694 research outputs found

    Рецидив гетеротопической оссификации в результате вывиха эндопротеза тазобедренного сустава: клинический случай

    Get PDF
    Background. Heterotopic ossification (HO) is the formation of mature bone in soft tissues. HO in the hip area can be a consequence of both injury to the nervous system and local trauma. After total hip arthroplasty HO develops in 30% of cases. The aim of the study is to demonstrate a rare clinical case of a recurrence of HO in patient after a primary total hip arthroplasty, accompanied by ankylosing. Case presentation. A 32-year-old patient was admitted to the clinic for revision hip arthroplasty with a diagnosis long-standing dislocation of the right hip joint endoprosthesis head, heterotopic ossification 3 years after dislocation. During the surgery, there were difficulties with the sciatic nerve dissection, as well as the structures of the endoprosthesis. We removed all the ossifications that obstructed the dislocation of the endoprosthesis. The patient had sciatic nerve neuropathy on the right lower limb with lesions of the fibular and tibial nerves on the background of edema. The patient was discharged on the 21st day. The presented clinical case is interesting because the patients relapse could be caused by a combination of various risk factors. Taking into account the fact that the injury was received as a result of an accident and the patient had a fracture of the bones of the contralateral shin, it could be the effect of a local hip injury that aggravated the process. Conclusions. This clinical observation highlights the importance of preventing possible complications after surgery and maintaining feedback with patients, especially those belonging to the high-risk group. It is likely that with adequate prevention of the HO formation and timely reduction of dislocation, the problems described in the article after primary total hip arthroplasty could have been avoided.Актуальность. Гетеротопическая оссификация (ГО) это формирование зрелой кости в мягких тканях. ГО в области тазобедренного сустава может быть следствием как повреждения нервной системы, так и локальной травмы. После тотального эндопротезирования тазобедренного сустава ГО развивается в 30% наблюдений. Целью публикации является демонстрация редкого клинического наблюдения пациента с рецидивом ГО после сложного первичного эндопротезирования тазобедренного сустава, сопровождающимся анкилозированием. Описание случая. Пациент 32 лет поступил в клинику для ревизионного эндопротезирования тазобедренного сустава с диагнозом застарелый вывих головки эндопротеза правого тазобедренного сустава, гетеротопическая оссификация спустя 3 года после вывиха. Во время операции были сложности с выделением седалищного нерва, а также структур эндопротеза. Нами были удалены все оссификаты, которые препятствовали вывиху эндопротеза. У пациента наблюдалась невропатия седалищного нерва справа с поражением малоберцового и большеберцового нервов на фоне отека. Пациент был выписан на 21-й день. Представленный клинический случай интересен тем, что у пациента рецидив ГО мог быть обусловлен комбинацией различных факторов риска. С учетом того, что травма была получена в результате ДТП и у пациента имелся перелом костей контралатеральной голени, нельзя исключить эффект местной травмы тазобедренного сустава, усугубившей процесс. Заключение. Данное клиническое наблюдение подчеркивает важность профилактики вероятных осложнений после операции и поддержания обратной связи с пациентами, особенно относящимися к группе высокого риска. Вполне вероятно, что при адекватной профилактике формирования ГО и своевременном вправлении вывиха описанных в статье проблем после первичного эндопротезирования удалось бы избежать

