Multiple Genome Wide Association Mapping Models Identify Quantitative Trait Nucleotides for Brown Planthopper (Nilaparvata lugens) Resistance in MAGIC Indica Population of Rice

Brown planthopper (BPH), one of the most important pests of the rice (Oryza sativa) crop, becomes catastrophic under severe infestations and causes up to 60% yield loss. The highly disastrous BPH biotype in the Indian sub-continent is Biotype 4, which also known as the South Asian Biotype. Though many resistance genes were mapped until now, the utility of the resistance genes in the breeding programs is limited due to the breakdown of resistance and emergence of new biotypes. Hence, to identify the resistance genes for this economically important pest, we have used a multi-parent advanced generation intercross (MAGIC) panel consisting of 391 lines developed from eight indica founder parents. The panel was phenotyped at the controlled conditions for two consecutive years. A set of 27,041 cured polymorphic single nucleotide polymorphism (SNPs) and across-year phenotypic data were used for the identification of marker–trait associations. Genome-wide association analysis was performed to find out consistent associations by employing four single and two multi-locus models. Sixty-one SNPs were consistently detected by all six models. A set of 190 significant marker-associations identified by fixed and random model circulating probability unification (FarmCPU) were considered for searching resistance candidate genes. The highest number of annotated genes were found in chromosome 6 followed by 5 and 1. Ninety-two annotated genes identified across chromosomes of which 13 genes are associated BPH resistance including NB-ARC (nucleotide binding in APAF-1, R gene products, and CED-4) domain-containing protein, NHL repeat-containing protein, LRR containing protein, and WRKY70. The significant SNPs and resistant lines identified from our study could be used for an accelerated breeding program to develop new BPH resistant cultivars

Multi-messenger observations of a binary neutron star merger

On 2017 August 17 a binary neutron star coalescence candidate (later designated GW170817) with merger time 12:41:04 UTC was observed through gravitational waves by the Advanced LIGO and Advanced Virgo detectors. The Fermi Gamma-ray Burst Monitor independently detected a gamma-ray burst (GRB 170817A) with a time delay of ~1.7 s with respect to the merger time. From the gravitational-wave signal, the source was initially localized to a sky region of 31 deg2 at a luminosity distance of 40+8-8 Mpc and with component masses consistent with neutron stars. The component masses were later measured to be in the range 0.86 to 2.26 Mo. An extensive observing campaign was launched across the electromagnetic spectrum leading to the discovery of a bright optical transient (SSS17a, now with the IAU identification of AT 2017gfo) in NGC 4993 (at ~40 Mpc) less than 11 hours after the merger by the One- Meter, Two Hemisphere (1M2H) team using the 1 m Swope Telescope. The optical transient was independently detected by multiple teams within an hour. Subsequent observations targeted the object and its environment. Early ultraviolet observations revealed a blue transient that faded within 48 hours. Optical and infrared observations showed a redward evolution over ~10 days. Following early non-detections, X-ray and radio emission were discovered at the transient’s position ~9 and ~16 days, respectively, after the merger. Both the X-ray and radio emission likely arise from a physical process that is distinct from the one that generates the UV/optical/near-infrared emission. No ultra-high-energy gamma-rays and no neutrino candidates consistent with the source were found in follow-up searches. These observations support the hypothesis that GW170817 was produced by the merger of two neutron stars in NGC4993 followed by a short gamma-ray burst (GRB 170817A) and a kilonova/macronova powered by the radioactive decay of r-process nuclei synthesized in the ejecta

Global burden and strength of evidence for 88 risk factors in 204 countries and 811 subnational locations, 1990–2021: a systematic analysis for the Global Burden of Disease Study 2021

