29 research outputs found

    Search for pair-produced resonances decaying to quark pairs in proton-proton collisions at root s=13 TeV

    Get PDF
    A general search for the pair production of resonances, each decaying to two quarks, is reported. The search is conducted separately for heavier resonances (masses above 400 GeV), where each of the four final-state quarks generates a hadronic jet resulting in a four-jet signature, and for lighter resonances (masses between 80 and 400 GeV), where the pair of quarks from each resonance is collimated and reconstructed as a single jet resulting in a two-jet signature. In addition, a b-tagged selection is applied to target resonances with a bottom quark in the final state. The analysis uses data collected with the CMS detector at the CERN LHC, corresponding to an integrated luminosity of 35.9 fb(-1), from proton-proton collisions at a center-of-mass energy of 13 TeV. The mass spectra are analyzed for the presence of new resonances, and are found to be consistent with standard model expectations. The results are interpreted in the framework of R-parity-violating supersymmetry assuming the pair production of scalar top quarks decaying via the hadronic coupling lambda ''(312) or lambda ''(323) and upper limits on the cross section as a function of the top squark mass are set. These results probe a wider range of masses than previously explored at the LHC, and extend the top squark mass limits in the (t) over tilde -> qq' scenario.Peer reviewe

    Erratum: Search for Resonant and Nonresonant Higgs Boson Pair Production in the bb[over ¯]τ^{+}τ^{-} Decay Channel in pp Collisions at sqrt[s]=13  TeV with the ATLAS Detector [Phys. Rev. Lett. 121, 191801 (2018)]

    Get PDF

    Guidelines for the use and interpretation of assays for monitoring autophagy (3rd edition)

    Get PDF
    In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. For example, a key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process versus those that measure fl ux through the autophagy pathway (i.e., the complete process including the amount and rate of cargo sequestered and degraded). In particular, a block in macroautophagy that results in autophagosome accumulation must be differentiated from stimuli that increase autophagic activity, defi ned as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (inmost higher eukaryotes and some protists such as Dictyostelium ) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the fi eld understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. It is worth emphasizing here that lysosomal digestion is a stage of autophagy and evaluating its competence is a crucial part of the evaluation of autophagic flux, or complete autophagy. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. Along these lines, because of the potential for pleiotropic effects due to blocking autophagy through genetic manipulation it is imperative to delete or knock down more than one autophagy-related gene. In addition, some individual Atg proteins, or groups of proteins, are involved in other cellular pathways so not all Atg proteins can be used as a specific marker for an autophagic process. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field

    Operation and performance of the ATLAS Tile Calorimeter in Run 1

    Get PDF
    The Tile Calorimeter is the hadron calorimeter covering the central region of the ATLAS experiment at the Large Hadron Collider. Approximately 10,000 photomultipliers collect light from scintillating tiles acting as the active material sandwiched between slabs of steel absorber. This paper gives an overview of the calorimeter’s performance during the years 2008–2012 using cosmic-ray muon events and proton–proton collision data at centre-of-mass energies of 7 and 8TeV with a total integrated luminosity of nearly 30 fb−1. The signal reconstruction methods, calibration systems as well as the detector operation status are presented. The energy and time calibration methods performed excellently, resulting in good stability of the calorimeter response under varying conditions during the LHC Run 1. Finally, the Tile Calorimeter response to isolated muons and hadrons as well as to jets from proton–proton collisions is presented. The results demonstrate excellent performance in accord with specifications mentioned in the Technical Design Report

    Observation of the Λb0→J/ψΛφ decay in proton-proton collisions at s=13TeV

    No full text
    The observation of the Λb0→J/ψΛφ decay is reported using proton-proton collision data collected at s=13TeV by the CMS experiment at the LHC in 2018, corresponding to an integrated luminosity of 60fb−1. The ratio of the branching fractions B(Λb0→J/ψΛφ)/B(Λb0→ψ(2S)Λ) is measured to be (8.26±0.90(stat)±0.68(syst)±0.11(B))×10−2, where the first uncertainty is statistical, the second is systematic, and the last uncertainty reflects the uncertainties in the world-average branching fractions of φ and ψ(2S) decays to the reconstructed final states

    Measurement of the cross section for tt \mathrm{t}\overline{\mathrm{t}} production with additional jets and b jets in pp collisions at s \sqrt{s} = 13 TeV

