The Atacama Cosmology Telescope: Extragalactic Sources at 148 GHz in the 2008 Survey

We report on extragalactic sources detected in a 455 square-degree map of the southern sky made with data at a frequency of 148 GHz from the Atacama Cosmology Telescope 2008 observing season. We provide a catalog of 157 sources with flux densities spanning two orders of magnitude: from 15 to 1500 mJy. Comparison to other catalogs shows that 98% of the ACT detections correspond to sources detected at lower radio frequencies. Three of the sources appear to be associated with the brightest cluster galaxies of low redshift X-ray selected galaxy clusters. Estimates of the radio to mm-wave spectral indices and differential counts of the sources further bolster the hypothesis that they are nearly all radio sources, and that their emission is not dominated by re-emission from warm dust. In a bright (>50 mJy) 148 GHz-selected sample with complete cross-identifications from the Australia Telescope 20 GHz survey, we observe an average steepening of the spectra between 5, 20, and 148 GHz with median spectral indices of $\alpha_{\rm 5-20} = -0.07 \pm 0.06$, $\alpha_{\rm 20-148} = -0.39 \pm0.04$, and $\alpha_{\rm 5-148} = -0.20 \pm 0.03$. When the measured spectral indices are taken into account, the 148 GHz differential source counts are consistent with previous measurements at 30 GHz in the context of a source count model dominated by radio sources. Extrapolating with an appropriately rescaled model for the radio source counts, the Poisson contribution to the spatial power spectrum from synchrotron-dominated sources with flux density less than 20 mJy is C^{\rm Sync} = (2.8 \pm 0.3) \times 10^{-6} \micro\kelvin^2.Comment: Accepted to Ap

The Atacama Cosmology Telescope: A Measurement of the Cosmic Microwave Background Power Spectrum at 148 and 218 GHz from the 2008 Southern Survey

We present measurements of the cosmic microwave background (CMB) power spectrum made by the Atacama Cosmology Telescope at 148 GHz and 218 GHz, as well as the cross-frequency spectrum between the two channels. Our results clearly show the second through the seventh acoustic peaks in the CMB power spectrum. The measurements of these higher-order peaks provide an additional test of the {\Lambda}CDM cosmological model. At l > 3000, we detect power in excess of the primary anisotropy spectrum of the CMB. At lower multipoles 500 < l < 3000, we find evidence for gravitational lensing of the CMB in the power spectrum at the 2.8{\sigma} level. We also detect a low level of Galactic dust in our maps, which demonstrates that we can recover known faint, diffuse signals.Comment: 19 pages, 13 figures. Submitted to ApJ. This paper is a companion to Hajian et al. (2010) and Dunkley et al. (2010

The Atacama Cosmology Telescope: Data Characterization and Map Making

We present a description of the data reduction and mapmaking pipeline used for the 2008 observing season of the Atacama Cosmology Telescope (ACT). The data presented here at 148 GHz represent 12% of the 90 TB collected by ACT from 2007 to 2010. In 2008 we observed for 136 days, producing a total of 1423 hours of data (11 TB for the 148 GHz band only), with a daily average of 10.5 hours of observation. From these, 1085 hours were devoted to a 850 deg^2 stripe (11.2 hours by 9.1 deg) centered on a declination of -52.7 deg, while 175 hours were devoted to a 280 deg^2 stripe (4.5 hours by 4.8 deg) centered at the celestial equator. We discuss sources of statistical and systematic noise, calibration, telescope pointing, and data selection. Out of 1260 survey hours and 1024 detectors per array, 816 hours and 593 effective detectors remain after data selection for this frequency band, yielding a 38% survey efficiency. The total sensitivity in 2008, determined from the noise level between 5 Hz and 20 Hz in the time-ordered data stream (TOD), is 32 micro-Kelvin sqrt{s} in CMB units. Atmospheric brightness fluctuations constitute the main contaminant in the data and dominate the detector noise covariance at low frequencies in the TOD. The maps were made by solving the least-squares problem using the Preconditioned Conjugate Gradient method, incorporating the details of the detector and noise correlations. Cross-correlation with WMAP sky maps, as well as analysis from simulations, reveal that our maps are unbiased at multipoles ell > 300. This paper accompanies the public release of the 148 GHz southern stripe maps from 2008. The techniques described here will be applied to future maps and data releases.Comment: 20 pages, 18 figures, 6 tables, an ACT Collaboration pape

The Atacama Cosmology Telescope: Sunyaev Zel'dovich Selected Galaxy Clusters at 148 GHz in the 2008 Survey

We report on twenty-three clusters detected blindly as Sunyaev-Zel'dovich (SZ) decrements in a 148 GHz, 455 square-degree map of the southern sky made with data from the Atacama Cosmology Telescope 2008 observing season. All SZ detections announced in this work have confirmed optical counterparts. Ten of the clusters are new discoveries. One newly discovered cluster, ACT-CL J0102-4915, with a redshift of 0.75 (photometric), has an SZ decrement comparable to the most massive systems at lower redshifts. Simulations of the cluster recovery method reproduce the sample purity measured by optical follow-up. In particular, for clusters detected with a signal-to-noise ratio greater than six, simulations are consistent with optical follow-up that demonstrated this subsample is 100% pure. The simulations further imply that the total sample is 80% complete for clusters with mass in excess of 6x10^14 solar masses referenced to the cluster volume characterized by five hundred times the critical density. The Compton y -- X-ray luminosity mass comparison for the eleven best detected clusters visually agrees with both self-similar and non-adiabatic, simulation-derived scaling laws.Comment: 13 pages, 7 figures, Accepted for publication in Ap

