Systemic Creativities in Sustainability and Social Innovation Education

AbstractThe aim of this paper is to aid educators in sustainability or social innovation to make sense of their creativity. We use a systems model of creativity (Csikszentmihalyi 1988, 1996, 1999) as an enquiring device to tease out issues that influence creativity within these realms. Data from semi-structured interviews with senior and junior educators in two geographical locations lead us to elaborate two systems models to reflect creativity. These models portray creativity as emerging from the alignment of and connections between creators, domains and field elements as suggested by Csikszentmihalyi. However, we also identify some intermediary or absent connections between the model elements which deserve further attention, as their uncritical pursuit could potentially exacerbate exclusion or marginalisation of junior educators' personal values and interests. Therefore, critically and creatively informed learning could be better cultivated in these realms. This and other insights could have important implications for how creativity and its nurturing in education could be advanced in the long run

Spearhead Nanometric Field-Effect Transistor Sensors for Single-Cell Analysis.

Nanometric field-effect-transistor (FET) sensors are made on the tip of spear-shaped dual carbon nanoelectrodes derived from carbon deposition inside double-barrel nanopipettes. The easy fabrication route allows deposition of semiconductors or conducting polymers to comprise the transistor channel. A channel from electrodeposited poly pyrrole (PPy) exhibits high sensitivity toward pH changes. This property is exploited by immobilizing hexokinase on PPy nano-FETs to give rise to a selective ATP biosensor. Extracellular pH and ATP gradients are key biochemical constituents in the microenvironment of living cells; we monitor their real-time changes in relation to cancer cells and cardiomyocytes. The highly localized detection is possible because of the high aspect ratio and the spear-like design of the nano-FET probes. The accurately positioned nano-FET sensors can detect concentration gradients in three-dimensional space, identify biochemical properties of a single living cell, and after cell membrane penetration perform intracellular measurements

Saharan and arabian dust aerosols: a comparative case study of lidar ratio

El volumen 119 de 2016 de la revista EPJ Web of Conferences recoge las ponencias del 27th International Laser Radar Conference (ILRC 27)This work presents a first comparative study of the Lidar Ratio (LR) values obtained for dust particles in two singular dust-influenced regions: the Canary Islands (Spain, close to the African coast in the North Atlantic Ocean), frequently affected by Saharan dust intrusions, and the Kuwait area (Arabian Peninsula) as usually influenced by Arabian dust storms. Synergetic lidar and sun-photometry measurements are carried out in two stations located in these particular regions for that purpose. Several dusty cases were observed during 2014 in both stations and, just for illustration, two specific dusty case studies have been selected and analyzed to be shown in this work. In general, mean LR values of 54 sr and 40 sr were obtained in these studies cases for Saharan and Arabian dust particles, respectively. Indeed, these results are in agreement with other studies performed for dust particles arriving from similar desert areas. In particular, the disparity found in Saharan and Arabian dust LR values can be based on the singular composition of the suspended dust aerosols over each station. These results can be useful for CALIPSO extinction retrievals, where a single LR value (40 sr) is assumed for pure dust particles independently on the dust source region.This work has been supported by both the Spanish Ministerio de Economía y Competitividad (MINECO) under grant CGL2011-24891 (AMISOC project) and the Kuwait Foundation for the Advancement of Sciences under project 2011- 1401-01

Nanosensors for the detection of hydrogen peroxide

Prussian Blue (PB) deposited on a nanoelectrode is the basis for an amperometric hydrogen peroxide sensor. Carbon nanoelectrodes, fabricated from pyrolytic decomposition of butane within a quartz nanopipette, were electrochemically etched and PB was deposited in the formed nanocavity. This procedure significantly increased the stability of PB films while maintaining a high mean sensitivity of 50 A mol− 1 l cm− 2 for H2O2 detection at − 50 mV vs. Ag/AgCl (0.1 M Cl−) at neutral pH value. Hydrogen peroxide was selectively quantified in the concentration range from 10 μM to 3 mM. We envision the application of these nanosensors to the intracellular monitoring of oxidative stress in living cells