    One-shot learning with triplet loss for vegetation classification tasks

    Get PDF
    Triplet loss function is one of the options that can significantly improve the accuracy of the One-shot Learning tasks. Starting from 2015, many projects use Siamese networks and this kind of loss for face recognition and object classification. In our research, we focused on two tasks related to vegetation. The first one is plant disease detection on 25 classes of five crops (grape, cotton, wheat, cucumbers, and corn). This task is motivated because harvest losses due to diseases is a serious problem for both large farming structures and rural families. The second task is the identification of moss species (5 classes). Mosses are natural bioaccumulators of pollutants; therefore, they are used in environmental monitoring programs. The identification of moss species is an important step in the sample preprocessing. In both tasks, we used self-collected image databases. We tried several deep learning architectures and approaches. Our Siamese network architecture with a triplet loss function and MobileNetV2 as a base network showed the most impressive results in both above-mentioned tasks. The average accuracy for plant disease detection amounted to over 97.8% and 97.6% for moss species classification.A.V.U. and A.V.N. gratefully acknowledge financial support from the Ministry of Science and Higher Education of the Russian Federation in accordance with agreement No 075-15-2020-905 dated November 16, 2020 on providing a grant in the form of subsidies from the Federal budget of Russian Federation. The grant was provided for state support for the creation and development of a World-class Scientific Center "Agrotechnologies for the Future". The database creation part of the reported study was funded by RFBR according to the research project No 18-07-00829

    Ladle and In-mold Modification Methods for Obtaining Castings from Cast Irons with Various Graphite Morphology

    No full text
    Introduction. In the world practice of foundry, modification has reached the status of leading direction of research and applied work to improve the technological and service properties of structural cast irons. Problem Statement. Modifying treatment of liquid iron provides for not only the creation of certain types of modifiers, but also for the development of such methods for introducing modifier into the melt, which are adaptable to the conditions of foundries and take into account the requirements for specific groups of castings. Purpose. To develop a pilot technology for the modification of electric furnace melts of cast iron in unsealed ladle with removable bowl caver and casting molds using complex reagents in the form of pressed powder briquettes and lumpy fused master alloys for the production of castings with lamellar, vermicular and spherical graphite. Materials and Methods. The following materials have been used in the research: gray cast iron, as an object of research for modifying treatment, magnesium-lanthanum-containing lumpy and briquetted powder modifiers, as well as nitrogencontaining lumpy and briquetted powder modifiers to produce cast iron with various forms of graphite, depending on the requirements for castings. Results. A pilot technology for cast irons using pressed powder nitriding briquettes to increase twice the tensile strength of structural gray cast irons (from 200 MPa to 400 MPa) without alloying and heat treatment and a ladle process for modifying molten iron melts with lanthanum-containing modifiers have been developed. The prospects for the production of nitrated iron with vermicular graphite with a sulfur content of up to 0.1% wt. by re-melting the nitrogenous metal charge and fresh and rotary cast irons and therefore with the possible minimum additional introduction of nitrogen in the furnace or in the ladle or in the mold have been substantiated. Conclusions. The pressed powder composite modifiers are recommended as the most effective ones for the mentioned modifying methods, depending on the requirements for castings.Вступ. У світовій практиці ливарного виробництва модифікування досягло статусу провідного напряму науково-дослідних та прикладних робіт з поліпшення технологічних і службових властивостей конструкційних чавунів. Проблематика. Модифікуюча обробка рідких чавунів передбачає створення не тільки певних типів модифі каторів, а й розробку таких способів введення модифікатора в розплав, які адаптовані до умов ливарних цехів, а також враховують вимоги до конкретних груп виливків. Мета. Розробка дослідної технології модифікування електропічних розплавів чавуну в негерметизованих поворотних ківшах і ливарних формах з використанням комплексних реагентів у вигляді пресованих порошкових брикетів і кускових плавлених лігатур для отримання виливків з пластинчастим, вермикулярним і кулястим графітом. Матеріали й методи. Сірий чавун як об'єкт дослідження модифікуючої обробки, магній-лантанвміщуючі кускові та брикетовані порошкові модифікатори, а також азотовмісні кускові й брикетовані порошкові модифікатори для отримання чавунів з різною формою графіту залежно від вимог до виливків. Результати. Розроблено дослідну ківшову технологію азотування чавунів з використанням пресованих порошкових азотвміщуючих брикетів, що дозволяє підвищити тимчасову розривну міцність сірих конструкційних чавунів вдвічі — з 200 МПа до 400 МПа, без легування й термічної обробки, а також розроблено ковшовий процес модифікування розплавів чавунів магній-лантанвміщуючими модифікаторами. Обґрунтовано перспективність виробництва азотованого чавуну з вермикулярним графітом з вмістом сірки до 0,1 % мас. шляхом переплавлення азотної металошихти, а також свіжих і поворотних чавунів, з мінімальним додатковим введенням азоту в піч, ківш чи ливарну форму. Висновки. Пресовані порошкові модифікатори рекомендовано до використання як найбільш ефективні для вказаних способів модифікування залежно від вимог до виливків.Введение. В мировой практике литейного производства модифицирование достигло статуса ведущего направления научно-исследовательских и прикладных работ по улучшению технологических и служебных свойств конструкционных чугунов. Проблематика. Модифицирующая обработка жидких чугунов предусматривает создание не только определенных типов модификаторов, но и разработку таких способов ввода модификатора в расплав, которые адаптированы к условиям литейных цехов, а также учитывают требования к конкретным группам отливок. Цель. Разработка опытной технологии модифицирования электропечных расплавов чугуна в негерметизированных поворотных ковшах и литейных формах с использованием комплексных реагентов в виде прессованных порошковых брикетов и кусковых плавленых лигатур для получения отливок с пластинчатым, вермикулярным и шаровидным графитом. Материалы и методы. Серый чугун, как объект исследования модифицирующей обработки, магний-лантансодержащие кусковые и брикетированные порошковые модификаторы, а также азотсодержащие кусковые и брикетированные порошковые модификаторы для получения чугунов с различной формой графита, в зависимости от предъявляемых требований к отливкам. Результаты. Разработана опытная ковшовая технология азотирования чугунов с использованием прессованных порошковых азотирующих брикетов, позволяющая повысить временную разрывную прочность серых конструкционных чугунов вдвое — с 200 МПа до 400 МПа, без легирования и термической обработки, а также разработан ковшовый процесс модифицирования расплавов чугунов лантансодержащими модификаторами. Обоснована перспективность производства азотированного чугуна с вермикулярным графитом с содержанием серы до 0.1 % масс. путем переплава азотистой металлошихты, а также свежих и возвратных чугунов, что минимизирует дополнительное введение азота в печь, ковш или литейную форму. Выводы. Прессованные порошковые модификаторы рекомендованы к использованию как наиболее эффективные для указанных способов модифицирования в зависимости от требований к отливкам

