Shallow water marine sediment bacterial community shifts along a natural CO2 gradient in the Mediterranean Sea off Vulcano, Italy.

The effects of increasing atmospheric CO(2) on ocean ecosystems are a major environmental concern, as rapid shoaling of the carbonate saturation horizon is exposing vast areas of marine sediments to corrosive waters worldwide. Natural CO(2) gradients off Vulcano, Italy, have revealed profound ecosystem changes along rocky shore habitats as carbonate saturation levels decrease, but no investigations have yet been made of the sedimentary habitat. Here, we sampled the upper 2 cm of volcanic sand in three zones, ambient (median pCO(2) 419 μatm, minimum Ω(arag) 3.77), moderately CO(2)-enriched (median pCO(2) 592 μatm, minimum Ω(arag) 2.96), and highly CO(2)-enriched (median pCO(2) 1611 μatm, minimum Ω(arag) 0.35). We tested the hypothesis that increasing levels of seawater pCO(2) would cause significant shifts in sediment bacterial community composition, as shown recently in epilithic biofilms at the study site. In this study, 454 pyrosequencing of the V1 to V3 region of the 16S rRNA gene revealed a shift in community composition with increasing pCO(2). The relative abundances of most of the dominant genera were unaffected by the pCO(2) gradient, although there were significant differences for some 5 % of the genera present (viz. Georgenia, Lutibacter, Photobacterium, Acinetobacter, and Paenibacillus), and Shannon Diversity was greatest in sediments subject to long-term acidification (>100 years). Overall, this supports the view that globally increased ocean pCO(2) will be associated with changes in sediment bacterial community composition but that most of these organisms are resilient. However, further work is required to assess whether these results apply to other types of coastal sediments and whether the changes in relative abundance of bacterial taxa that we observed can significantly alter the biogeochemical functions of marine sediments

The Reputational Consequences of Failed Replications and Wrongness Admission among Scientists

Scientists are dedicating more attention to replication efforts. While the scientific utility of replications is unquestionable, the impact of failed replication efforts and the discussions surrounding them deserve more attention. Specifically, the debates about failed replications on social media have led to worry, in some scientists, regarding reputation. In order to gain data-informed insights into these issues, we collected data from 281 published scientists. We assessed whether scientists overestimate the negative reputational effects of a failed replication in a scenario-based study. Second, we assessed the reputational consequences of admitting wrongness (versus not) as an original scientist of an effect that has failed to replicate. Our data suggests that scientists overestimate the negative reputational impact of a hypothetical failed replication effort. We also show that admitting wrongness about a non-replicated finding is less harmful to one’s reputation than not admitting. Finally, we discovered a hint of evidence that feelings about the replication movement can be affected by whether replication efforts are aimed one’s own work versus the work of another. Given these findings, we then present potential ways forward in these discussions

User Experiences of Development of Dependence on the Synthetic Cannabinoids, 5f-AKB48 and 5F-PB-22, and Subsequent Withdrawal Syndromes

Emergence of synthetic cannabinoids (SCBs) in herbal smoking mixtures is a public health concern. New SCB’s such as 5f-AKB48 and 5F-PB-22 have been detected in French seizures and in sudden death post mortems in the US. The aim was to describe development of dependence on herbal smoking mixtures containing the SCB’s, 5f-AKB48 and 5F-PB-22 and subsequent withdrawal syndromes. Dependent users of herbal smoking mixtures known to contain the SCB’s 5f-AKB48 and 5F-PB-22 with an average Severity of Dependence Score (SDS) of 13 were interviewed using a structured guide (three males/three females). Narratives were analysed using the Empirical Phenomenological Psychological (EPP) five step method. Six themes with 68 categories emerged from the analysis. Themes are illustrated as 1) Networks and Product Availability; 2) Drivers and Motives for Use; 3) Effect and Pathways toward Dependence; 4) Poly Substance Use and Comparisons to Natural Cannabis; 5) Dependence and Withdrawal and 6) Self-detoxification Attempts. Two higher levels of abstraction above these theme-levels emerged from the data, with sole use of herbal smoking mixtures containing 5f-AKB48 and 5F-PB-22 centering on the interplay between intense cravings, compulsive all-consuming seeking, use and re-dose behaviours, and fear of the psychiatric and self-harms caused when in withdrawal. This is the first study describing dependence and withdrawal experiences in users dependent on 5f-AKB48 and 5F-PB-22. Given the potential for adverse psychiatric and physical consequences of dependent use, further development of specific clinical responses and clinical research around toxicity and withdrawal severity are warranted