Practical computational toolkits for dendrimers and dendrons structure design

Dendrimers and dendrons offer an excellent platform for developing novel drug delivery systems and medicines. The rational design and further development of these repetitively branched systems are restricted by difficulties in scalable synthesis and structural determination, which can be overcome by judicious use of molecular modelling and molecular simulations. A major difficulty to utilise in silico studies to design dendrimers lies in the laborious generation of their structures. Current modelling tools utilise automated assembly of simpler dendrimers or the inefficient manual assembly of monomer precursors to generate more complicated dendrimer structures. Herein we describe two novel graphical user interface (GUI) toolkits written in Python that provide an improved degree of automation for rapid assembly of dendrimers and generation of their 2D and 3D structures. Our first toolkit uses the RDkit library, SMILES nomenclature of monomers and SMARTS reaction nomenclature to generate SMILES and mol files of dendrimers without 3D coordinates. These files are used for simple graphical representations and storing their structures in databases. The second toolkit assembles complex topology dendrimers from monomers to construct 3D dendrimer structures to be used as starting points for simulation using existing and widely available software and force fields. Both tools were validated for ease-of-use to prototype dendrimer structure and the second toolkit was especially relevant for dendrimers of high complexity and size.Peer reviewe

Multicenter, International Study of MIC/ MEC Distributions for definition of epidemiological cutoff values for sporothrix species identified by molecular methods

Clinical and Laboratory Standards Institute (CLSI) conditions for testing the susceptibilities of pathogenic Sporothrix species to antifungal agents are based on a collaborative study that evaluated five clinically relevant isolates of Sporothrix schenckii sensu lato and some antifungal agents. With the advent of molecular identification, there are two basic needs: to confirm the suitability of these testing conditions for all agents and Sporothrix species and to establish species-specific epidemiologic cutoff values (ECVs) or breakpoints (BPs) for the species. We collected available CLSI MICs/minimal effective concentrations (MECs) of amphotericin B, five triazoles, terbinafine, flucytosine, and caspofungin for 301 Sporothrix schenckii sensu stricto, 486 S. brasiliensis, 75 S. globosa, and 13 S. mexicana molecularly identified isolates. Data were obtained in 17 independent laboratories (Australia, Europe, India, South Africa, and South and North America) using conidial inoculum suspensions and 48 to 72 h of incubation at 35°C. Sufficient and suitable data (modal MICs within 2-fold concentrations) allowed the proposal of the following ECVs for S. schenckii and S. brasiliensis, respectively: amphotericin B, 4 and 4 /ml; itraconazole, 2 and 2 μg/ml; posaconazole, 2 and 2 μg/ml; and voriconazole, 64 and 32 μg/ml. Ketoconazole and terbinafine ECVs for S. brasiliensis were 2 and 0.12 μg/ml, respectively. Insufficient or unsuitable data precluded the calculation of ketoconazole and terbinafine (or any other antifungal agent) ECVs for S. schenckii, as well as ECVs for S. globosa and S. mexicana. These ECVs could aid the clinician in identifying potentially resistant isolates (non-wild type) less likely to respond to therapy.A. Espinel-Ingroff, D. P. B. Abreu, R. Almeida-Paes, R. S. N. Brilhante, A. Chakrabarti, A. Chowdhary, F. Hagen, S. Córdoba, G. M. Gonzalez, N. P. Govender, J. Guarro, E. M. Johnson, S. E. Kidd, S. A. Pereira, A. M. Rodrigues, S. Rozental, M. W. Szeszs, R. Ballesté Alaniz, A. Bonifaz, L. X. Bonfietti, L. P. Borba-Santos, J. Capilla, A. L. Colombo, M. Dolande, M. G. Isla, M. S. C. Melhem, A. C. Mesa-Arango, M. M. E. Oliveira, M. M. Panizo, Z. Pires de Camargo, R. M. Zancope-Oliveira, J. F. Meis, J. Turnidge

Aszites, Pfortaderthrombose und hepatische Enzephalopathie bei Leberzirrhose: Aktuelle Therapieempfehlungen