    Reversible Pressure-Induced Amorphization in Solid C70 : Raman and Photoluminescence Study

    Full text link
    We have studied single crystals of C70C_{70} by Raman scattering and photoluminescence in the pressure range from 0 to 31.1 GPa. The Raman spectrum at 31.1 GPa shows only a broad band similar to that of the amorphous carbon without any trace of the Raman lines of C70C_{70}. After releasing the pressure from 31.1 GPa, the Raman and the photoluminescence spectra of the recovered sample are that of the starting C70C_{70} crystal. These results indicate that the C70C_{70} molecules are stable upto 31.1 GPa and the amorphous carbon high pressure phase is reversible, in sharp contrast to the results on solid C60C_{60}. A qualitative explaination is suggested in terms of inter- versus intra-molecular interactions.Comment: To appear in Phys. Rev. Lett., 12 pages, RevTeX (preprint format), 3 figures available upon reques

    The first dozen years of the history of ITEP Theoretical Physics Laboratory

    Full text link
    The theoretical investigations at ITEP in the years 1945-1958 are reviewed. There are exposed the most important theoretical results, obtained in the following branches of physics: 1) the theory of nuclear reactors on thermal neutrons; 2) the hydrogen bomb project ("Tube" in USSR and "Classical Super" in USA); 3) radiation theory; ~4) low temperature physics; 5) quantum electrodynamics and quantum field theories; 6) parity violation in weak interactions, the theory of β\beta-decay and other weak processes; 7) strong interaction and nuclear physics. To the review are added the English translations of few papers, originally published in Russian, but unknown (or almost unknown) to Western readers.Comment: 55 pages, 5 fig

    Evidence of Color Coherence Effects in W+jets Events from ppbar Collisions at sqrt(s) = 1.8 TeV

