Intermitten dynamics in externally driven ferroelastics and strain glasses

The interplay of elastic anisotropy and disorder dictates many of the properties of ferroic materials, specifically martensites. We use a phase-field model for ferroelastic athermal materials to study their response to an increasing external stress that couples to the strain order parameter. We show that these systems evolve through avalanches and study the avalanche-size distribution for ferroelastic systems (large anisotropy and/or small disorder) and for the strain glass (small anisotropy and/or large disorder) using various statistical analysis techniques, including the maximum likelihood method. The model predicts that in the former case the distribution is subcritical or power law (in agreement with experimental observations), whereas in the latter case it becomes supercritical. Our results are consistent with experiments on martensitic materials, and we predict specific avalanche behavior that can be tested and used as an alternative means to characterize strain glasses

The high correlation between counts and area fractions of lipofuscin granules, a biomarker of oxidative stress in muscular dystrophies

Images of cryostat unstained sections of two skeletal muscles, diaphragm and extensor digitorum longus (EDL), from wild-type normal and dystrophic mdx mice were captured with a fluorescence microscope, binarised and analysed by an automated procedure using ImageJ free software. The numbers, Feret diameters and areas of autofluorescent lipofuscin (LF)-like granules in the sections were determined from the binary images. The mean numbers of counted LF granules per mm(3) muscle tissue correlated highly (r ≥ 0.9) with the area fractions of the granules in sections of both normal and mdx muscles. The similar distribution patterns of granule sizes in sections of diaphragm and EDL muscles are consistent with the high correlations

A joint experimental and theoretical study on the electronic structure and photoluminescence properties of Al2(WO4)3 powders

In this paper, aluminum tungstate Al2(WO4)3 powders were synthesized using the co-precipitation method at room temperature and then submitted to heat treatment processes at different temperatures (100, 200, 400, 800, and 1000 °C) for 2 h. The structure and morphology of the powders were characterized by means of X-ray diffraction (XRD), Rietveld refinement data, and field emission scanning electron microscopy (FE-SEM) images. Their optical properties were examined with ultraviolet-visible (UV-vis) diffuse reflectance spectroscopy and photoluminescence (PL) measurements. XRD patterns and Rietveld refinement data showed that Al2(WO4)3 powders heat treated at 1000 °C for 2 h have a orthorhombic structure with a space group (Pnca) without the presence of deleterious phases. FE-SEM images revealed that these powders are formed by the aggregation of several nanoparticles leading to the growth of microparticles with irregular morphologies and an agglomerated nature. UV-vis spectra indicated that optical band gap energy increased from 3.16 to 3.48 eV) as the processing temperature rose, which was in turn associated with a reduction in intermediary energy levels. First-principle calculations were performed in order to understand the behavior of the PL properties using density functional theory at the B3LYP calculation level on periodic model systems and indicate the presence of stable electronic excited states (singlet). The analyses of the band structures and density of states at both ground and first excited electronic states provide insight into the main features, based on structural and electronic order-disorder effects in octahedral [AlO6] clusters and tetrahedral [WO4] clusters, as constituent building units of this material

Multiferroic and Related Hysteretic Behavior in Ferromagnetic Shape Memory Alloys

We combine a Ginzburg-Landau model for a ferroelastic transition with the theory of micromagnetism to study the magnetostructural behavior leading to multicaloric effects in ferromagnetic shape memory alloys. We analyze the ferroelastic transition under different conditions of temperature, stress and magnetic field and establish the corresponding phase diagram. On the one hand, our results show that the proper combination of both fields may be used to reduce the transition hysteresis and thus improve the reversibility of the related elastocaloric effects, superelasticity and stress-mediated magnetocaloric effects. On the other hand, the stress-free magnetic field-driven and thermally driven magnetostructural evolution provides physical insight into the low-temperature field-induced domain reorientation, from which we derive strategies to modify the operational temperature ranges and thus the corresponding (magnetic) shape-memory effect

Length of carotid stenosis predicts peri-procedural stroke or death and restenosis in patients randomized to endovascular treatment or endarterectomy.

BACKGROUND: The anatomy of carotid stenosis may influence the outcome of endovascular treatment or carotid endarterectomy. Whether anatomy favors one treatment over the other in terms of safety or efficacy has not been investigated in randomized trials. METHODS: In 414 patients with mostly symptomatic carotid stenosis randomized to endovascular treatment (angioplasty or stenting; n = 213) or carotid endarterectomy (n = 211) in the Carotid and Vertebral Artery Transluminal Angioplasty Study (CAVATAS), the degree and length of stenosis and plaque surface irregularity were assessed on baseline intraarterial angiography. Outcome measures were stroke or death occurring between randomization and 30 days after treatment, and ipsilateral stroke and restenosis ≥50% during follow-up. RESULTS: Carotid stenosis longer than 0.65 times the common carotid artery diameter was associated with increased risk of peri-procedural stroke or death after both endovascular treatment [odds ratio 2.79 (1.17-6.65), P = 0.02] and carotid endarterectomy [2.43 (1.03-5.73), P = 0.04], and with increased long-term risk of restenosis in endovascular treatment [hazard ratio 1.68 (1.12-2.53), P = 0.01]. The excess in restenosis after endovascular treatment compared with carotid endarterectomy was significantly greater in patients with long stenosis than with short stenosis at baseline (interaction P = 0.003). Results remained significant after multivariate adjustment. No associations were found for degree of stenosis and plaque surface. CONCLUSIONS: Increasing stenosis length is an independent risk factor for peri-procedural stroke or death in endovascular treatment and carotid endarterectomy, without favoring one treatment over the other. However, the excess restenosis rate after endovascular treatment compared with carotid endarterectomy increases with longer stenosis at baseline. Stenosis length merits further investigation in carotid revascularisation trials

