6 Batch Injection and Slipped Beam Tune Measurements in Fermilab's Main Injector

During Nova operations it is planned to run the Fermilab Recycler in a 12 batch slip stacking mode. In preparation for this, measurements of the tune during a six batch injection and then as the beam is slipped by changing the RF frequency, but without a 7th injection, have been carried out in the Main Injector. The coherent tune shifts due to the changing beam intensity were measured and compared well with the theoretically expected tune shift. The tune shifts due to changing RF frequency, required for slip stacking, also compare well with the linear theory, although some nonlinear affects are apparent at large frequency changes. These results give us confidence that the expected tunes shifts during 12 batch slip stacking Recycler operations can be accommodated.Comment: 3 pp. 3rd International Particle Accelerator Conference (IPAC 2012) 20-25 May 2012, New Orleans, Louisian

Feasibility Investigation for Online Elemental Monitoring of Iron and Steel Manufacturing Processes using Laser-Induced Breakdown Spectroscopy

The metallurgical industries are very important for social development. In order to improve the metallurgical techniques and quality of products, the real-time analysis and monitoring of iron and steel manufacturing processes are very significant. Laser-induced breakdown spectroscopy (LIBS) has been studied and applied for the contents measurement of iron and steel. In this paper, the remote open-path LIBS measurement was studied under different sample temperature, lens to target distance (LTD), sample angle conditions to clarify its online measurement features. The 3D profile measurement system of parallel laser beam fringes projection was also developed to measure the sample profile at different sample temperature. The measurement results demonstrated the robustness of remote open-path LIBS system and 3D profile measurement system. However, the correction is necessary to enhance the detection ability of LIBS online measurement. In order to improve the precision and accuracy of real-time elemental measurement, an innovative co-axial laser beam measurement system combining LIBS and 3D profile techniques is proposed to automatically adjust the focus unit and measure the sample components. The further study of this promising method will be developed for online application of iron and steel manufacturing processes

Detection Improvement of Unburned Carbon Content in Fly Ash Flow Using LIBS with a Two-Stage Cyclone Measurement System

Fly ash contents can be considered as a basis for optimal and stable boiler combustion control and fly ash quality control in power plant, especially the unburned carbon in fly ash. The real-time and quantitative measurement of contents in fly ash was studied using a constructed two-stage cyclone measurement system and detected using laser-induced breakdown spectroscopy(LIBS) technique. The surrounding gas effect, such as CO2 effect on unburned carbon content, was studied comprehensively in this paper. The CO2 effect was eliminated using this proposed combination method of two-stage cyclone measurement system and LIBS with 1ns pulse-width laser according to the efficient gas-particle separation and the controlled laser-induced plasma processes of particle flow. The quantitative analysis was improved using the plasma temperature correction method with the intensity ratio of the emission pair from magnesium as a plasma temperature indicator. The measurement of unburned carbon content in fly ash with temperature correction method presented the concordant results analyzed by chemical analysis method. It is demonstrated the feasibility and improved detection ability for the real-time measurement of fly ash contents in power plant

Unburned carbon measurement in fly ash using laser-induced breakdown spectroscopy with short nanosecond pulse width laser

The unburned carbon in fly ash is one of the important factors for the boiler combustion condition. Controlling the unburned carbon in fly ash is beneficial for fly ash recycle and to improve the combustion efficiency of the coal. Laser-induced breakdown spectroscopy (LIBS) technology has been applied to measure the fly ash contents due to its merits of non-contact, fast response, high sensitivity, and real-time measurement. In this study, experimental measurements have been adopted for fly ash flows with the surrounding gases of N2 and CO2, while the CO2 concentration varified to evaluate the CO2 effect on the unburned carbon signal from fly ash powder. Two kinds of pulse width lasers, 6ns and 1ns, were separately adopted to compare the influence of laser pulse width. Results showed that compared with 6ns pulse width laser, plasma temperature was lower and had less dependence on delay time when using 1ns pulse width laser, and spectra had more stable background. By using 1ns pulse width laser, the emission signal from surrounding CO2 also decreased because of the less surrounding gas breakdown. The solid powder breakdown signals also became more stable when using 1ns pulse width laser. So it is demonstrated that 1ns pulse width laser has the merits for fly ash flow measurement using LIBS