Sensitivity to heat in MS patients: a factor strongly influencing symptomology - an explorative survey

<p>Abstract</p> <p>Background</p> <p>Many individuals diagnosed with Multiple Sclerosis (MS) are sensitive to increased body temperature, which has been recognized as correlating with the symptom of fatigue. The need to explore this association has been highlighted. The aim of this study was to investigate the occurrence of heat sensitivity and its relations to disease course, disability, common MS-related symptoms and ongoing immunosuppressive treatments among individuals 65 years of age or younger diagnosed with MS.</p> <p>Methods</p> <p>A cross-sectional designed survey was undertaken. A questionnaire was sent to MS-patients with an Expanded Disability Status Score (EDSS) in the interval of 0-6.5 and who were between 20 and 65 years of age, living in an eastern region of Sweden (n = 334). Besides occurrence of heat sensitivity (Yes/No) and corresponding questions, the Fatigue Severity Scale (FSS), the MS-related symptom checklist and the Perceived Deficit Questionnaire (PDQ) were included. Data were analysed in relation to data level using Chi-square, Mann Whitney U-test, and Student's t-test. Pearson's and Spearman's correlations were calculated. In the logistic regression analyses (enter) dichotomized MS-symptoms were used as dependent variables, and EDSS, disease-course, time since onset, heat-sensitivity, age and sex (female/male) were independent variables. In the linear regression analyses, enter, mean FSS and summarized PDQ were entered as dependent variables and EDSS, disease-course, time since onset, heat sensitivity, age and sex (female/male) were independent variables.</p> <p>Results</p> <p>Of the responding patients (n = 256), 58% reported heat sensitivity. The regression analyses revealed heat sensitivity as a significant factor relating not only to fatigue (p < 0.001), but also to several other common MS symptoms such as pain (p < 0.001), concentration difficulties (p < 0.001), and urination urgency (p = 0.009).</p> <p>Conclusions</p> <p>Heat sensitivity in MS patients is a key symptom that is highly correlated with disabling symptoms such as fatigue, pain, concentration difficulty and urination urgency.</p

Angular and Current-Target Correlations in Deep Inelastic Scattering at HERA

Correlations between charged particles in deep inelastic ep scattering have been studied in the Breit frame with the ZEUS detector at HERA using an integrated luminosity of 6.4 pb-1. Short-range correlations are analysed in terms of the angular separation between current-region particles within a cone centred around the virtual photon axis. Long-range correlations between the current and target regions have also been measured. The data support predictions for the scaling behaviour of the angular correlations at high Q2 and for anti-correlations between the current and target regions over a large range in Q2 and in the Bjorken scaling variable x. Analytic QCD calculations and Monte Carlo models correctly describe the trends of the data at high Q2, but show quantitative discrepancies. The data show differences between the correlations in deep inelastic scattering and e+e- annihilation.Comment: 26 pages including 10 figures (submitted to Eur. J. Phys. C

Plastisol Foaming Process. Decomposition of the Foaming Agent, Polymer Behavior in the Corresponding Temperature Range and Resulting Foam Properties

