Dissolved methane distributions and air-sea flux in the plume of a massive seep field, Coal Oil Point, California

Author Posting. © American Geophysical Union, 2007. This article is posted here by permission of American Geophysical Union for personal use, not for redistribution. The definitive version was published in Geophysical Research Letters 34 (2007): L22603, doi:10.1029/2007GL031344.Large quantities of natural gas are emitted from the seafloor into the stratified coastal ocean near Coal Oil Point, Santa Barbara Channel, California. Methane was quantified in the down current surface water at 79 stations in a 280 km2 study area. The methane plume spread over an area of ~70 km2 and emitted on the order of 5 × 104 mol d−1 to the atmosphere. A monthly time series at 14 stations showed variable methane concentrations which were correlated with changing sub-mesoscale surface currents. Air-sea fluxes estimated from the time series indicate that the air-sea flux derived for the 280 km2 area is representative of the daily mean flux from this area. Only 1% of the dissolved methane originating from Coal Oil Point enters the atmosphere within the study area. Most of it appears to be transported below the surface and oxidized by microbial activity.The research was supported by the University of California Energy Institute and the National Science Foundation (OCE 0447395)

Atmospheric methane flux from bubbling seeps: Spatially extrapolated quantification from a Black Sea shelf area

Bubble transport of methane from shallow seep sites in the Black Sea west of the Crimea Peninsula between 70 and 112 m water depth has been studied by extrapolation of results gained through different hydroacoustic methods and direct sampling. Ship-based hydroacoustic echo sounders can locate bubble releasing seep sites very precisely and facilitate their correlation with geological or other features at the seafloor. Here, the backscatter strength of a multibeam system was integrated with single-beam data to estimate the amount of seeps/m2 for different backscatter intensities, resulting in 2709 vents in total. Direct flux measurements by submersible revealed methane fluxes from individual vents of 0.32–0.85 l/min or 14.5–37.8 mmol/min at ambient pressure and temperature conditions. A conservative estimate of 30 mmol/min per site was used to estimate the flux into the water to be 1219–1355 mmol/s. The flux to the atmosphere was calculated by applying a bubble dissolution model taking release depth, temperature, gas composition, and bubble size spectra into account. The flux into the atmosphere (3930–4533 mol/d) or into the mixed layer (6186–6899 mol/d) from the 21.8 km2 large study area is three times higher than independently measured fluxes of dissolved methane for the same area using geochemical methods (1030–2495 mol/d). The amount of methane dissolving in the mixed layer is 2256–2366 mol/d. This close match shows that the hydroacoustic approach for extrapolating the number of seeps/m2 and the applied bubble dissolution model are suitable to extrapolate methane fluxes over larger areas

Late Permian palaeomagnetic data east and west of the Urals

We studied Upper Permian redbeds from two areas, one between the Urals and the Volga River in the southeastern part of Baltica and the other in north Kazakhstan within the Ural-Mongol belt, which are about 900 km apart; a limited collection of Lower-Middle Triassic volcanics from north Kazakhstan was also studied. A high-temperature component that shows rectilinear decay to the origin was isolated from most samples of all three collections. For the Late Permian of north Kazakhstan, the area-mean direction of this component is D = 224.3°, I =−56.8°, k = 161, Α 95 = 2.7°, N = 18 sites, palaeopole at 53.4°N, 161.3°E; the fold test is positive. The Triassic result ( D = 55.9°, I =+69.1°, k = 208, Α 95 = 4.2°, N = 7 sites, pole at 57.0°N, 134.1°E) is confirmed by a positive reversal test. The corresponding palaeomagnetic poles from north Kazakhstan show good agreement with the APWP for Baltica, thus indicating no substantial motion between the two areas that are separated by the Urals. Our new mean Late Permian direction for SE Baltica ( D = 42.2°, I = 39.2°, k = 94, Α 95 = 3.5°, N = 17 sites; palaeopole at 45.6°N, 170.2°E) is confirmed as near-primary by a positive tilt test and the presence of dual-polarity directions. The corresponding pole also falls on the APWP of Baltica, but is far-sided with respect to the coeval reference poles, as the observed mean inclination is shallower than expected by 13°± 4°. In principle, lower-than-expected inclinations may be attributed to one or more of the following causes: relative tectonic displacements, quadrupole and octupole terms in the geomagnetic field, higher-order harmonics (incl. secular variation) of the same field, random scatter, non-removed overprints, or inclination error during remanence acquisition and/or diagenetic compaction. Our analysis shows that most mechanisms from the above list cannot explain the observed pattern, leaving as the most likely option that it must be accounted for by inclination shallowing. Comparison with selected coeval results from eastern Baltica (all within Russia) shows that all of them are biased in the same way. This implies that they cannot be used for analysis of geomagnetic field characteristics, such as non-dipole contributions, without a more adequate knowledge of the required correction for inclination shallowing.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/71899/1/j.1365-246X.2008.03727.x.pd