    No full text
    Measurements of the cross section for the production of top quark pairs in association with a pair of jets from bottom quarks (σttbb) \left({\sigma}_{\mathrm{t}\overline{\mathrm{t}}\mathrm{b}\overline{\mathrm{b}}}\right) and in association with a pair of jets from quarks of any flavor or gluons (σttjj) \left({\sigma}_{\mathrm{t}\overline{\mathrm{t}}\mathrm{jj}}\right) and their ratio are presented. The data were collected in proton-proton collisions at a center-of-mass energy of 13 TeV by the CMS experiment at the LHC in 2016 and correspond to an integrated luminosity of 35.9 fb−1. The measurements are performed in a fiducial phase space and extrapolated to the full phase space, separately for the dilepton and lepton+jets channels, where lepton corresponds to either an electron or a muon. The results of the measurements in the fiducial phase space for the dilepton and lepton+jets channels, respectively, are σttjj {\sigma}_{\mathrm{t}\overline{\mathrm{t}}\mathrm{jj}} = 2.36±0.02 (stat)±0.20 (syst) pb and 31.0±0.2 (stat)±2.9 (syst) pb, and for the cross section ratio 0.017 ± 0.001 (stat) ± 0.001 (syst) and 0.020 ± 0.001 (stat) ± 0.001 (syst). The values of σttbb {\sigma}_{\mathrm{t}\overline{\mathrm{t}}\mathrm{b}\overline{\mathrm{b}}} are determined from the product of the σttjj {\sigma}_{\mathrm{t}\overline{\mathrm{t}}\mathrm{jj}} and the cross section ratio, obtaining, respectively, 0.040±0.002 (stat)±0.005 (syst) pb and 0.62±0.03 (stat)±0.07 (syst) pb. These measurements are the most precise to date and are consistent, within the uncertainties, with the standard model expectations obtained using a matrix element calculation at next-to-leading order in quantum chromodynamics matched to a parton shower

    A search for the standard model Higgs boson decaying to charm quarks

    No full text
    A direct search for the standard model Higgs boson, H, produced in association with a vector boson, V (W or Z), and decaying to a charm quark pair is presented. The search uses a data set of proton-proton collisions corresponding to an integrated luminosity of 35.9 fb−1, collected by the CMS experiment at the LHC in 2016, at a centre-of-mass energy of 13 TeV. The search is carried out in mutually exclusive channels targeting specific decays of the vector bosons: W → lν, Z → ll, and Z → νν, where l is an electron or a muon. To fully exploit the topology of the H boson decay, two strategies are followed. In the first one, targeting lower vector boson transverse momentum, the H boson candidate is reconstructed via two resolved jets arising from the two charm quarks from the H boson decay. A second strategy identifies the case where the two charm quark jets from the H boson decay merge to form a single jet, which generally only occurs when the vector boson has higher transverse momentum. Both strategies make use of novel methods for charm jet identification, while jet substructure techniques are also exploited to suppress the background in the merged-jet topology. The two analyses are combined to yield a 95% confidence level observed (expected) upper limit on the cross section σ(VH)B(Hcc) \sigma \left(\mathrm{VH}\right)\mathrm{\mathcal{B}}\left(\mathrm{H}\to \mathrm{c}\overline{\mathrm{c}}\right) of 4.5 (2.40.7+1.0) \left({2.4}_{-0.7}^{+1.0}\right) pb, corresponding to 70 (37) times the standard model prediction

    Observation of nuclear modifications in W± boson production in pPb collisions at sNN=8.16TeV

    No full text
    The production of W± bosons is studied in proton-lead (pPb) collisions at a nucleon-nucleon centre-of-mass energy of sNN=8.16TeV. Measurements are performed in the W±→μ±νμ channel using a data sample corresponding to an integrated luminosity of 173.4±6.1nb−1, collected by the CMS Collaboration at the LHC. The number of positively and negatively charged W bosons is determined separately in the muon pseudorapidity region in the laboratory frame |ηlabμ|25GeV/c. The W± boson differential cross sections, muon charge asymmetry, and the ratios of W± boson yields for the proton-going over the Pb-going beam directions are reported as a function of the muon pseudorapidity in the nucleon-nucleon centre-of-mass frame. The measurements are compared to the predictions from theoretical calculations based on parton distribution functions (PDFs) at next-to-leading-order. The results favour PDF calculations that include nuclear modifications and provide constraints on the nuclear PDF global fits

