Modelling and performance of Nb SIS mixers in the 1.3 mm and 0.8 mm bands

We describe the modeling and subsequent improvements of SIS waveguide mixers for the 200-270 and 330-370 GHz bands (Blundell, Carter, and Gundlach 1988, Carter et al 1991). These mixers are constructed for use in receivers on IRAM radiotelescopes on Pico Veleta (Spain, Sierra Nevada) and Plateau de Bure (French Alps), and must meet specific requirements. The standard reduced height waveguide structure with suspended stripline is first analyzed and a model is validated through comparison with scale model and working scale measurements. In the first step, the intrinsic limitations of the standard mixer structure are identified, and the parameters are optimized bearing in mind the radioastronomical applications. In the second step, inductive tuning of the junctions is introduced and optimized for minimum noise and maximum bandwidth. In the 1.3 mm band, a DSB receiver temperature of less than 110 K (minimum 80 K) is measured from 180 through 260 GHz. In the 0.8 mm band, a DSB receiver temperature of less than 250 K (minimum 175 K) is obtained between 325 and 355 GHz. All these results are obtained with room-temperature optics and a 4 GHz IF chain having a 500 MHz bandwidth and a noise temperature of 14 K

Quantifying ultrasonic deformation of cell membranes with ultra-high-speed imaging

We present a new method for controllable loading of cell models in an ultrasonic (20 kHz) regime. The protocol is based on the inertial-based ultrasonic shaking test and allows to deform cells in the range of few mm/m to help understand potential consequences of repeated loading characteristic of ultrasonic cutting

Mechanisms of root reinforcement in soils:An experimental methodology using four-dimensional X-ray computed tomography and digital volume correlation

Vegetation on railway or highway slopes can improve slope stability through the generation of soil pore water suctions by plant transpiration and mechanical soil reinforcement by the roots. To incorporate the enhanced shearing resistance and stiffness of root-reinforced soils in stability calculations, it is necessary to understand and quantify its effectiveness. This requires integrated and sophisticated experimental and multiscale modelling approaches to develop an understanding of the processes at different length scales, from individual root-soil interaction through to full soil-profile or slope scale. One of the challenges with multiscale models is ensuring that they sufficiently closely represent real behaviour. This requires calibration against detailed high-quality and data-rich experiments. This study presents a novel experimental methodology, which combines in situ direct shear loading of a willow root reinforced soil with X-ray computed tomography to capture the 3D chronology of soil and root deformation within the shear zone. Digital volume correlation (DVC) analysis was applied to the computed tomography (CT) dataset to obtain full-field 3D displacement and strain information. This paper demonstrates the feasibility and discusses the challenges associated with DVC experiments on root-reinforced soils

Unlocking the Value of Stockpiled Mobile Handsets: a Delphi Evaluation of Factors Influencing End of Use

Meeting consumers’ demands for electrical and electronic equipment (EEE) products in the face of diminishing natural resources necessitate a shift from take-make-dispose to circular economy approaches. Mobile handsets are ubiquitous but only a fraction are returned into the economy at the end; many are locked in consumers' households. These small EEE hold residual value as well as critical resources, such as Rare Earth Elements. Incentives for destockpiling exist but are insufficient to alter long-term end-of-use behaviour. Household recycling behaviour tends to be used as a template for EEE end-of-use. But established explanatory factors for household recycling might not be fully relevant for small electronic devices: their size permits stockpiling, whilst their continued utility can encourage retention as back-up or “safety” devices. This study aimed to elucidate the relevance of factors specific to the nature of small EEE, notably their physical characteristics and working order. A panel of academics and professionals from the global waste and resource management sector was consulted using Delphi methods. The results show that factors commonly applied to foster recycling, such as altruism or pro-environmental behaviour, do not necessarily apply to small EEE. On the other hand, the device’s features and working order are critical factors in the end-of-use decision-making process. This study concludes that practical and situational factors should be used to favourably alter decisions for small EEE, including devices’ characteristics. In effect, updated situational factors could unlock a global “destockpile lifestyle” to realise full value from the reuse and recycling of small EEE

