Disability and its influence in nutritional assessment tools in elderly people living in nursing homes

Introduction: Poor nutritional status is associated with increased morbidity and mortality, especially in older people. Objective: The aim of this study was to assess nutritional status in elderly nursing home residents with different nutritional test, and to determine which parameters used for nutritional assessment can be carried out in this population, which usually have a high prevalence of functionally dependent residents. Methods: A cross-sectional study was performed in 383 elderly. The nutritional assessment tools used were the Mini Nutritional Assessment (MNA), the new ESPEN consensus definition of malnutrition, and the tool for Controlling Nutritional Status (CONUT). Moreover, the ability to perform basic activities of daily living was assessed with the Barthel index (BI). Results: According to BI, 78.9% had a total dependence and only 20.9% could be weighed and heighed. The prevalence of malnutrition with MNA, ESPEN and CONUT was 21.3%, 17.6% and 20.7%, respectively. The agreement between MNA vs ESPEN criteria was moderate (?= 0.483), but with CONUT was low. Conclusions: Nursing homes had a high percentage of totally dependent residents. This high degree of functional dependence made difficult to obtain some anthropometric parameters such as weight and height, which are essential to carry out most nutritional tests. MNA, CONUT and the new ESPEN criteria of malnutrition showed a high prevalence of malnutrition and risk of malnutrition in subjects in which they could be performed. Introducción: un estado nutricional deficiente está asociado con un incremento de la morbilidad y la mortalidad, especialmente en personas ancianas. Objetivo: el objetivo de este estudio fue evaluar el estado nutricional en ancianos institucionalizados en residencias geriátricas mediante diferentes test nutricionales, y determinar qué parámetros utilizados en la valoración nutricional pueden ser realizados en esta población. Métodos: se llevó a cabo un estudio transversal en 383 ancianos. Las herramientas de valoración nutricional empleadas fueron el Mini Nutritional Assessment (MNA), el nuevo consenso de definición de malnutrición, y el CONUT. Además, la capacidad de realizar las actividades básicas de la vida diaria fue evaluada con el índice de Barthel. Resultados: según el índice de Barthel, hasta un 78, 9% de los residentes tenía una dependencia total, y en solo el 20, 9% se pudo determinar el peso y la talla. La prevalencia de malnutrición con MNA, el consenso de ESPEN y CONUT fueron 21, 3%, 17, 2% y 20, 7%, respectivamente. La concordancia (kappa) entre el MNA y el ESPEN fue moderada (? = 0, 483), pero con CONUT fue baja. Conclusiones: en las residencias geriátricas públicas existe un elevado porcentaje de ancianos totalmente dependientes. Este alto grado de dependencia funcional dificulta la obtención de algunos parámetros antropométricos como el peso y la talla, que son esenciales para llevar a cabo la mayoría de los test de valoración nutricional. El MNA, el CONUT y los nuevos criterios de desnutrición de la ESPEN mostraron una elevada prevalencia de desnutrición y de riesgo de desnutrición en esta población de ancianos institucionalizados, en aquellos en los que fue posible realizarlos

Effect of tool profile and fatigue loading on the local hardness around scratches in clad and unclad aluminium alloy 2024

Nanoindentation has been used to study the hardness changes produced by scratching of aluminium alloy AA2024, with and without a clad layer of pure aluminium. The hardness was mapped around scratches made with diamond tools of different profiles. One tool produced significant plastic damage with associated hardening at the scratch root, whilst the other produced a 'cleaner' cut with no hardening. The different behaviours and are attributed to whether the tool makes the scratch by a 'cutting' or a 'ploughing' mechanism. The degree of plastic damage around the scratches has been correlated with peak broadening data obtained using synchrotron X-ray diffraction. There was no change observed in the local hardness around the scratch with fatigue loading

Minimum information guideline for spectrophotometric and fluorometric methods to assess biofilm formation in microplates