    Full text link
    We report the results of a study of color coherence effects in ppbar collisions based on data collected by the D0 detector during the 1994-1995 run of the Fermilab Tevatron Collider, at a center of mass energy sqrt(s) = 1.8 TeV. Initial-to-final state color interference effects are studied by examining particle distribution patterns in events with a W boson and at least one jet. The data are compared to Monte Carlo simulations with different color coherence implementations and to an analytic modified-leading-logarithm perturbative calculation based on the local parton-hadron duality hypothesis.Comment: 13 pages, 6 figures. Submitted to Physics Letters

    Shrinking a large dataset to identify variables associated with increased risk of Plasmodium falciparum infection in Western Kenya

    Get PDF
    Large datasets are often not amenable to analysis using traditional single-step approaches. Here, our general objective was to apply imputation techniques, principal component analysis (PCA), elastic net and generalized linear models to a large dataset in a systematic approach to extract the most meaningful predictors for a health outcome. We extracted predictors for Plasmodium falciparum infection, from a large covariate dataset while facing limited numbers of observations, using data from the People, Animals, and their Zoonoses (PAZ) project to demonstrate these techniques: data collected from 415 homesteads in western Kenya, contained over 1500 variables that describe the health, environment, and social factors of the humans, livestock, and the homesteads in which they reside. The wide, sparse dataset was simplified to 42 predictors of P. falciparum malaria infection and wealth rankings were produced for all homesteads. The 42 predictors make biological sense and are supported by previous studies. This systematic data-mining approach we used would make many large datasets more manageable and informative for decision-making processes and health policy prioritization

    Improved W boson mass measurement with the D0 detector

    Get PDF
    We have measured the W boson mass using the D0 detector and a data sample of 82 pb^-1 from the Tevatron collider. This measurement used W -> e nu decays, where the electron is close to a boundary of a central electromagnetic calorimeter module. Such 'edge' electrons have not been used in any previous D0 analysis, and represent a 14% increase in the W boson sample size. For these electrons, new response and resolution parameters are determined, and revised backgrounds and underlying event energy flow measurements are made. When the current measurement is combined with previous D0 W boson mass measurements, we obtain M_W = 80.483 +/- 0.084 GeV. The 8% improvement from the previous D0 measurement is primarily due to the improved determination of the response parameters for non-edge electrons using the sample of Z bosons with non-edge and edge electrons.Comment: submitted to Phys. Rev. D; 20 pages, 18 figures, 9 table

    Global Search for New Physics with 2.0/fb at CDF

    Get PDF
    Data collected in Run II of the Fermilab Tevatron are searched for indications of new electroweak-scale physics. Rather than focusing on particular new physics scenarios, CDF data are analyzed for discrepancies with the standard model prediction. A model-independent approach (Vista) considers gross features of the data, and is sensitive to new large cross-section physics. Further sensitivity to new physics is provided by two additional algorithms: a Bump Hunter searches invariant mass distributions for "bumps" that could indicate resonant production of new particles; and the Sleuth procedure scans for data excesses at large summed transverse momentum. This combined global search for new physics in 2.0/fb of ppbar collisions at sqrt(s)=1.96 TeV reveals no indication of physics beyond the standard model.Comment: 8 pages, 7 figures. Final version which appeared in Physical Review D Rapid Communication

    Observation of Orbitally Excited B_s Mesons

    Get PDF
    We report the first observation of two narrow resonances consistent with states of orbitally excited (L=1) B_s mesons using 1 fb^{-1} of ppbar collisions at sqrt{s} = 1.96 TeV collected with the CDF II detector at the Fermilab Tevatron. We use two-body decays into K^- and B^+ mesons reconstructed as B^+ \to J/\psi K^+, J/\psi \to \mu^+ \mu^- or B^+ \to \bar{D}^0 \pi^+, \bar{D}^0 \to K^+ \pi^-. We deduce the masses of the two states to be m(B_{s1}) = 5829.4 +- 0.7 MeV/c^2 and m(B_{s2}^*) = 5839.7 +- 0.7 MeV/c^2.Comment: Version accepted and published by Phys. Rev. Let
    corecore