Treatment of Ascites, Portal Vein Thrombosis and Hepatic Encephalopathy in Patients with Cirrhosis of the Liver Background: Ascites, portal vein thrombosis and hepatic encephalopathy are important complications of cirrhosis of the liver. Guidelines for the treatment of ascites have recently been published. Method: This manuscript summarizes up-to-date recommendations on the basis of the DGVS S3 guideline and of other guidelines as well as of the authors' experience. Results and Conclusions: TIPS (transjugular intrahepatic porto-systemic shunt) is the preferred treatment for refractory or recidivant ascites unless there are contraindications. The therapy of hepatorenal syndrome type 1 with albumin and the vasoconstrictor Terlipressin has been proven effective. Treatment of portal vein thrombosis comprises a strategy of anticoagulation, TIPS and liver transplantation. The most important therapeutic strategy for hepatic encephalopathy is the search for as well as the treatment of trigger events. Rifaximin is being increasingly used for the treatment and prophylaxis of hepatic encephalopathy

Measurement of the Bottom-Strange Meson Mixing Phase in the Full CDF Data Set

We report a measurement of the bottom-strange meson mixing phase \beta_s using the time evolution of B0_s -> J/\psi (->\mu+\mu-) \phi (-> K+ K-) decays in which the quark-flavor content of the bottom-strange meson is identified at production. This measurement uses the full data set of proton-antiproton collisions at sqrt(s)= 1.96 TeV collected by the Collider Detector experiment at the Fermilab Tevatron, corresponding to 9.6 fb-1 of integrated luminosity. We report confidence regions in the two-dimensional space of \beta_s and the B0_s decay-width difference \Delta\Gamma_s, and measure \beta_s in [-\pi/2, -1.51] U [-0.06, 0.30] U [1.26, \pi/2] at the 68% confidence level, in agreement with the standard model expectation. Assuming the standard model value of \beta_s, we also determine \Delta\Gamma_s = 0.068 +- 0.026 (stat) +- 0.009 (syst) ps-1 and the mean B0_s lifetime, \tau_s = 1.528 +- 0.019 (stat) +- 0.009 (syst) ps, which are consistent and competitive with determinations by other experiments.Comment: 8 pages, 2 figures, Phys. Rev. Lett 109, 171802 (2012

Epidemiology of Invasive Fungal Infections in Latin America

The pathogenic role of invasive fungal infections (IFIs) has increased during the past two decades in Latin America and worldwide, and the number of patients at risk has risen dramatically. Working habits and leisure activities have also been a focus of attention by public health officials, as endemic mycoses have provoked a number of outbreaks. An extensive search of medical literature from Latin America suggests that the incidence of IFIs from both endemic and opportunistic fungi has increased. The increase in endemic mycoses is probably related to population changes (migration, tourism, and increased population growth), whereas the increase in opportunistic mycoses may be associated with the greater number of people at risk. In both cases, the early and appropriate use of diagnostic procedures has improved diagnosis and outcome

Benign follicular tumors

Benign follicular tumors comprise a large and heterogeneous group of neoplasms that share a common histogenesis and display morphological features resembling one or several portions of the normal hair follicle, or recapitulate part of its embryological development. Most cases present it as clinically nondescript single lesions and essentially of dermatological relevance. Occasionally, however, these lesions be multiple and represent a cutaneous marker of complex syndromes associated with an increased risk of visceral neoplasms. In this article, the authors present the microscopic structure of the normal hair follicle as a basis to understand the type and level of differentiation of the various follicular tumors. The main clinicopathological features and differential diagnosis of benign follicular tumors are then discussed, including dilated pore of Winer, pilar sheath acanthoma, trichoadenoma, trichilemmoma, infundibuloma, proliferating trichilemmal cyst/tumor, trichoblastoma and its variants, pilomatricoma, trichodiscoma/fibrofolliculoma, neurofollicular hamartoma and trichofolliculoma. In addition, the main syndromes presenting with multiple follicular tumors are also discussed, namely Cowden, Birt-Hogg-Dubé, Rombo and Bazex-Dupré-Christol syndromes, as well as multiple tumors of follicular infundibulum (infundibulomatosis) and multiple trichoepitheliomas. Although the diagnosis of follicular tumors relies on histological examination, we highlight the importance of their knowledge for the clinician, especially when in presence of patients with multiple lesions that may be the cutaneous marker of a cancer-prone syndrome. The dermatologist is therefore in a privileged position to recognize these lesions, which is extremely important to provide further propedeutic, appropriate referral and genetic counseling for these patients.info:eu-repo/semantics/publishedVersio