Study Design of a Phase II Clinical Trial to Assess the Efficacy and Safety of Eperisone in Japanese Type 2 Diabetes Patients with Risk and Non-risk Alleles of CDKAL1

Genetic variation in Cdk5 Regulatory Associated Protein 1-Like 1 (CDKAL1) is associated with the development of type 2 diabetes (T2D). Dysfunction of CDKAL1 impairs the translation of proinsulin, which leads to glucose intolerance. Eperisone, an antispasmodic agent, has been shown to ameliorate glucose intolerance in Cdkal1-deficient mice. We have launched a phase II clinical study to investigate the potential anti-diabetic effect of eperisone in T2D patients carrying risk or non-risk alleles of CDKAL1. The primary endpoint is the change of hemoglobin A1c (HbA1c) levels. We also examined whether the efficacy of eperisone in T2D patients is associated with CDKAL1 activity

Shrinking a large dataset to identify variables associated with increased risk of Plasmodium falciparum infection in Western Kenya

Large datasets are often not amenable to analysis using traditional single-step approaches. Here, our general objective was to apply imputation techniques, principal component analysis (PCA), elastic net and generalized linear models to a large dataset in a systematic approach to extract the most meaningful predictors for a health outcome. We extracted predictors for Plasmodium falciparum infection, from a large covariate dataset while facing limited numbers of observations, using data from the People, Animals, and their Zoonoses (PAZ) project to demonstrate these techniques: data collected from 415 homesteads in western Kenya, contained over 1500 variables that describe the health, environment, and social factors of the humans, livestock, and the homesteads in which they reside. The wide, sparse dataset was simplified to 42 predictors of P. falciparum malaria infection and wealth rankings were produced for all homesteads. The 42 predictors make biological sense and are supported by previous studies. This systematic data-mining approach we used would make many large datasets more manageable and informative for decision-making processes and health policy prioritization

Search for Standard Model Higgs Boson Production in Association with a W Boson using a Neural Network

Submitted to Phys. Rev. DWe present a search for standard model Higgs boson production in association with a W boson in proton-antiproton collisions at a center of mass energy of 1.96 TeV. The search employs data collected with the CDF II detector that correspond to an integrated luminosity of approximately 1.9 inverse fb. We select events consistent with a signature of a single charged lepton, missing transverse energy, and two jets. Jets corresponding to bottom quarks are identified with a secondary vertex tagging method, a jet probability tagging method, and a neural network filter. We use kinematic information in an artificial neural network to improve discrimination between signal and background compared to previous analyses. The observed number of events and the neural network output distributions are consistent with the standard model background expectations, and we set 95% confidence level upper limits on the production cross section times branching fraction ranging from 1.2 to 1.1 pb or 7.5 to 102 times the standard model expectation for Higgs boson masses from 110 to $150 GeV/c^2, respectively.We present a search for standard model Higgs boson production in association with a W boson in proton-antiproton collisions (pp̅ →W±H→ℓνbb̅ ) at a center of mass energy of 1.96 TeV. The search employs data collected with the CDF II detector that correspond to an integrated luminosity of approximately 1.9  fb-1. We select events consistent with a signature of a single charged lepton (e±/μ±), missing transverse energy, and two jets. Jets corresponding to bottom quarks are identified with a secondary vertex tagging method, a jet probability tagging method, and a neural network filter. We use kinematic information in an artificial neural network to improve discrimination between signal and background compared to previous analyses. The observed number of events and the neural network output distributions are consistent with the standard model background expectations, and we set 95% confidence level upper limits on the production cross section times branching fraction ranging from 1.2 to 1.1 pb or 7.5 to 102 times the standard model expectation for Higgs boson masses from 110 to 150  GeV/c2, respectively.Peer reviewe

Observation of exclusive charmonium production and gamma+gamma to mu+mu- in p+pbar collisions at sqrt{s} = 1.96 TeV