Shrinking a large dataset to identify variables associated with increased risk of Plasmodium falciparum infection in Western Kenya

Large datasets are often not amenable to analysis using traditional single-step approaches. Here, our general objective was to apply imputation techniques, principal component analysis (PCA), elastic net and generalized linear models to a large dataset in a systematic approach to extract the most meaningful predictors for a health outcome. We extracted predictors for Plasmodium falciparum infection, from a large covariate dataset while facing limited numbers of observations, using data from the People, Animals, and their Zoonoses (PAZ) project to demonstrate these techniques: data collected from 415 homesteads in western Kenya, contained over 1500 variables that describe the health, environment, and social factors of the humans, livestock, and the homesteads in which they reside. The wide, sparse dataset was simplified to 42 predictors of P. falciparum malaria infection and wealth rankings were produced for all homesteads. The 42 predictors make biological sense and are supported by previous studies. This systematic data-mining approach we used would make many large datasets more manageable and informative for decision-making processes and health policy prioritization

Study of CP violation in Dalitz-plot analyses of B0 --> K+K-KS, B+ --> K+K-K+, and B+ --> KSKSK+

We perform amplitude analyses of the decays $B^0 \to K^+K^-K^0_S$, $B^+ \rightarrow K^+K^-K^+$, and $B^+ \to K^0_S K^0_S K^+$, and measure CP-violating parameters and partial branching fractions. The results are based on a data sample of approximately $470\times 10^6$ $B\bar{B}$ decays, collected with the BABAR detector at the PEP-II asymmetric-energy $B$ factory at the SLAC National Accelerator Laboratory. For $B^+ \to K^+K^-K^+$, we find a direct CP asymmetry in $B^+ \to \phi(1020)K^+$ of $A_{CP}= (12.8\pm 4.4 \pm 1.3)$, which differs from zero by $2.8 \sigma$. For $B^0 \to K^+K^-K^0_S$, we measure the CP-violating phase $\beta_{\rm eff} (\phi(1020)K^0_S) = (21\pm 6 \pm 2)^\circ$. For $B^+ \to K^0_S K^0_S K^+$, we measure an overall direct CP asymmetry of $A_{CP} = (4 ^{+4}_{-5} \pm 2)$. We also perform an angular-moment analysis of the three channels, and determine that the $f_X(1500)$ state can be described well by the sum of the resonances $f_0(1500)$, $f_2^{\prime}(1525)$, and $f_0(1710)$.Comment: 35 pages, 68 postscript figures. v3 - minor modifications to agree with published versio

Studying the Underlying Event in Drell-Yan and High Transverse Momentum Jet Production at the Tevatron

We study the underlying event in proton-antiproton collisions by examining the behavior of charged particles (transverse momentum pT > 0.5 GeV/c, pseudorapidity |\eta| < 1) produced in association with large transverse momentum jets (~2.2 fb-1) or with Drell-Yan lepton-pairs (~2.7 fb-1) in the Z-boson mass region (70 < M(pair) < 110 GeV/c2) as measured by CDF at 1.96 TeV center-of-mass energy. We use the direction of the lepton-pair (in Drell-Yan production) or the leading jet (in high-pT jet production) in each event to define three regions of \eta-\phi space; toward, away, and transverse, where \phi is the azimuthal scattering angle. For Drell-Yan production (excluding the leptons) both the toward and transverse regions are very sensitive to the underlying event. In high-pT jet production the transverse region is very sensitive to the underlying event and is separated into a MAX and MIN transverse region, which helps separate the hard component (initial and final-state radiation) from the beam-beam remnant and multiple parton interaction components of the scattering. The data are corrected to the particle level to remove detector effects and are then compared with several QCD Monte-Carlo models. The goal of this analysis is to provide data that can be used to test and improve the QCD Monte-Carlo models of the underlying event that are used to simulate hadron-hadron collisions.Comment: Submitted to Phys.Rev.

Measurement of the W+W−W^+W^- Production Cross Section and Search for Anomalous WWγWW\gamma and WWZWWZ Couplings in ppˉp \bar p Collisions at s=1.96\sqrt{s} = 1.96 TeV

This Letter describes the current most precise measurement of the $W$ boson pair production cross section and most sensitive test of anomalous $WW\gamma$ and $WWZ$ couplings in $p \bar p$ collisions at a center-of-mass energy of 1.96 TeV. The $WW$ candidates are reconstructed from decays containing two charged leptons and two neutrinos, where the charged leptons are either electrons or muons. Using data collected by the CDF II detector from 3.6 fb$^{-1}$ of integrated luminosity, a total of 654 candidate events are observed with an expected background contribution of $320 \pm 47$ events. The measured total cross section is $\sigma (p \bar p \to W^+ W^- + X) = 12.1 \pm 0.9 \textrm{(stat)} ^{+1.6}_{-1.4} \textrm{(syst)}$ pb, which is in good agreement with the standard model prediction. The same data sample is used to place constraints on anomalous $WW\gamma$ and $WWZ$ couplings.Comment: submitted to Phys. Rev. Let