A Planetary lensing feature in caustic-crossing high-magnification microlensing events

Current microlensing follow-up observations focus on high-magnification events because of the high efficiency of planet detection. However, central perturbations of high-magnification events caused by a planet can also be produced by a very close or a very wide binary companion, and the two kinds of central perturbations are not generally distinguished without time consuming detailed modeling (a planet-binary degeneracy). Hence, it is important to resolve the planet-binary degeneracy that occurs in high-magnification events. In this paper, we investigate caustic-crossing high-magnification events caused by a planet and a wide binary companion. From this study, we find that because of the different magnification excess patterns inside the central caustics induced by the planet and the binary companion, the light curves of the caustic-crossing planetary-lensing events exhibit a feature that is discriminated from those of the caustic-crossing binary-lensing events, and the feature can be used to immediately distinguish between the planetary and binary companions. The planetary-lensing feature appears in the interpeak region between the two peaks of the caustic-crossings. The structure of the interpeak region for the planetary-lensing events is smooth and convex or boxy, whereas the structure for the binary-lensing events is smooth and concave. We also investigate the effect of a finite background source star on the planetary-lensing feature in the caustic-crossing high-magnification events. From this, we find that the convex-shaped interpeak structure appears in a certain range that changes with the mass ratio of the planet to the planet-hosting star.Comment: 14 pages, 4 figures. Accepted for publication in Ap

Trabecular structural difference between the superior and inferior regions of the vertebral body: a cadaveric and clinical study

BackgroundOsteoporotic vertebral compression fractures commonly involve the superior vertebral body; however, their associated causes have not yet been clearly established. This study aimed to determine the trabecular structural differences between the superior and inferior regions of the vertebral body using cadaveric and clinical studies.Materials and methodsFirst, five vertebrae were collected from three human cadavers. The trabecular structures of the superior and inferior regions of each vertebral body were analyzed using micro-computed tomography (micro-CT), finite element analysis (FEA), and biomechanical test. Based on the results of the ex vivo study, we conducted a clinical study. Second, spine CT images were retrospectively collected. Bone volume and Hounsfield unit were analyzed for 192 vertebral bodies. Finally, after sample size calculation based on the pilot study, prospectively, 200 participants underwent dual-energy X-ray absorptiometry (DXA) of the lateral spine. The bone mineral densities (BMDs) of the superior and inferior regions of each lumbar vertebral body were measured. The paired t-test and Wilcoxon signed-rank test were used for the statistical analyses, and p-value < 0.05 was considered significant.ResultsCadaver studies revealed differences between the superior and inferior trabecular bone structures. The bone volume ratio, BMD, and various other trabecular parameters advocated for decreased strength of the superior region. Throughout the biomechanical study, the limitations of the compression force were 3.44 and 4.63 N/m2 for the superior and inferior regions, respectively. In the FEA study, the inferior region had a lower average displacement and higher von Mises stress than the superior region. In the clinical spine CT-based bone volume and BMD study, the bone volume was significantly higher in the inferior region than in the superior region. In the lateral spine DXA, the mean BMD of the superior region of vertebral bodies was significantly lower compared with that of the inferior region.ConclusionThe superior trabecular structure of the lumbar vertebral bodies possesses more biomechanical susceptibility compared with the inferior trabecular structure, confirming its dominant role in causing osteoporotic vertebral fractures. Physicians should also focus on the BMD values of the superior region of the vertebral body using lateral spine DXA to evaluate osteoporosis

Low dietary inorganic phosphate affects the lung growth of developing mice

Inorganic phosphate (Pi) plays a critical role in diverse cellular functions, and regulating the Pi balance is accomplished by sodium-dependent Pi co-transporter (NPT). Pulmonary NPT has recently been identified in mammalian lungs. However, to date, many of the studies that have involved Pi have mainly focused on its effect on bone and kidney. Therefore, current study was performed to discover the potential effects of low Pi on the lung of developing transgenic mice expressing the renilla/firefly luciferase dual reporter gene. Two-weeks old male mice divided into 2 groups and these groups were fed either a low PI diet or a normal control diet (normal: 0.5% Pi, low: 0.1% Pi) for 4 weeks. After 4 weeks of the diet, all the mice were sacrificed. Their lungs were harvested and analyzed by performing luciferase assay, Western blotting, kinase assay and immunohistochemistry. Our results demonstrate that low Pi affects the lungs of developing mice by disturbing protein translation, the cell cycle and the expression of fibroblast growth factor-2. These results suggest that optimally regulating Pi consumption may be important to maintain health

Broad targeting of resistance to apoptosis in cancer

Apoptosis or programmed cell death is natural way of removing aged cells from the body. Most of the anti-cancer therapies trigger apoptosis induction and related cell death networks to eliminate malignant cells. However, in cancer, de-regulated apoptotic signaling, particularly the activation of an anti-apoptotic systems, allows cancer cells to escape this program leading to uncontrolled proliferation resulting in tumor survival, therapeutic resistance and recurrence of cancer. This resistance is a complicated phenomenon that emanates from the interactions of various molecules and signaling pathways. In this comprehensive review we discuss the various factors contributing to apoptosis resistance in cancers. The key resistance targets that are discussed include (1) Bcl-2 and Mcl-1 proteins; (2) autophagy processes; (3) necrosis and necroptosis; (4) heat shock protein signaling; (5) the proteasome pathway; (6) epigenetic mechanisms; and (7) aberrant nuclear export signaling. The shortcomings of current therapeutic modalities are highlighted and a broad spectrum strategy using approaches including (a) gossypol; (b) epigallocatechin-3-gallate; (c) UMI-77 (d) triptolide and (e) selinexor that can be used to overcome cell death resistance is presented. This review provides a roadmap for the design of successful anti-cancer strategies that overcome resistance to apoptosis for better therapeutic outcome in patients with cancer