Background: Understanding the health consequences associated with exposure to risk factors is necessary to inform public health policy and practice. To systematically quantify the contributions of risk factor exposures to specific health outcomes, the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2021 aims to provide comprehensive estimates of exposure levels, relative health risks, and attributable burden of disease for 88 risk factors in 204 countries and territories and 811 subnational locations, from 1990 to 2021. Methods: The GBD 2021 risk factor analysis used data from 54 561 total distinct sources to produce epidemiological estimates for 88 risk factors and their associated health outcomes for a total of 631 risk–outcome pairs. Pairs were included on the basis of data-driven determination of a risk–outcome association. Age-sex-location-year-specific estimates were generated at global, regional, and national levels. Our approach followed the comparative risk assessment framework predicated on a causal web of hierarchically organised, potentially combinative, modifiable risks. Relative risks (RRs) of a given outcome occurring as a function of risk factor exposure were estimated separately for each risk–outcome pair, and summary exposure values (SEVs), representing risk-weighted exposure prevalence, and theoretical minimum risk exposure levels (TMRELs) were estimated for each risk factor. These estimates were used to calculate the population attributable fraction (PAF; ie, the proportional change in health risk that would occur if exposure to a risk factor were reduced to the TMREL). The product of PAFs and disease burden associated with a given outcome, measured in disability-adjusted life-years (DALYs), yielded measures of attributable burden (ie, the proportion of total disease burden attributable to a particular risk factor or combination of risk factors). Adjustments for mediation were applied to account for relationships involving risk factors that act indirectly on outcomes via intermediate risks. Attributable burden estimates were stratified by Socio-demographic Index (SDI) quintile and presented as counts, age-standardised rates, and rankings. To complement estimates of RR and attributable burden, newly developed burden of proof risk function (BPRF) methods were applied to yield supplementary, conservative interpretations of risk–outcome associations based on the consistency of underlying evidence, accounting for unexplained heterogeneity between input data from different studies. Estimates reported represent the mean value across 500 draws from the estimate's distribution, with 95% uncertainty intervals (UIs) calculated as the 2·5th and 97·5th percentile values across the draws. Findings: Among the specific risk factors analysed for this study, particulate matter air pollution was the leading contributor to the global disease burden in 2021, contributing 8·0% (95% UI 6·7–9·4) of total DALYs, followed by high systolic blood pressure (SBP; 7·8% [6·4–9·2]), smoking (5·7% [4·7–6·8]), low birthweight and short gestation (5·6% [4·8–6·3]), and high fasting plasma glucose (FPG; 5·4% [4·8–6·0]). For younger demographics (ie, those aged 0–4 years and 5–14 years), risks such as low birthweight and short gestation and unsafe water, sanitation, and handwashing (WaSH) were among the leading risk factors, while for older age groups, metabolic risks such as high SBP, high body-mass index (BMI), high FPG, and high LDL cholesterol had a greater impact. From 2000 to 2021, there was an observable shift in global health challenges, marked by a decline in the number of all-age DALYs broadly attributable to behavioural risks (decrease of 20·7% [13·9–27·7]) and environmental and occupational risks (decrease of 22·0% [15·5–28·8]), coupled with a 49·4% (42·3–56·9) increase in DALYs attributable to metabolic risks, all reflecting ageing populations and changing lifestyles on a global scale. Age-standardised global DALY rates attributable to high BMI and high FPG rose considerably (15·7% [9·9–21·7] for high BMI and 7·9% [3·3–12·9] for high FPG) over this period, with exposure to these risks increasing annually at rates of 1·8% (1·6–1·9) for high BMI and 1·3% (1·1–1·5) for high FPG. By contrast, the global risk-attributable burden and exposure to many other risk factors declined, notably for risks such as child growth failure and unsafe water source, with age-standardised attributable DALYs decreasing by 71·5% (64·4–78·8) for child growth failure and 66·3% (60·2–72·0) for unsafe water source. We separated risk factors into three groups according to trajectory over time: those with a decreasing attributable burden, due largely to declining risk exposure (eg, diet high in trans-fat and household air pollution) but also to proportionally smaller child and youth populations (eg, child and maternal malnutrition); those for which the burden increased moderately in spite of declining risk exposure, due largely to population ageing (eg, smoking); and those for which the burden increased considerably due to both increasing risk exposure and population ageing (eg, ambient particulate matter air pollution, high BMI, high FPG, and high SBP). Interpretation: Substantial progress has been made in reducing the global disease burden attributable to a range of risk factors, particularly those related to maternal and child health, WaSH, and household air pollution. Maintaining efforts to minimise the impact of these risk factors, especially in low SDI locations, is necessary to sustain progress. Successes in moderating the smoking-related burden by reducing risk exposure highlight the need to advance policies that reduce exposure to other leading risk factors such as ambient particulate matter air pollution and high SBP. Troubling increases in high FPG, high BMI, and other risk factors related to obesity and metabolic syndrome indicate an urgent need to identify and implement interventions