Supplementary data to this article can be found online at https://doi.org/10.1016/j.bioflm.2019.100010.The lack of reproducibility of published studies is one of the major issues facing the scientific community, and the field of biofilm microbiology has been no exception. One effective strategy against this multifaceted problem is the use of minimum information guidelines. This strategy provides a guide for authors and reviewers on the necessary information that a manuscript should include for the experiments in a study to be clearly interpreted and independently reproduced. As a result of several discussions between international groups working in the area of biofilms, we present a guideline for the spectrophotometric and fluorometric assessment of biofilm formation in microplates. This guideline has been divided into 5 main sections, each presenting a comprehensive set of recommendations. The intention of the minimum information guideline is to improve the quality of scientific communication that will augment interlaboratory reproducibility in biofilm microplate assays.This project has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska – Curie grant agreement No 722467, as part of the Print-Aid consortium. The information and views set out in this article are those of the authors and do not necessarily reflect the official opinion of the European Union. Neither the European Union institutions and bodies nor any person acting on their behalf may be held responsible for the use which may be made of the information contained therein. This work received additional financial support by: project UID/EQU/00511/2019 - Laboratory for Process Engineering, Environment, Biotechnology and Energy – LEPABE funded by national funds through FCT/MCTES (PIDDAC); Project “LEPABE-2-ECO-INNOVATION” – NORTE-01-0145-FEDER-000005, funded by Norte Portugal Regional Operational Programme (NORTE 2020), under PORTUGAL 2020 Partnership Agreement, through the European Regional Development Fund (ERDF).info:eu-repo/semantics/publishedVersio

A Mathematical Model of Liver Cell Aggregation In Vitro

The behavior of mammalian cells within three-dimensional structures is an area of intense biological research and underpins the efforts of tissue engineers to regenerate human tissues for clinical applications. In the particular case of hepatocytes (liver cells), the formation of spheroidal multicellular aggregates has been shown to improve cell viability and functionality compared to traditional monolayer culture techniques. We propose a simple mathematical model for the early stages of this aggregation process, when cell clusters form on the surface of the extracellular matrix (ECM) layer on which they are seeded. We focus on interactions between the cells and the viscoelastic ECM substrate. Governing equations for the cells, culture medium, and ECM are derived using the principles of mass and momentum balance. The model is then reduced to a system of four partial differential equations, which are investigated analytically and numerically. The model predicts that provided cells are seeded at a suitable density, aggregates with clearly defined boundaries and a spatially uniform cell density on the interior will form. While the mechanical properties of the ECM do not appear to have a significant effect, strong cell-ECM interactions can inhibit, or possibly prevent, the formation of aggregates. The paper concludes with a discussion of our key findings and suggestions for future work

Binary solvent system used to fabricate fully annealing‐free perovskite solar cells

High temperature post-deposition annealing of hybrid lead halide perovskite thin films—typically lasting at least 10 min—dramatically limits the maximum roll-to-roll coating speed, which determines solar module manufacturing costs. While several approaches for “annealing-free” perovskite solar cells (PSCs) have been demonstrated, many are of limited feasibility for scalable fabrication. Here, this work has solvent-engineered a high vapor pressure solvent mixture of 2-methoxy ethanol and tetrahydrofuran to deposit highly crystalline perovskite thin-films at room temperature using gas-quenching to remove the volatile solvents. Using this approach, this work demonstrates p-i-n devices with an annealing-free MAPbI3 perovskite layer achieving stabilized power conversion efficiencies (PCEs) of up to 18.0%, compared to 18.4% for devices containing an annealed perovskite layer. This work then explores the deposition of self-assembled molecules as the hole-transporting layer without annealing. This work finally combines the methods to create fully annealing-free devices having stabilized PCEs of up to 17.1%. This represents the state-of-the-art for annealing-free fabrication of PSCs with a process fully compatible with roll-to-roll manufacture