The Atacama Cosmology Telescope: Cosmological parameters from three seasons of data

We present constraints on cosmological and astrophysical parameters from high-resolution microwave background maps at 148 GHz and 218 GHz made by the Atacama Cosmology Telescope (ACT) in three seasons of observations from 2008 to 2010. A model of primary cosmological and secondary foreground parameters is fit to the map power spectra and lensing deflection power spectrum, including contributions from both the thermal Sunyaev-Zeldovich (tSZ) effect and the kinematic Sunyaev-Zeldovich (kSZ) effect, Poisson and correlated anisotropy from unresolved infrared sources, radio sources, and the correlation between the tSZ effect and infrared sources. The power ell^2 C_ell/2pi of the thermal SZ power spectrum at 148 GHz is measured to be 3.4 +\- 1.4 muK^2 at ell=3000, while the corresponding amplitude of the kinematic SZ power spectrum has a 95% confidence level upper limit of 8.6 muK^2. Combining ACT power spectra with the WMAP 7-year temperature and polarization power spectra, we find excellent consistency with the LCDM model. We constrain the number of effective relativistic degrees of freedom in the early universe to be Neff=2.79 +\- 0.56, in agreement with the canonical value of Neff=3.046 for three massless neutrinos. We constrain the sum of the neutrino masses to be Sigma m_nu < 0.39 eV at 95% confidence when combining ACT and WMAP 7-year data with BAO and Hubble constant measurements. We constrain the amount of primordial helium to be Yp = 0.225 +\- 0.034, and measure no variation in the fine structure constant alpha since recombination, with alpha/alpha0 = 1.004 +/- 0.005. We also find no evidence for any running of the scalar spectral index, dns/dlnk = -0.004 +\- 0.012.Comment: 26 pages, 22 figures. This paper is a companion to Das et al. (2013) and Dunkley et al. (2013). Matches published JCAP versio

Investigating the spatial resolution characteristics of a monolithic scintillation detector for pet

A key component of a PET system is the detection of the coincident gamma rays associated with positron decay. For most applications, the modern commercial scanners are limited by sensitivity. Although essentially all current commercial PET systems use pixelated designs, there has been a resurgence of the use of continuous crystal designs, particularly for preclinical scanner designs. There has also been a move away from the traditional Anger logic style of position decoding toward implementation of statistical estimation algorithms to locate an event in two or three dimensions. Continuous crystals offer advantages of improved position sampling, reduced dead space, and the ability to calibrate light-spread to measure the depth-of-interaction (DOI) to reduce parallax errors. The aim of this thesis is to study the factors that affect the performance of continuous crystals in an attempt to achieve the best trade-off between light-output, stopping power, light-spread, and sampling, while maintaining high sensitivity and good spatial and energy resolution. The methodology includes a combination of Monte Carlo simulations and experiments with continuous LYSO crystals of various thicknesses, with particular focus on a 25-mm thick crystal, which is on par with the pixels used in clinical scanners. Non-invasive techniques involving the use of sandpaper, paints, and films are used to maximize the light extraction from the crystal, and to reduce the edge effects. The effect of DOI on the light spread is investigated and a DOI calibration technique is implemented, which allows for a 2-level depth separation of events. Lastly, a more invasive technique of cutting slots into the crystal surface is investigated to control the light spread within the crystal to improve the spatial resolution. Combining 8-mm deep slots with selective darkening of the crystal sides we improve the spatial resolution of the 25-mm thick LYSO crystal from 5.3 mm to 3.5 mm (FWHM) using Maximum Likelihood positioning, with a 3% loss in energy resolution and no DOI information

Investigating the spatial resolution characteristics of a monolithic scintillation detector for pet

A key component of a PET system is the detection of the coincident gamma rays associated with positron decay. For most applications, the modern commercial scanners are limited by sensitivity. Although essentially all current commercial PET systems use pixelated designs, there has been a resurgence of the use of continuous crystal designs, particularly for preclinical scanner designs. There has also been a move away from the traditional Anger logic style of position decoding toward implementation of statistical estimation algorithms to locate an event in two or three dimensions. Continuous crystals offer advantages of improved position sampling, reduced dead space, and the ability to calibrate light-spread to measure the depth-of-interaction (DOI) to reduce parallax errors. The aim of this thesis is to study the factors that affect the performance of continuous crystals in an attempt to achieve the best trade-off between light-output, stopping power, light-spread, and sampling, while maintaining high sensitivity and good spatial and energy resolution. The methodology includes a combination of Monte Carlo simulations and experiments with continuous LYSO crystals of various thicknesses, with particular focus on a 25-mm thick crystal, which is on par with the pixels used in clinical scanners. Non-invasive techniques involving the use of sandpaper, paints, and films are used to maximize the light extraction from the crystal, and to reduce the edge effects. The effect of DOI on the light spread is investigated and a DOI calibration technique is implemented, which allows for a 2-level depth separation of events. Lastly, a more invasive technique of cutting slots into the crystal surface is investigated to control the light spread within the crystal to improve the spatial resolution. Combining 8-mm deep slots with selective darkening of the crystal sides we improve the spatial resolution of the 25-mm thick LYSO crystal from 5.3 mm to 3.5 mm (FWHM) using Maximum Likelihood positioning, with a 3% loss in energy resolution and no DOI information