Identification of plastic constitutive parameters at large deformations from three dimensional displacement fields

The aim of this paper is to provide a general procedure to extract the constitutive parameters of a plasticity model starting from displacement measurements and using the Virtual Fields Method. This is a classical inverse problem which has been already investigated in the literature, however several new features are developed here. First of all the procedure applies to a general three-dimensional displacement field which leads to large plastic deformations, no assumptions are made such as plane stress or plane strain although only pressure-independent plasticity is considered. Moreover the equilibrium equation is written in terms of the deviatoric stress tensor that can be directly computed from the strain field without iterations. Thanks to this, the identification routine is much faster compared to other inverse methods such as finite element updating. The proposed method can be a valid tool to study complex phenomena which involve severe plastic deformation and where the state of stress is completely triaxial, e.g. strain localization or necking occurrence. The procedure has been validated using a three dimensional displacement field obtained from a simulated experiment. The main potentialities as well as a first sensitivity study on the influence of measurement errors are illustrated

Magnetic properties of X-Pt (X=Fe,Co,Ni) alloy systems

We have studied the electronic and magnetic properties of Fe-Pt, Co-Pt and Ni-Pt alloy systems in ordered and disordered phases. The influence of various exchange-correlation functionals on values of equilibrium lattice parameters and magnetic moments in ordered Fe-Pt, Co-Pt and Ni-Pt alloys have been studied using linearized muffin-tin orbital method. The electronic structure calculations for the disordered alloys have been carried out using augmented space recursion technique in the framework of tight binding linearized muffin-tin orbital method. The effect of short range order has also been studied in the disordered phase of these systems. The results show good agreements with available experimental values.Comment: 21 pages, 4 eps figures, accepted for publication in Journal of Physics Condensed Matte

Mutation Rate Switch inside Eurasian Mitochondrial Haplogroups: Impact of Selection and Consequences for Dating Settlement in Europe

R-lineage mitochondrial DNA represents over 90% of the European population and is significantly present all around the planet (North Africa, Asia, Oceania, and America). This lineage played a major role in migration “out of Africa” and colonization in Europe. In order to determine an accurate dating of the R lineage and its sublineages, we analyzed 1173 individuals and complete mtDNA sequences from Mitomap. This analysis revealed a new coalescence age for R at 54.500 years, as well as several limitations of standard dating methods, likely to lead to false interpretations. These findings highlight the association of a striking under-accumulation of synonymous mutations, an over-accumulation of non-synonymous mutations, and the phenotypic effect on haplogroup J. Consequently, haplogroup J is apparently not a Neolithic group but an older haplogroup (Paleolithic) that was subjected to an underestimated selective force. These findings also indicated an under-accumulation of synonymous and non-synonymous mutations localized on coding and non-coding (HVS1) sequences for haplogroup R0, which contains the major haplogroups H and V. These new dates are likely to impact the present colonization model for Europe and confirm the late glacial resettlement scenario

MicroRNA and gene co-expression networks characterize biological and clinical behavior of rhabdomyosarcomas.

Rhabdomyosarcomas (RMS) in children and adolescents are heterogeneous sarcomas broadly defined by skeletal muscle features and the presence/absence of PAX3/7-FOXO1 fusion genes. MicroRNAs are small non-coding RNAs that regulate gene expression in a cell context specific manner. Sequencing analyses of microRNAs in 64 RMS revealed expression patterns separating skeletal muscle, fusion gene positive and negative RMS. Integration with parallel gene expression data assigned biological functions to 12 co-expression networks/modules that reassuringly included myogenic roles strongly correlated with microRNAs known in myogenesis and RMS development. Modules also correlated with clinical outcome and fusion status. Regulation of microRNAs by the fusion protein was demonstrated after PAX3-FOXO1 reduction, exemplified by miR-9-5p. MiR-9-5p levels correlated with poor outcome, even within fusion gene positive RMS, and were higher in metastatic versus non-metastatic disease. MiR-9-5p reduction inhibited RMS cell migration. Our findings reveal microRNAs in a regulatory framework of biological and clinical significance in RMS