    Measurement of ttˉ\hbox {t}{\bar{\hbox {t}}} normalised multi-differential cross sections in pp{\text {p}}{\text {p}} collisions at s=13TeV\sqrt{s}=13\,{\text {TeV}} , and simultaneous determination of the strong coupling strength, top quark pole mass, and parton distribution functions

    No full text
    Normalised multi-differential cross sections for top quark pair (ttˉ\hbox {t}{\bar{\hbox {t}}}) production are measured in proton-proton collisions at a centre-of-mass energy of 13TeV\,{\text {TeV}} using events containing two oppositely charged leptons. The analysed data were recorded with the CMS detector in 2016 and correspond to an integrated luminosity of 35.9fb135.9{\,{\text {fb}}^{-1}} . The double-differential ttˉ\hbox {t}{\bar{\hbox {t}}} cross section is measured as a function of the kinematic properties of the top quark and of the ttˉ\hbox {t}{\bar{\hbox {t}}} system at parton level in the full phase space. A triple-differential measurement is performed as a function of the invariant mass and rapidity of the ttˉ\hbox {t}{\bar{\hbox {t}}} system and the multiplicity of additional jets at particle level. The data are compared to predictions of Monte Carlo event generators that complement next-to-leading-order (NLO) quantum chromodynamics (QCD) calculations with parton showers. Together with a fixed-order NLO QCD calculation, the triple-differential measurement is used to extract values of the strong coupling strength αS\alpha _{S} and the top quark pole mass (mtpolem_{{\text {t}}}^{{\text {pole}}}) using several sets of parton distribution functions (PDFs). The measurement of mtpolem_{{\text {t}}}^{{\text {pole}}} exploits the sensitivity of the ttˉ\hbox {t}{\bar{\hbox {t}}} invariant mass distribution to mtpolem_{{\text {t}}}^{{\text {pole}}} near the production threshold. Furthermore, a simultaneous fit of the PDFs, αS\alpha _{S}, and mtpolem_{{\text {t}}}^{{\text {pole}}} is performed at NLO, demonstrating that the new data have significant impact on the gluon PDF, and at the same time allow an accurate determination of αS\alpha _{S} and mtpolem_{{\text {t}}}^{{\text {pole}}}. The values αS(mZ)=0.11350.0017+0.0021\alpha _{S}(m_{{\text {Z}}}) = 0.1135{}^{+0.0021}_{-0.0017} and mtpole=170.5±0.8GeVm_{{\text {t}}}^{{\text {pole}}} = 170.5 \pm 0.8 \,{\text {GeV}} are extracted, which account for experimental and theoretical uncertainties, the latter being estimated from NLO scale variations. Possible effects from Coulomb and soft-gluon resummation near the ttˉ\hbox {t}{\bar{\hbox {t}}} production threshold are neglected in these parameter extractions. A rough estimate of these effects indicates an expected correction of mtpolem_{{\text {t}}}^{{\text {pole}}} of the order of +1GeV+1 \,{\text {GeV}} , which can be regarded as additional theoretical uncertainty in the current mtpolem_{{\text {t}}}^{{\text {pole}}} extraction

    Search for an excited lepton that decays via a contact interaction to a lepton and two jets in proton-proton collisions at s \sqrt{s} = 13 TeV

    No full text
    Results are presented from a search for events containing an excited lepton (electron or muon) produced in association with an ordinary lepton of the same flavor and decaying to a lepton and two hadronic jets. Both the production and the decay of the excited leptons are assumed to occur via a contact interaction with a characteristic energy scale Λ. The branching fraction for the decay mode under study increases with the mass of the excited lepton and is the most sensitive channel for very heavy excited leptons. The analysis uses a sample of proton-proton collisions collected by the CMS experiment at the LHC at s \sqrt{s} = 13 TeV, corresponding to an integrated luminosity of 77.4 fb−1. The four-body invariant mass of the two lepton plus two jet system is used as the primary discriminating variable. No significant excess of events beyond the expectation for standard model processes is observed. Assuming that Λ is equal to the mass of the excited leptons, excited electrons and muons with masses below 5.6 and 5.7 TeV, respectively, are excluded at 95% confidence level. These are the best limits to date
    corecore