LSST: from Science Drivers to Reference Design and Anticipated Data Products

(Abridged) We describe here the most ambitious survey currently planned in the optical, the Large Synoptic Survey Telescope (LSST). A vast array of science will be enabled by a single wide-deep-fast sky survey, and LSST will have unique survey capability in the faint time domain. The LSST design is driven by four main science themes: probing dark energy and dark matter, taking an inventory of the Solar System, exploring the transient optical sky, and mapping the Milky Way. LSST will be a wide-field ground-based system sited at Cerro Pach\'{o}n in northern Chile. The telescope will have an 8.4 m (6.5 m effective) primary mirror, a 9.6 deg$^2$ field of view, and a 3.2 Gigapixel camera. The standard observing sequence will consist of pairs of 15-second exposures in a given field, with two such visits in each pointing in a given night. With these repeats, the LSST system is capable of imaging about 10,000 square degrees of sky in a single filter in three nights. The typical 5$\sigma$ point-source depth in a single visit in $r$ will be $\sim 24.5$ (AB). The project is in the construction phase and will begin regular survey operations by 2022. The survey area will be contained within 30,000 deg$^2$ with $\delta<+34.5^\circ$, and will be imaged multiple times in six bands, $ugrizy$, covering the wavelength range 320--1050 nm. About 90\% of the observing time will be devoted to a deep-wide-fast survey mode which will uniformly observe a 18,000 deg$^2$ region about 800 times (summed over all six bands) during the anticipated 10 years of operations, and yield a coadded map to $r\sim27.5$. The remaining 10\% of the observing time will be allocated to projects such as a Very Deep and Fast time domain survey. The goal is to make LSST data products, including a relational database of about 32 trillion observations of 40 billion objects, available to the public and scientists around the world.Comment: 57 pages, 32 color figures, version with high-resolution figures available from https://www.lsst.org/overvie

An exploration of the use of infant observation methods to research the identities of severely learning disabled adolescents and to enhance relationship-based practice for professional social work practice

This paper considers how infant observation methods may be adapted to explore and research the identities of severely learning disabled adolescents, a group of young people whose experiences are poorly represented in the literature. Through focusing on emotion and relationship, this ‘practice-near’ research method also offers a way for social workers to develop their reflective capacity in relation to the often hidden, uncomfortable emotions aroused by experiencing impairment and difference, but without the defences usually involved in assuming the professional role. The importance of taking time to get on a disabled child’s ‘wavelength’ is illustrated through extracts from the research which show how a young person’s agency and identity can be appreciated. The method also has the potential to develop social workers’ awareness of the powerful undercurrent of emotions apparent at times within families of severely disabled young people and tentative suggestions are made about the projective processes and hidden hostilities at work within one of the families observed as part of the research project. Professionals may be able to use this knowledge to become resilient and reflective practitioners and the observation method itself has something to offer by way of a containing experience for families

Measurement of the Bottom-Strange Meson Mixing Phase in the Full CDF Data Set

We report a measurement of the bottom-strange meson mixing phase \beta_s using the time evolution of B0_s -> J/\psi (->\mu+\mu-) \phi (-> K+ K-) decays in which the quark-flavor content of the bottom-strange meson is identified at production. This measurement uses the full data set of proton-antiproton collisions at sqrt(s)= 1.96 TeV collected by the Collider Detector experiment at the Fermilab Tevatron, corresponding to 9.6 fb-1 of integrated luminosity. We report confidence regions in the two-dimensional space of \beta_s and the B0_s decay-width difference \Delta\Gamma_s, and measure \beta_s in [-\pi/2, -1.51] U [-0.06, 0.30] U [1.26, \pi/2] at the 68% confidence level, in agreement with the standard model expectation. Assuming the standard model value of \beta_s, we also determine \Delta\Gamma_s = 0.068 +- 0.026 (stat) +- 0.009 (syst) ps-1 and the mean B0_s lifetime, \tau_s = 1.528 +- 0.019 (stat) +- 0.009 (syst) ps, which are consistent and competitive with determinations by other experiments.Comment: 8 pages, 2 figures, Phys. Rev. Lett 109, 171802 (2012

Measurement of the polarisation of W bosons produced with large transverse momentum in pp collisions at sqrt(s) = 7 TeV with the ATLAS experiment

This paper describes an analysis of the angular distribution of W->enu and W->munu decays, using data from pp collisions at sqrt(s) = 7 TeV recorded with the ATLAS detector at the LHC in 2010, corresponding to an integrated luminosity of about 35 pb^-1. Using the decay lepton transverse momentum and the missing transverse energy, the W decay angular distribution projected onto the transverse plane is obtained and analysed in terms of helicity fractions f0, fL and fR over two ranges of W transverse momentum (ptw): 35 < ptw < 50 GeV and ptw > 50 GeV. Good agreement is found with theoretical predictions. For ptw > 50 GeV, the values of f0 and fL-fR, averaged over charge and lepton flavour, are measured to be : f0 = 0.127 +/- 0.030 +/- 0.108 and fL-fR = 0.252 +/- 0.017 +/- 0.030, where the first uncertainties are statistical, and the second include all systematic effects.Comment: 19 pages plus author list (34 pages total), 9 figures, 11 tables, revised author list, matches European Journal of Physics C versio