SPATIAL PATTERN OF TEMPORAL TREND OF CROP PHENOLOGY MATRICES OVER INDIA USING TIMESERIES GIMMS NDVI DATA (19826ndash;2006)

NOAA-AVHRR bi-monthly NDVI data of 8×8 km for the period of 1982–2006 were used to analyze the trend of crop phenology matrices over Indian region. Time series principal component analysis of NDVI was performed to produce six calibration zones for fitting equations of temporal NDVI profile. Savitzky-Golay filter with different seasonality parameters, adaptation strengths and window sizes for different calibration zones were use to smoothen the NDVI profile. Three crop phenology matrices i.e. start of the growing season (SGS), Seasonal NDVI amplitude (AMP), Seasonally Integrated NDVI (SiNDVI) were extracted using TIMESAT software. Direction and magnitude of trends of these crop phenology matrices were analyzed at pixel level using Mann-Kendall test. Further the trends was assessed at meteorological subdivisional level using "Field significance test". Significant advancement of SGS was observed over Punjab, Haryana, Marathwada, Vidarbha and Madhya Maharashtra where as delay was found over Rayalaseema, Coastal Andhra Pradesh, Bihar, Gangetic West Bengal and Sub-Himalayan West Bengal. North, West and central India covering Punjab, Haryana, West & East Uttar Pradesh, West & East Rajasthan, West & East Madhya Pradesh, Sourastra & Kutch, Rayalaseema, Marathwada, Vidarbha, Bihar and Sub-Himalayan West Bengal showed significant greening trend of kharif season. Most of the southern and eastern part of India covering Tamilnadu, South Interior Karnataka, Coastal Andhra Pradesh, Madhya Maharashtra, Gujarat region, Chhattisgarh, Jharkhand and Gangetic West Bengal showed significant browning trend during kharif season

Effect of oxide layer and the duration of exposure on the liquid metal corrosion mechanism of RAFM steel in molten Pb-Li

The long-term corrosion behavior of IN-RAFM steel in molten Pb-Li upto 10, 000 h of exposure was studied in a rotating disc corrosion test facility at 823 K. As-received IN-RAFMS material possessed an air-formed surface layer containing oxides of Fe, Ce and W. Precipitation of chromium carbides at the grain/lath boundaries of asreceived IN-RAFMS led to grain boundary attack by liquid Pb-Li during the initial ?Incubation Period? which depicted slow dissolution of surface oxides and lesser corrosion rate. Complete dissolution of oxide layer altered the corrosion mechanism from grain boundary attack to matrix dissolution thereby increasing the corrosion rate

Thigh-length compression stockings and DVT after stroke

Controversy exists as to whether neoadjuvant chemotherapy improves survival in patients with invasive bladder cancer, despite randomised controlled trials of more than 3000 patients. We undertook a systematic review and meta-analysis to assess the effect of such treatment on survival in patients with this disease

Rapid synthesis of pure phase bismuth ferrite through modified sol-gel auto-ignition method: Impact of different chelating agents

Pure phase bismuth ferrite has been successfully prepared in this research using a modified method of sol-gel auto-ignition. This method is a fast and economical synthesis technique since it can produce fine as-synthesis powder for less than 4 hours. Also, the influences of diverse chelating agents on the physicochemical properties of the synthesized samples were examined using various characterization techniques. XRD revealed that pure bismuth ferrite nanoparticles with rhombohedral perovskite structure were produced by using ascorbic acid (AA) as a chelating agent. From the UV spectra, a blue shift observed in the presence of AA and citric acid (CA). Moreover, the specific surface area of the as-prepared BFO-EDTA, BFO-AA and BFO-CA samples was 1.694, 1.134 and 1.627 m2/g, respectively, consistent with the XRD findings. Raman analysis shows that the synthesized BFO samples exhibit 4 A1 and 8E modes confirming Rhombohedral R3c geometry of bismuth ferrite nanoparticles. Finally, FTIR spectra depicted three absorption peaks at 410, 450, and 548 cm−1 corresponding to Fe−O stretching and bending, respectively, which is a characteristic of FeO6 octahedral in perovskite. The findings of this study would assist the researcher in the selection of chelating agents in the auto-combustion method for the processing of nanoparticles for particular applications