A Nanoporous Silicon Nitride Membrane Using A Two-step Lift-off Pattern Transfer With Thermal Nanoimprint Lithography

Nanoimprint lithography is emerging as a viable contender for fabrication of large-scale arrays of 5500 nm features. A fabrication process for the realization of thin nanoporous membranes using thermal nanoimprint lithography is presented. Suspended silicon nitride membranes were fabricated by low-pressure chemical vapor deposition (LPCVD) in conjunction with a potassium hydroxide-based bulk micromachining process. Nanoscale features were imprinted into a commercially available thermoplastic polymer resist using a prefabricated silicon mold. The pattern was reversed and transferred to a thin aluminum oxide layer by means of a novel two-stage lift-off technique. The patterned aluminum oxide was used as an etch mask in a CHF 3/He-based reactive ion etch process to transfer the pattern to silicon nitride. Highly directional etch profiles with near vertical sidewalls and excellent Si 3N 4/Al 2O 3etch selectivity were observed. One micrometer thick porous membranes with varying dimensions of 250x250 νm 2to 450x450 νm 2and a pore diameter of 400 nm have been engineered and evaluated. Results indicate that the membranes have consistent nanopore dimensions and precisely defined porosity, which makes them ideal as gas exchange interfaces in blood oxygenation systems as well as other applications such as dialysis. © 2012 IOP Publishing Ltd

Micromachined Nanoporous Membranes For Blood Oxygenation Systems

Nanostructured membranes with precisely engineered nanopores were fabricated on a thin silicon nitride membrane, using a combination of bulk micromachining and focused-ion-beam drilling. These membranes are designed to preserve microscale blood channel dimensions, thereby permitting the red cell shape change that enhances gas exchange in the pulmonary capillary. The membranes were tested for their mechanical stability and the results were verified with finite element analysis. Initial studies have proven the membranes to be robust, and capable of withstanding pressures typically experienced in blood oxygenator channels. A novel MEMS-based blood oxygenation system employing the nanoporous membranes is also presented. The oxygenation system is designed to have controlled blood and gas volumes for efficient blood oxygenation. © 2008 IEEE

TESS Asteroseismology of α\alpha Mensae: Benchmark Ages for a G7 Dwarf and its M-dwarf Companion

Asteroseismology of bright stars has become increasingly important as a method to determine fundamental properties (in particular ages) of stars. The Kepler Space Telescope initiated a revolution by detecting oscillations in more than 500 main-sequence and subgiant stars. However, most Kepler stars are faint, and therefore have limited constraints from independent methods such as long-baseline interferometry. Here, we present the discovery of solar-like oscillations in $\alpha$ Men A, a naked-eye (V=5.1) G7 dwarf in TESS's Southern Continuous Viewing Zone. Using a combination of astrometry, spectroscopy, and asteroseismology, we precisely characterize the solar analog alpha Men A (Teff = 5569 +/- 62 K, R = 0.960 +/- 0.016 Rsun, M = 0.964 +/- 0.045 Msun). To characterize the fully convective M dwarf companion, we derive empirical relations to estimate mass, radius, and temperature given the absolute Gaia magnitude and metallicity, yielding M = 0.169 +/- 0.006, R = 0.19 +/- 0.01 and Teff = 3054 +/- 44 K. Our asteroseismic age of 6.2 +/- 1.4 (stat) +/- 0.6 (sys) Gyr for the primary places $\alpha$ Men B within a small population of M dwarfs with precisely measured ages. We combined multiple ground-based spectroscopy surveys to reveal an activity cycle of 13.1 +/- 1.1 years, a period similar to that observed in the Sun. We used different gyrochronology models with the asteroseismic age to estimate a rotation period of ~30 days for the primary. Alpha Men A is now the closest (d=10pc) solar analog with a precise asteroseismic age from space-based photometry, making it a prime target for next-generation direct imaging missions searching for true Earth analogs.Comment: Accepted to The Astrophysical Journal; 15 pages, 10 figure

Social Class

Discussion of class structure in fifth-century Athens, historical constitution of theater audiences, and the changes in the comic representation of class antagonism from Aristophanes to Menander

Development of On-Line High Performance Liquid Chromatography (HPLC)-Biochemical Detection Methods as Tools in the Identification of Bioactives

Biochemical detection (BCD) methods are commonly used to screen plant extracts for specific biological activities in batch assays. Traditionally, bioactives in the most active extracts were identified through time-consuming bio-assay guided fractionation until single active compounds could be isolated. Not only are isolation procedures often tedious, but they could also lead to artifact formation. On-line coupling of BCD assays to high performance liquid chromatography (HPLC) is gaining ground as a high resolution screening technique to overcome problems associated with pre-isolation by measuring the effects of compounds post-column directly after separation. To date, several on-line HPLC-BCD assays, applied to whole plant extracts and mixtures, have been published. In this review the focus will fall on enzyme-based, receptor-based and antioxidant assays

Bioinspired approaches for toughening of fibre reinforced polymer composites

In Nature, there are a large range of tough, strong, lightweight and multifunctional structures that can be an inspiration to better performingmaterials. Thiswork presents a review of structures found in Nature, frombiological ceramics and ceramics composites, biological polymers and polymers composites, biological cellular materials, biological elastomers to functional biological materials, and their main tougheningmechanisms, envisaging potential mimicking approaches that can be applied in advanced continuous fibre reinforced polymer (FRP) composite structures. For this, themost common engineering compositemanufacturing processes and current composite damage mitigation approaches are analysed. This aims at establishing the constraints of biomimetic approaches development as these bioinspired structures are to be manufactured by composite technologies. Combining both Nature approaches and engineering composites developments is a route for the design and manufacturing of high mechanical performance and multifunctional composite structures, therefore new bioinspired solutions are proposed.This research was funded by the project “IAMAT—Introduction of advanced materials technologies into new product development for the mobility industries”, with reference MITP-TB/PFM/0005/2013, under the MIT-Portugal program and in the scope of projects with references UIDB/05256/2020 and UIDP/05256/2020, exclusively financed by FCT - Fundação para a Ciência e Tecnologia

Exome-wide association study to identify rare variants influencing COVID-19 outcomes : Results from the Host Genetics Initiative

Publisher Copyright: Copyright: © 2022 Butler-Laporte et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.Host genetics is a key determinant of COVID-19 outcomes. Previously, the COVID-19 Host Genetics Initiative genome-wide association study used common variants to identify multiple loci associated with COVID-19 outcomes. However, variants with the largest impact on COVID-19 outcomes are expected to be rare in the population. Hence, studying rare variants may provide additional insights into disease susceptibility and pathogenesis, thereby informing therapeutics development. Here, we combined whole-exome and whole-genome sequencing from 21 cohorts across 12 countries and performed rare variant exome-wide burden analyses for COVID-19 outcomes. In an analysis of 5,085 severe disease cases and 571,737 controls, we observed that carrying a rare deleterious variant in the SARS-CoV-2 sensor toll-like receptor TLR7 (on chromosome X) was associated with a 5.3-fold increase in severe disease (95% CI: 2.75–10.05, p = 5.41x10-7). This association was consistent across sexes. These results further support TLR7 as a genetic determinant of severe disease and suggest that larger studies on rare variants influencing COVID-19 outcomes could provide additional insights.Peer reviewe