A pilot study to evaluate the effect of Taeumjowi-tang on obesity in Korean adults: study protocol for a randomised, double-blind, placebo-controlled, multicentre trial

<p>Abstract</p> <p>Background</p> <p>Obesity, which is described as excessive or abnormal body fat, increases the risk of diet-related diseases. In Korea and around the world, the prevalence of obesity has grown annually from 1998 to 2008. This growth has continued despite various therapeutic efforts. The discovery of new and alternative treatments for obesity should be considered an important priority. Taeumjowi-tang (TJ001), a traditional Korean medicinal extract consisting of eight herbs, is a widely used herbal remedy for obesity in Korea. However, the efficacy and safety of TJ001 have not been fully investigated in a clinical trial. The purpose of this pilot study is to estimate obesity-related parameters and to assess the efficacy and safety of TJ001.</p> <p>Methods</p> <p>Our study is a randomised, double-blind, placebo-controlled, multicentre clinical trial of Taeumjowi-tang (TJ001). For this study, we will recruit obese Korean patients of both sexes, ages 18 to 65 years, from four university hospitals. A total of 104 subjects will be recruited. The participants will receive either 7 g of TJ001 or a placebo three times daily for 12 weeks. The primary end point will be the rate of subjects who lose at least 5% of their baseline body weight. The secondary end points will be changes in body weight, body mass index, waist circumference, hip circumference, waist/hip circumference ratio, lipid profiles, body fat composition, blood pressure, fasting glucose concentration, C-reactive protein and questionnaires related to the quality of life. The outcomes will be measured every 4 weeks. The study period will be 12 weeks and will include a total of five visits with each subject (at screening and at 0, 4, 8 and 12 weeks).</p> <p>Conclusions</p> <p>The results of our study will inform various estimates of TJ001 and will serve as the basis for a larger-scale trial. This study will assess the efficacy and safety of TJ001 as an alternative herbal remedy for obesity.</p> <p>Trial registration</p> <p>Current Controlled Trials <a href="http://www.controlled-trials.com/ISRCTN87153759">ISRCTN87153759</a></p

Ruthenium oxide-carbon-based nanofiller-reinforced conducting polymer nanocomposites and their supercapacitor applications.

In this review article, we have presented for the first time the new applications of supercapacitor technologies and working principles of the family of RuO2-carbon-based nanofiller-reinforced conducting polymer nanocomposites. Our review focuses on pseudocapacitors and symmetric and asymmetric supercapacitors. Over the last years, the supercapacitors as a new technology in energy storage systems have attracted more and more attention. They have some unique characteristics such as fast charge/discharge capability, high energy and power densities, and long stability. However, the need for economic, compatible, and easy synthesis materials for supercapacitors have led to the development of RuO2-carbon-based nanofiller-reinforced conducting polymer nanocomposites with RuO2. Therefore, the aim of this manuscript was to review RuO2-carbon-based nanofiller-reinforced conducting polymer nanocomposites with RuO2 over the last 17 years

3D bioactive composite scaffolds for bone tissue engineering

Bone is the second most commonly transplanted tissue worldwide, with over four million operations using bone grafts or bone substitute materials annually to treat bone defects. However, significant limitations affect current treatment options and clinical demand for bone grafts continues to rise due to conditions such as trauma, cancer, infection and arthritis. Developing bioactive three-dimensional (3D) scaffolds to support bone regeneration has therefore become a key area of focus within bone tissue engineering (BTE). A variety of materials and manufacturing methods including 3D printing have been used to create novel alternatives to traditional bone grafts. However, individual groups of materials including polymers, ceramics and hydrogels have been unable to fully replicate the properties of bone when used alone. Favourable material properties can be combined and bioactivity improved when groups of materials are used together in composite 3D scaffolds. This review will therefore consider the ideal properties of bioactive composite 3D scaffolds and examine recent use of polymers, hydrogels, metals, ceramics and bio-glasses in BTE. Scaffold fabrication methodology, mechanical performance, biocompatibility, bioactivity, and potential clinical translations will be discussed

Graphene-Based Nanocomposites for Energy Storage

Since the first report of using micromechanical cleavage method to produce graphene sheets in 2004, graphene/graphene-based nanocomposites have attracted wide attention both for fundamental aspects as well as applications in advanced energy storage and conversion systems. In comparison to other materials, graphene-based nanostructured materials have unique 2D structure, high electronic mobility, exceptional electronic and thermal conductivities, excellent optical transmittance, good mechanical strength, and ultrahigh surface area. Therefore, they are considered as attractive materials for hydrogen (H2) storage and high-performance electrochemical energy storage devices, such as supercapacitors, rechargeable lithium (Li)-ion batteries, Li–sulfur batteries, Li–air batteries, sodium (Na)-ion batteries, Na–air batteries, zinc (Zn)–air batteries, and vanadium redox flow batteries (VRFB), etc., as they can improve the efficiency, capacity, gravimetric energy/power densities, and cycle life of these energy storage devices. In this article, recent progress reported on the synthesis and fabrication of graphene nanocomposite materials for applications in these aforementioned various energy storage systems is reviewed. Importantly, the prospects and future challenges in both scalable manufacturing and more energy storage-related applications are discussed