448 research outputs found
Recommended from our members
Control of Emission Characteristics of Perovskite Lasers through Optical Feedback
Recent progress on perovskite lasers has shown the large potential for such materials to become a basis for commercially available microlasers in the near feature. Herein, distributed feedback (DFB) lasers based on vacuumâprocessed CsPbBr 3 are investigated. The expansion of the DFB structure from 1D to 2D suppresses parasitic amplified spontaneous emission (ASE), resulting in the multipleâtimeâenhanced lasing output. Further, the photoluminescence and lasing behavior of 1D and 2D DFB structures are explored through the kâspace imaging analysis
Electrical Pumping of Perovskite Diodes: Toward Stimulated Emission.
Funder: Alexander von Humboldt Foundation; Id: http://dx.doi.org/10.13039/100005156Funder: Center for Advancing Electronics Dresden (cfaed)The success of metal halide perovskites in photovoltaic and light-emitting diodes (LEDs) motivates their application as a solid-state thin-film laser. Various perovskites have shown optically pumped stimulated emission of lasing and amplified spontaneous emission (ASE), yet the ultimate goal of electrically pumped stimulated emission has not been achieved. As an essential step toward this goal, here, a perovskite diode structure that simultaneously exhibits stable operation at high current density (â1 kA cm-2 ) and optically excited ASE (with a threshold of 180 ”J cm-2 ) is reported. This diode structure achieves an electroluminescence quantum efficiency of 0.8% at 850 A cm-2 , which is estimated to be â3% of the charge carrier population required to reach ASE in the same device. It is shown that the formation of a large angle waveguide mode and the reduction of parasitic absorption losses are two major design principles for diodes to obtain a positive gain for stimulated emission. In addition to its prospect as a perovskite laser, a new application of electrically pumped ASE is proposed as an ideal perovskite LED architecture allowing 100% external radiation efficiency
The ratio of proton's electric to magnetic form factors measured by polarization transfer
The ratio of the proton's elastic electromagnetic form factors was obtained
by measuring the transverse and longitudinal polarizations of recoiling protons
from the elastic scattering of polarized electrons with unpolarized protons.
The ratio of the electric to magnetic form factor is proportional to the ratio
of the transverse to longitudinal recoil polarizations. The ratio was measured
over a range of four-momentum transfer squared between 0.5 and 3.5 GeV-squared.
Simultaneous measurement of transverse and longitudinal polarizations in a
polarimeter provides good control of the systematic uncertainty. The results
for the ratio of the proton's electric to magnetic form factors show a
systematic decrease with increasing four momentum squared, indicating for the
first time a marked difference in the spatial distribution of charge and
magnetization currents in the proton.Comment: 5 pages, 2 figures, version of paper after corrections due to
referees comments and shortened by removing one figure for Physical Review
Letter
Observation of Exclusive Gamma Gamma Production in p pbar Collisions at sqrt{s}=1.96 TeV
We have observed exclusive \gamma\gamma production in proton-antiproton
collisions at \sqrt{s}=1.96 TeV, using data from 1.11 \pm 0.07 fb^{-1}
integrated luminosity taken by the Run II Collider Detector at Fermilab. We
selected events with two electromagnetic showers, each with transverse energy
E_T > 2.5 GeV and pseudorapidity |\eta| < 1.0, with no other particles detected
in -7.4 < \eta < +7.4. The two showers have similar E_T and azimuthal angle
separation \Delta\phi \sim \pi; 34 events have two charged particle tracks,
consistent with the QED process p \bar{p} to p + e^+e^- + \bar{p} by two-photon
exchange, while 43 events have no charged tracks. The number of these events
that are exclusive \pi^0\pi^0 is consistent with zero and is < 15 at 95% C.L.
