Enhanced Power Conversion Efficiency via Hybrid Ligand Exchange Treatment of p-Type PbS Quantum Dots.

PbS quantum dot solar cells (QDSCs) have emerged as a promising low-cost, solution-processable solar energy harvesting device and demonstrated good air stability and potential for large-scale commercial implementation. PbS QDSCs achieved a record certified efficiency of 12% in 2018 by utilizing an n+-n-p device structure. However, the p-type layer has generally suffered from low carrier mobility due to the organic ligand 1,2-ethanedithiol (EDT) that is used to modify the quantum dot (QD) surface. The low carrier mobility of EDT naturally limits the device thickness as the carrier diffusion length is limited by the low mobility. Herein, we improve the properties of the p-type layer through a two-step hybrid organic ligand treatment. By treating the p-type layer with two types of ligands, 3-mercaptopropionic acid (MPA) and EDT, the PbS QD surface was passivated by a combination of the two ligands, resulting in an overall improvement in open-circuit voltage, fill factor, and current density, leading to an improvement in the cell efficiency from 7.0 to 10.4% for the champion device. This achievement was a result of the improved QD passivation and a reduction in the interdot distance, improving charge transport through the p-type PbS quantum dot film

Reverse electrowetting as a new approach to high-power energy harvesting

Over the last decade electrical batteries have emerged as a critical bottleneck for portable electronics development. High-power mechanical energy harvesting can potentially provide a valuable alternative to the use of batteries, but, until now, a suitable mechanical-to-electrical energy conversion technology did not exist. Here we describe a novel mechanical-to-electrical energy conversion method based on the reverse electrowetting phenomenon. Electrical energy generation is achieved through the interaction of arrays of moving microscopic liquid droplets with novel nanometer-thick multilayer dielectric films. Advantages of this process include the production of high power densities, up to 103 W m−2; the ability to directly utilize a very broad range of mechanical forces and displacements; and the ability to directly output a broad range of currents and voltages, from several volts to tens of volts. These advantages make this method uniquely suited for high-power energy harvesting from a wide variety of environmental mechanical energy sources

Dynamic light diffusion, Anderson localization and lasing in disordered inverted opals: 3D ab-initio Maxwell-Bloch computation

We report on 3D time-domain parallel simulations of Anderson localization of light in inverted disordered opals displaying a complete photonic band-gap. We investigate dynamic diffusion processes induced by femtosecond laser excitations, calculate the diffusion constant and the decay-time distribution versus the strength of the disorder. We report evidence of the transition from delocalized Bloch oscillations to strongly localized resonances in self-starting laser processes.Comment: 4 pages, 5 figure

Pan-cancer analysis of whole genomes

Cancer is driven by genetic change, and the advent of massively parallel sequencing has enabled systematic documentation of this variation at the whole-genome scale(1-3). Here we report the integrative analysis of 2,658 whole-cancer genomes and their matching normal tissues across 38 tumour types from the Pan-Cancer Analysis of Whole Genomes (PCAWG) Consortium of the International Cancer Genome Consortium (ICGC) and The Cancer Genome Atlas (TCGA). We describe the generation of the PCAWG resource, facilitated by international data sharing using compute clouds. On average, cancer genomes contained 4-5 driver mutations when combining coding and non-coding genomic elements; however, in around 5% of cases no drivers were identified, suggesting that cancer driver discovery is not yet complete. Chromothripsis, in which many clustered structural variants arise in a single catastrophic event, is frequently an early event in tumour evolution; in acral melanoma, for example, these events precede most somatic point mutations and affect several cancer-associated genes simultaneously. Cancers with abnormal telomere maintenance often originate from tissues with low replicative activity and show several mechanisms of preventing telomere attrition to critical levels. Common and rare germline variants affect patterns of somatic mutation, including point mutations, structural variants and somatic retrotransposition. A collection of papers from the PCAWG Consortium describes non-coding mutations that drive cancer beyond those in the TERT promoter(4); identifies new signatures of mutational processes that cause base substitutions, small insertions and deletions and structural variation(5,6); analyses timings and patterns of tumour evolution(7); describes the diverse transcriptional consequences of somatic mutation on splicing, expression levels, fusion genes and promoter activity(8,9); and evaluates a range of more-specialized features of cancer genomes(8,10-18).Peer reviewe

Kinetics studies of thin film amorphous titanium niobium oxides for lithium ion battery anodes

Amorphous titanium niobium oxides (TNOs) with varying ratios of Ti and Nb (Ti4Nb2O13, Ti2Nb2O9 and TiNb2O7) are presented as promising anode materials for Li ion batteries. The capacity of the TNO materials is seen to be equivalent to, or larger than, that of the binary oxides, with average volumetric capacities over the first 10 cycles of 717, 1,039 and 925 mAh cm−3 for amorphous Ti4Nb2O13, Ti2Nb2O9 and TiNb2O7, respectively at a current density of 0.2 A cm−3, compared to 720 mAh cm−3 and 425 mAh cm−3 for amorphous TiO2 and Nb2O5. Using densities estimated with X-ray reflectometry, these are equivalent to gravimetric capacities of 231, 335, 319 mAh g−1 for amorphous Ti4Nb2O13, Ti2Nb2O9 and TiNb2O7, respectively at a current density of ~70 mA g−1, compared to 257 mAh g−1 and 137 mAh g−1 for amorphous TiO2 and Nb2O5 at a current density ~80 mA g−1 and ~50 mA g−1, respectively. We discuss how rate capability varies with varying ratios of Ti and Nb and relate this to electrochemical parameters determined by the potentiostatic intermittent titration technique. Our findings reveal that the rate capability of the films is dominated by the diffusion resistance, RD, a composite parameter linked to the insertion rate and diffusion coefficient of Li, leading to a conclusion that the rate retention of the thin films is dominated by the density of insertion sites and the insertion reaction more generally

Synthesis of intertwined Zn0.5Mn0.5Fe2O4@CNT composites as a superior anode material for Li-ion batteries

Nanocrystalline ZnFe2O4, Zn0.5Mn0.5Fe2O4, and Zn0.5Mn0.5Fe2O4@CNT composites have been successfully prepared by a facile and high-yield co-precipitation method. All the samples as the anode materials were characterized by X-ray diffraction, thermogravimetry, and electrochemical measurements. It has been found that the appropriate Mn doping and CNTs intertwining actively affect the formation of uniform morphology and improve the cycling stability and rate capability. The Zn0.5Mn0.5Fe2O4@CNT composites exhibit excellent electrochemical performance as the anode material, with enhanced reversible capacity (1374.8 mAh g−1 after 100 cycles at the current density of 100 mA g−1) and good rate capability (933.5 mAh g−1 at 500 mA g−1, 809.9 mAh g−1 at 1000 mA g−1, 634.2 mAh g−1 at 1500 mA g−1). We also present the crystal structure and Li-ion insertion mechanism for the above materials. Graphical Abstract: Our work displays the Li storage matrix model of the ZMFO electrode which may offer a novel way for the investigation of the LIBs with excellent electrochemical performance and perfect structural stability.Department of Electrical Engineerin

Mapping DNA methylation with high-throughput nanopore sequencing

DNA chemical modifications regulate genomic function. We present a framework for mapping cytosine and adenosine methylation with the Oxford Nanopore Technologies MinION using this nanopore sequencer's ionic current signal. We map three cytosine variants and two adenine variants. The results show that our model is sensitive enough to detect changes in genomic DNA methylation levels as a function of growth phase in Escherichia coli