The decomposition of azodicarbonamide, used as foaming agent in PVC - plasticizer (1/1) plastisols was studied by DSC. Nineteen different plasticizers, all belonging to the ester family, two being polymeric (polyadipates), were compared. The temperature of maximum decomposition rate (in anisothermal regime at 5 K min-1 scanning rate), ranges between 434 and 452 K. The heat of decomposition ranges between 8.7 and 12.5 J g -1. Some trends of variation of these parameters appear significant and are discussed in terms of solvent (matrix) and viscosity effects on the decomposition reactions. The shear modulus at 1 Hz frequency was determined at the temperature of maximum rate of foaming agent decomposition, and differs significantly from a sample to another. The foam density was determined at ambient temperature and the volume fraction of bubbles was used as criterion to judge the efficiency of the foaming process. The results reveal the existence of an optimal shear modulus of the order of 2 kPa that corresponds roughly to plasticizer molar masses of the order of 450 ± 50 g mol-1. Heavier plasticizers, especially polymeric ones are too difficult to deform. Lighter plasticizers such as diethyl phthalate (DEP) deform too easily and presumably facilitate bubble collapse

Measurement of the Bottom-Strange Meson Mixing Phase in the Full CDF Data Set

We report a measurement of the bottom-strange meson mixing phase \beta_s using the time evolution of B0_s -> J/\psi (->\mu+\mu-) \phi (-> K+ K-) decays in which the quark-flavor content of the bottom-strange meson is identified at production. This measurement uses the full data set of proton-antiproton collisions at sqrt(s)= 1.96 TeV collected by the Collider Detector experiment at the Fermilab Tevatron, corresponding to 9.6 fb-1 of integrated luminosity. We report confidence regions in the two-dimensional space of \beta_s and the B0_s decay-width difference \Delta\Gamma_s, and measure \beta_s in [-\pi/2, -1.51] U [-0.06, 0.30] U [1.26, \pi/2] at the 68% confidence level, in agreement with the standard model expectation. Assuming the standard model value of \beta_s, we also determine \Delta\Gamma_s = 0.068 +- 0.026 (stat) +- 0.009 (syst) ps-1 and the mean B0_s lifetime, \tau_s = 1.528 +- 0.019 (stat) +- 0.009 (syst) ps, which are consistent and competitive with determinations by other experiments.Comment: 8 pages, 2 figures, Phys. Rev. Lett 109, 171802 (2012

Jet energy measurement with the ATLAS detector in proton-proton collisions at root s=7 TeV

The jet energy scale and its systematic uncertainty are determined for jets measured with the ATLAS detector at the LHC in proton-proton collision data at a centre-of-mass energy of √s = 7TeV corresponding to an integrated luminosity of 38 pb-1. Jets are reconstructed with the anti-kt algorithm with distance parameters R=0. 4 or R=0. 6. Jet energy and angle corrections are determined from Monte Carlo simulations to calibrate jets with transverse momenta pT≥20 GeV and pseudorapidities {pipe}η{pipe}<4. 5. The jet energy systematic uncertainty is estimated using the single isolated hadron response measured in situ and in test-beams, exploiting the transverse momentum balance between central and forward jets in events with dijet topologies and studying systematic variations in Monte Carlo simulations. The jet energy uncertainty is less than 2. 5 % in the central calorimeter region ({pipe}η{pipe}<0. 8) for jets with 60≤pT<800 GeV, and is maximally 14 % for pT<30 GeV in the most forward region 3. 2≤{pipe}η{pipe}<4. 5. The jet energy is validated for jet transverse momenta up to 1 TeV to the level of a few percent using several in situ techniques by comparing a well-known reference such as the recoiling photon pT, the sum of the transverse momenta of tracks associated to the jet, or a system of low-pT jets recoiling against a high-pT jet. More sophisticated jet calibration schemes are presented based on calorimeter cell energy density weighting or hadronic properties of jets, aiming for an improved jet energy resolution and a reduced flavour dependence of the jet response. The systematic uncertainty of the jet energy determined from a combination of in situ techniques is consistent with the one derived from single hadron response measurements over a wide kinematic range. The nominal corrections and uncertainties are derived for isolated jets in an inclusive sample of high-pT jets. Special cases such as event topologies with close-by jets, or selections of samples with an enhanced content of jets originating from light quarks, heavy quarks or gluons are also discussed and the corresponding uncertainties are determined. © 2013 CERN for the benefit of the ATLAS collaboration