The cross section for p\bar{p} to p+\gamma\gamma+\bar{p} with |\eta(\gamma)| <
1.0 and E_T(\gamma) > 2.5$ GeV is
2.48^{+0.40}_{-0.35}(stat)^{+0.40}_{-0.51}(syst) pb.Comment: 7 pages, 4 figure
Combined search for the standard model Higgs boson decaying to a bb pair using the full CDF data set
We combine the results of searches for the standard model Higgs boson based
on the full CDF Run II data set obtained from sqrt(s) = 1.96 TeV p-pbar
collisions at the Fermilab Tevatron corresponding to an integrated luminosity
of 9.45/fb. The searches are conducted for Higgs bosons that are produced in
association with a W or Z boson, have masses in the range 90-150 GeV/c^2, and
decay into bb pairs. An excess of data is present that is inconsistent with the
background prediction at the level of 2.5 standard deviations (the most
significant local excess is 2.7 standard deviations).Comment: To be published in Phys. Rev. Lett (v2 contains minor updates based
on comments from PRL
Shrinking a large dataset to identify variables associated with increased risk of Plasmodium falciparum infection in Western Kenya
Large datasets are often not amenable to analysis using traditional single-step approaches. Here, our general objective was to apply imputation techniques, principal component analysis (PCA), elastic net and generalized linear models to a large dataset in a systematic approach to extract the most meaningful predictors for a health outcome. We extracted predictors for Plasmodium falciparum infection, from a large covariate dataset while facing limited numbers of observations, using data from the People, Animals, and their Zoonoses (PAZ) project to demonstrate these techniques: data collected from 415 homesteads in western Kenya, contained over 1500 variables that describe the health, environment, and social factors of the humans, livestock, and the homesteads in which they reside. The wide, sparse dataset was simplified to 42 predictors of P. falciparum malaria infection and wealth rankings were produced for all homesteads. The 42 predictors make biological sense and are supported by previous studies. This systematic data-mining approach we used would make many large datasets more manageable and informative for decision-making processes and health policy prioritization
Evidence for t\bar{t}\gamma Production and Measurement of \sigma_t\bar{t}\gamma / \sigma_t\bar{t}
Using data corresponding to 6.0/fb of ppbar collisions at sqrt(s) = 1.96 TeV
collected by the CDF II detector, we present a cross section measurement of
top-quark pair production with an additional radiated photon. The events are
selected by looking for a lepton, a photon, significant transverse momentum
imbalance, large total transverse energy, and three or more jets, with at least
one identified as containing a b quark. The ttbar+photon sample requires the
photon to have 10 GeV or more of transverse energy, and to be in the central
region. Using an event selection optimized for the ttbar+photon candidate
sample we measure the production cross section of, and the ratio of cross
sections of the two samples. Control samples in the dilepton+photon and
lepton+photon+\met, channels are constructed to aid in decay product
identification and background measurements. We observe 30 ttbar+photon
candidate events compared to the standard model expectation of 26.9 +/- 3.4
events. We measure the ttbar+photon cross section to be 0.18+0.08 pb, and the
ratio of the cross section of ttbar+photon to ttbar to be 0.024 +/- 0.009.
Assuming no ttbar+photon production, we observe a probability of 0.0015 of the
background events alone producing 30 events or more, corresponding to 3.0
standard deviations.Comment: 9 pages, 3 figure
Precision Top-Quark Mass Measurements at CDF
We present a precision measurement of the top-quark mass using the full
sample of Tevatron TeV proton-antiproton collisions collected
by the CDF II detector, corresponding to an integrated luminosity of 8.7
. Using a sample of candidate events decaying into the
lepton+jets channel, we obtain distributions of the top-quark masses and the
invariant mass of two jets from the boson decays from data. We then compare
these distributions to templates derived from signal and background samples to
extract the top-quark mass and the energy scale of the calorimeter jets with
{\it in situ} calibration. The likelihood fit of the templates from signal and
background events to the data yields the single most-precise measurement of the
top-quark mass, \mtop = 172.85 \pm\pmComment: submitted to Phys. Rev. Let
A search for resonant production of pairs in $4.8\ \rm{fb}^{-1}p\bar{p}\sqrt{s}=1.96\ \rm{TeV}$
We search for resonant production of tt pairs in 4.8 fb^{-1} integrated
luminosity of ppbar collision data at sqrt{s}=1.96 TeV in the lepton+jets decay
channel, where one top quark decays leptonically and the other hadronically. A
matrix element reconstruction technique is used; for each event a probability
density function (pdf) of the ttbar candidate invariant mass is sampled. These
pdfs are used to construct a likelihood function, whereby the cross section for
resonant ttbar production is estimated, given a hypothetical resonance mass and
width. The data indicate no evidence of resonant production of ttbar pairs. A
benchmark model of leptophobic Z \rightarrow ttbar is excluded with m_{Z'} <
900 GeV at 95% confidence level.Comment: accepted for publication in Physical Review D Sep 21, 201
- âŠ