7 pages, 3 figures, 1 table. Version accepted for Phys.Rev.Lett. Phys.Rev.Lett. (to be published)We have observed the reactions p+pbar --> p+X+pbar, with X being a centrally produced J/psi, psi(2S) or chi_c0, and gamma+gamma --> mu+mu-, in proton- antiproton collisions at sqrt{s} = 1.96 TeV using the Run II Collider Detector at Fermilab. The event signature requires two oppositely charged muons, each with pseudorapidity |eta| mu+mu-. Events with a J/psi and an associated photon candidate are consistent with exclusive chi_c0 production through double pomeron exchange. The exclusive vector meson production is as expected for elastic photo- production, gamma+p --> J/psi(psi(2S)) + p, which is observed here for the first time in hadron-hadron collisions. The cross sections ds/dy(y=0) for p + pbar --> p + X + pbar with X = J/psi, psi(2S) orchi_c0 are 3.92+/-0.62 nb, 0.53+/-0.14 nb, and 75+/-14 nb respectively. The cross section for the continuum, with |eta(mu+/-)|In CDF we have observed the reactions p+p̅ →p+X+p̅ , with X being a centrally produced J/ψ, ψ(2S), or χc0, and γγ→μ+μ- in pp̅ collisions at √s=1.96  TeV. The event signature requires two oppositely charged central muons, and either no other particles or one additional photon detected. Exclusive vector meson production is as expected for elastic photoproduction, γ+p→J/ψ(ψ(2S))+p, observed here for the first time in hadron-hadron collisions. We also observe exclusive χc0→J/ψ+γ. The cross sections dσ/dy|y=0 for J/ψ, ψ(2S), and χc0 are 3.92±0.25(stat)±0.52(syst)  nb, 0.53±0.09(stat)±0.10(syst)  nb, and 76±10(stat)±10(syst)  nb, respectively, and the continuum is consistent with QED. We put an upper limit on the cross section for Odderon exchange in exclusive J/ψ production.Peer reviewe

Search for the Production of Narrow tb Resonances in 1.9 fb-1 of ppbar Collisions at sqrt(s) = 1.96 TeV

We present new limits on resonant tb production in proton-antiproton collisions at 1.96 TeV, using 1.9 fb^-1 of data recorded with the CDF II detector at the Fermilab Tevatron. We reconstruct a candidate mass in events with a lepton, neutrino candidate, and two or three jets, and search for anomalous tb production as modeled by W'->tb. We set a new limit on a right-handed W' with standard model-like coupling, excluding any mass below 800 GeV at 95% C.L. The cross-section for any narrow, resonant tb production between 750 and 950 GeV is found to be less than 0.28 pb at 95% C.L. We also present an exclusion of the W' coupling strength versus W' mass over the range 300 to 950 GeV.We present new limits on resonant tb̅ production in pp̅ collisions at √s=1.96  TeV, using 1.9  fb-1 of data recorded with the CDF II detector at the Fermilab Tevatron. We reconstruct a candidate tb̅ mass in events with a lepton, neutrino candidate, and two or three jets, and search for anomalous tb̅ production as modeled by W′→tb̅ . We set a new limit on a right-handed W′ with standard model-like coupling, excluding any mass below 800  GeV/c2 at 95% C.L. The cross section for any narrow, resonant tb̅ production between 750 and 950  GeV/c2 is found to be less than 0.28 pb at 95% C.L. We also present an exclusion of the W′ coupling strength versus W′ mass over the range 300–950  GeV/c2.Peer reviewe

Study of multi-muon events produced in p\bar{p} interactions at \sqrt{s}=1.96 TeV

68 pages, 46 figures, 11 tables. Submitted to Phys. Rev. D. Removed typos from the authors' listWe report the results of a study of multi-muon events produced at the Fermilab Tevatron collider and acquired with the CDF II detector using a dedicated dimuon trigger. The production cross section and kinematics of events in which both muon candidates are produced inside the beam pipe of radius 1.5 cm are successfully modeled by known processes which include heavy flavor production. In contrast, we are presently unable to fully account for the number and properties of the remaining events, in which at least one muon candidate is produced outside of the beam pipe, in terms of the same understanding of the CDF II detector, trigger, and event reconstruction.Peer reviewe