Unified Structural Representation of the southern California crust and upper mantle

We present a new, 3D description of crust and upper mantle velocity structure in southern California implemented as a Unified Structural Representation (USR). The USR is comprised of detailed basin velocity descriptions that are based on tens of thousands of direct velocity (Vp, Vs) measurements and incorporates the locations and displacement of major fault zones that influence basin structure. These basin descriptions were used to developed tomographic models of crust and upper mantle velocity and density structure, which were subsequently iterated and improved using 3D waveform adjoint tomography. A geotechnical layer (GTL) based on Vs30 measurements and consistent with the underlying velocity descriptions was also developed as an optional model component. The resulting model provides a detailed description of the structure of the southern California crust and upper mantle that reflects the complex tectonic history of the region. The crust thickens eastward as Moho depth varies from 10 to 40 km reflecting the transition from oceanic to continental crust. Deep sedimentary basins and underlying areas of thin crust reflect Neogene extensional tectonics overprinted by transpressional deformation and rapid sediment deposition since the late Pliocene. To illustrate the impact of this complex structure on strong ground motion forecasting, we simulate rupture of a proposed M 7.9 earthquake source in the Western Transverse Ranges. The results show distinct basin amplification and focusing of energy that reflects crustal structure described by the USR that is not captured by simpler velocity descriptions. We anticipate that the USR will be useful for a broad range of simulation and modeling efforts, including strong ground motion forecasting, dynamic rupture simulations, and fault system modeling. The USR is available through the Southern California Earthquake Center (SCEC) website (http://www.scec.org)

Methane Clumped Isotopes: Progress and Potential for a New Isotopic Tracer

The isotopic composition of methane is of longstanding geochemical interest, with important implications for understanding petroleum systems, atmospheric greenhouse gas concentrations, the global carbon cycle, and life in extreme environments. Recent analytical developments focusing on multiply substituted isotopologues (‘clumped isotopes’) are opening a valuable new window into methane geochemistry. When methane forms in internal isotopic equilibrium, clumped isotopes can provide a direct record of formation temperature, making this property particularly valuable for identifying different methane origins. However, it has also become clear that in certain settings methane clumped isotope measurements record kinetic rather than equilibrium isotope effects. Here we present a substantially expanded dataset of methane clumped isotope analyses, and provide a synthesis of the current interpretive framework for this parameter. In general, clumped isotope measurements indicate plausible formation temperatures for abiotic, thermogenic, and microbial methane in many geological environments, which is encouraging for the further development of this measurement as a geothermometer, and as a tracer for the source of natural gas reservoirs and emissions. We also highlight, however, instances where clumped isotope derived temperatures are higher than expected, and discuss possible factors that could distort equilibrium formation temperature signals. In microbial methane from freshwater ecosystems, in particular, clumped isotope values appear to be controlled by kinetic effects, and may ultimately be useful to study methanogen metabolism

Processing of multibeam water column image data for automated bubble/seep detection and repeated mapping

Water Column Imaging Multibeam Echosounder Systems (MBES) are effective and sensitive tools for investigating free gas (bubble) release and its rise through the water column. The main advantages of MBES are the detection range and lateral coverage in the water column and at the seafloor; furthermore, they are becoming increasingly available on research vessels worldwide. However, high noise levels and systematic artefacts due to side-lobe induced signal interference degrade MBES Water Column Images (WCIs) and hampered automated bubble detection and related gas seepage investigations. We present a new technique advancing automated detection of bubble streams and moving toward a quantitative gas-release assessment. It is shown that bubble streams can be detected reliably by their spatio-temporal behavior even when they are discontinuous in WCI data. Using assumptions about the bubble rising trajectories, bubble release spots at the seafloor can be traced even if the source location is obscured by acoustic noise or unwanted acoustic targets. A map with acoustic response and source locations of bubbles being released can be produced and serves as a starting point for more detailed quantitative analyses. The efficiency of the method has been assessed at a methane seep site in the Dutch North Sea. Multiple survey lines are merged to a detailed acoustic map of the area. Processed results are in good agreement with manual investigations of the WCI data as well as ROV-based video analysis