has been designated PUMA3, has a number of unusual characteristics. The most obvious difference is the receptor component which is considerably smaller than that of other CSS outer membrane receptors and lacks a β-barrel domain. Homology modeling of PA0674 shows that this receptor is predicted to be a bilobal protein, with an N-terminal domain that resembles the N-terminal periplasmic signaling domain of CSS receptors, and a C-terminal domain that resembles the periplasmic C-terminal domains of the TolA/TonB proteins. Furthermore, the sigma factor regulator both inhibits the function of the ECF sigma factor and is required for its activity. By microarray analysis we show that PUMA3 regulates the expression of a number of genes encoding potential virulence factors, including a two-partner secretion (TPS) system. Using zebrafish (Danio rerio) embryos as a host we have demonstrated that the P. aeruginosa PUMA3-induced strain is more virulent than the wild-type. PUMA3 represents the first CSS system dedicated to the transcriptional activation of virulence functions in a human pathogen

The SITLESS project: Exercise referral schemes enhanced by self-management strategies to battle sedentary behaviour in older adults: Study protocol for a randomised controlled trial

Abstract Background Older adults are the fastest growing segment of the world‘s population. Recent evidence indicates that excessive sitting time is harmful to health, independent of meeting the recommended moderate to vigorous physical activity (PA) guidelines. The SITLESS project aims to determine whether exercise referral schemes (ERS) can be enhanced by self-management strategies (SMSs) to reduce sedentary behaviour (SB), increase PA and improve health, quality of life and function in the long term, as well as psychosocial outcomes in community-dwelling older European citizens from four countries, within a three-armed pragmatic randomised controlled trial, compared with ERS alone and also with general recommendations about PA. Methods A total of 1338 older adults will be included in this study, recruited from four European countries through different existing primary prevention pathways. Participants will be randomly allocated into an ERS of 16 weeks (32 sessions, 45–60 min per session), ERS enhanced by seven sessions of SMSs and four telephone prompts, or a control group. Outcomes will be assessed at baseline, month 4 (end of ERS intervention), month 16 (12 months post intervention) and month 22 (18 months post intervention). Primary outcomes will include measures of SB (time spent sedentary) and PA (counts per minute). Secondary outcomes will include muscle and physical function, health economics’ related outcomes, anthropometry, quality of life, social networks, anxiety and depressive symptoms, disability, fear of falling, executive function and fatigue. A process evaluation will be conducted throughout the trial. The full analysis set will follow an intention-to-treat principle and will include all randomised participants for whom a baseline assessment is conducted. The study hypothesis will be tested with mixed linear models with repeated measures, to assess changes in the main outcomes (SB and PA) over time (baseline to month 22) and between study arms. Discussion The findings of this study may help inform the design and implementation of more effective interventions to reduce SB and increase PA levels, and hence improve long-term health outcomes in the older adult population. SITLESS aims to support policy-makers in deciding how or whether ERS should be further implemented or restructured in order to increase its adherence, impact and cost-effectiveness. Trial registration ClinicalTrials.gov, NCT02629666 . Registered 19 November 2015

Methanogens, sulphate and heavy metals: a complex system

Anaerobic digestion (AD) is a well-established technology used for the treatment of wastes and wastewaters with high organic content. During AD organic matter is converted stepwise to methane-containing biogasa renewable energy carrier. Methane production occurs in the last AD step and relies on methanogens, which are rather sensitive to some contaminants commonly found in wastewaters (e.g. heavy metals), or easily outcompeted by other groups of microorganisms (e.g. sulphate reducing bacteria, SRB). This review gives an overview of previous research and pilot-scale studies that shed some light on the effects of sulphate and heavy metals on methanogenesis. Despite the numerous studies on this subject, comparison is not always possible due to differences in the experimental conditions used and parameters explained. An overview of the possible benefits of methanogens and SRB co-habitation is also covered. Small amounts of sulphide produced by SRB can precipitate with metals, neutralising the negative effects of sulphide accumulation and free heavy metals on methanogenesis. Knowledge on how to untangle and balance sulphate reduction and methanogenesis is crucial to take advantage of the potential for the utilisation of biogenic sulphide as a metal detoxification agent with minimal loss in methane production in anaerobic digesters.The research was financially supported by the People Program (Marie Curie Actions) of the European Union's Seventh Framework Programme FP7/2007-2013 under REA agreement 289193

Pan-cancer analysis of whole genomes

Cancer is driven by genetic change, and the advent of massively parallel sequencing has enabled systematic documentation of this variation at the whole-genome scale(1-3). Here we report the integrative analysis of 2,658 whole-cancer genomes and their matching normal tissues across 38 tumour types from the Pan-Cancer Analysis of Whole Genomes (PCAWG) Consortium of the International Cancer Genome Consortium (ICGC) and The Cancer Genome Atlas (TCGA). We describe the generation of the PCAWG resource, facilitated by international data sharing using compute clouds. On average, cancer genomes contained 4-5 driver mutations when combining coding and non-coding genomic elements; however, in around 5% of cases no drivers were identified, suggesting that cancer driver discovery is not yet complete. Chromothripsis, in which many clustered structural variants arise in a single catastrophic event, is frequently an early event in tumour evolution; in acral melanoma, for example, these events precede most somatic point mutations and affect several cancer-associated genes simultaneously. Cancers with abnormal telomere maintenance often originate from tissues with low replicative activity and show several mechanisms of preventing telomere attrition to critical levels. Common and rare germline variants affect patterns of somatic mutation, including point mutations, structural variants and somatic retrotransposition. A collection of papers from the PCAWG Consortium describes non-coding mutations that drive cancer beyond those in the TERT promoter(4); identifies new signatures of mutational processes that cause base substitutions, small insertions and deletions and structural variation(5,6); analyses timings and patterns of tumour evolution(7); describes the diverse transcriptional consequences of somatic mutation on splicing, expression levels, fusion genes and promoter activity(8,9); and evaluates a range of more-specialized features of cancer genomes(8,10-18).Peer reviewe

P3HT-Based Solar Cells: Structural Properties and Photovoltaic Performance

Each year we are bombarded with B.Sc. and Ph.D. applications from students that want to improve the world. They have learned that their future depends on changing the type of fuel we use and that solar energy is our future. The hope and energy of these young people will transform future energy technologies, but it will not happen quickly. Organic photovoltaic devices are easy to sketch, but the materials, processing steps, and ways of measuring the properties of the materials are very complicated. It is not trivial to make a systematic measurement that will change the way other research groups think or practice. In approaching this chapter, we thought about what a new researcher would need to know about organic photovoltaic devices and materials in order to have a good start in the subject. Then, we simplified that to focus on what a new researcher would need to know about poly-3-hexylthiophene:phenyl-C61-butyric acid methyl ester blends (P3HT: PCBM) to make research progress with these materials. This chapter is by no means authoritative or a compendium of all things on P3HT:PCBM. We have selected to explain how the sample fabrication techniques lead to control of morphology and structural features and how these morphological features have specific optical and electronic consequences for organic photovoltaic device applications