777 research outputs found
High density Schottky barrier IRCCD sensors for SWIR applications at intermediate temperature
Monolithic 32 x 64 and 64 x 1:128 palladium silicide (Pd2Si) interline transfer infrared charge coupled devices (IRCCDs) sensitive in the 1 to 3.5 micron spectral band were developed. This silicon imager exhibits a low response nonuniformity of typically 0.2 to 1.6% rms, and was operated in the temperature range between 40 to 140 K. Spectral response measurements of test Pd2Si p-type Si devices yield quantum efficiencies of 7.9% at 1.25 microns, 5.6% at 1.65 microns 2.2% at 2.22 microns. Improvement in quantum efficiency is expected by optimizing the different structural parameters of the Pd2Si detectors. The spectral response of the Pd2Si detectors fit a modified Fowler emission model. The measured photo-electric barrier height for the Pd2Si detectors is 0.34 eV and the measured quantum efficiency coefficient, C1, is 19%/eV. The dark current level of Pd2Si Schottky barrier focal plane arrays (FPAs) is sufficiently low to enable operation at intermediate temperatures at TV frame rates. Typical dark current level measured at 120 K on the FPA is 2 nA/sq cm. The operating temperature of the Pd2Si FPA is compatible with passive cooler performance. In addition, high density Pd2Si Schottky barrier FPAs are manufactured with high yield and therefore represent an economical approach to short wavelength IR imaging. A Pd2Si Schottky barrier image sensor for push-broom multispectral imaging in the 1.25, 1.65, and 2.22 micron bands is being studied. The sensor will have two line arrays (dual band capability) of 512 detectors each, with 30 micron center-to-center detector spacing. The device will be suitable for chip-to-chip abutment, thus providing the capability to produce large, multiple chip focal planes with contiguous, in-line sensors
Recommended from our members
Intumescent Flame Retardant Polyamide 11 Nanocomposites
Current polyamide 11 and 12 are lacking in fire retardancy and high strength/high heat
resistance characteristics for a plethora of fabricated parts that are desired and required
for performance driven applications. The introduction of selected nanoparticles such as
surface modified montmorillonite (MMT) clay or carbon nanofibers (CNFs), combined
with a conventional intumescent flame retardant (FR) additive into the polyamide
11/polyamide 12 (PA11/PA12) by melt processing conditions has resulted in the
preparation of a family of intumescent polyamide nanocomposites. These intumescent
polyamide 11 and 12 nanocomposites exhibit enhanced polymer performance
characteristics, i.e., fire retardancy, high strength and high heat resistance and are
expected to expand the market opportunities for polyamide 11 and polyamide 12 polymer
manufacturers.
The objective of this research is to develop improved polyamide 11 and 12 polymers with
enhanced flame retardancy, thermal, and mechanical properties for selective laser
sintering (SLS) rapid manufacturing (RM). In the present study, a nanophase was
introduced into the polyamide 11 and combining it with a conventional intumescent FR
additive via twin screw extrusion. Arkema RILSAN® polyamide 11 molding polymer
pellets were examined with two types of nanoparticles: chemically modified
montmorillonite (MMT) organoclays, and carbon nanofibers (CNFs); and Clairant’s
Exolit® OP 1230 intumescent FR additive were used to create a family of FR
intumescent polyamide 11 nanocomposites.
Transmission electron microscopy (TEM) was used to determine the degree of
nanoparticles dispersion. Injection molded specimens were fabricated for physical,
thermal, and flammability measurements. Thermal stability of these intumescent
polyamide 11 nanocomposites was examined by TGA. Flammability properties were
obtained using the Cone Calorimeter at an external heat flux of 35 kW/m
2
and UL 94
Test Method. Heat deflection temperatures (HDT) were also measured. TEM
micrographs, physical, thermal, and flammability properties are presented. FR
intumescent polyamide 11 nanocomposites properties are compared with polyamide 11
baseline polymer. Based on flammability and mechanical material performance, selective
polymers including polyamide 11 nanocomposites and control polyamide 11 will be
cryogenically ground into fine powders for SLS RM processing. SLS specimens will be
fabricated for thermal, flammability, and mechanical properties characterization.Mechanical Engineerin
Interest and barriers to research in obstetric haematology – findings from a national survey in the United Kingdom
Introduction: In 2021, the steering committee members of British Society of Haematology Obstetric Haematology Special Interest Group noted difficulties in opening research studies. This led to the development of a survey to further evaluate this issue. Method: An electronic survey was distributed to all members of the British Society of Haematology Obstetric Haematology Special Interest Group and to relevant specialty leads of the National Institute for Health and Care Research Clinical Research Network for further dissemination within these networks. Results: Responses were received from 65 participants (73% consultant grade); mainly haematologists (52%) or obstetricians (39%). Less than a third of participants reported dedicated time for research in their job plan, with only five participants reporting no challenges in opening research studies in obstetric haematology. Discussion: The survey confirmed significant interest in obstetric haematology research, with barriers to participation. We propose further actions to facilitate increased research
Recommended from our members
Mobile app use to support therapeutic exercise for musculoskeletal pain conditions may help improve pain intensity and self-reported physical function: a systematic review
QUESTION: What is the effect of therapeutic exercise or tailored physical activity programs supported by a mobile app (compared with exercise or physical activity programs delivered using other modes) for people with musculoskeletal pain conditions? DESIGN: Systematic review of published randomised controlled trials with meta-analysis. PARTICIPANTS: People of all ages with musculoskeletal pain conditions. INTERVENTION: Therapeutic exercise or tailored physical activity programs supported by a mobile app. OUTCOME MEASURES: Pain intensity, pain interference, self-reported physical function, physical performance, adherence, psychosocial outcomes, health-related quality of life, work participation, physical activity, goal attainment and satisfaction. RESULTS: Eleven studies were eligible for inclusion, with a total of 845 participants. There was low certainty evidence that using mobile apps to deliver exercise programs helps to reduce pain intensity to a worthwhile extent (SMD -0.60, 95% CI -0.93 to -0.27). There was low certainty evidence that using mobile apps to deliver exercise programs helps to improve self-reported physical function to a worthwhile extent (SMD -0.92, 95% CI -1.57 to -0.27). Although the effect of using mobile apps to deliver exercise programs on pain interference was also estimated to be a worthwhile benefit (SMD -0.66), this estimate came with marked uncertainty (95% CI -1.52 to 0.19) so the effect remains unclear. The remainder of the outcomes were unclear due to sparse evidence. The most common behaviour change intervention functions in the mobile app interventions were: training, enablement and environmental restructuring. CONCLUSION: Mobile apps supporting therapeutic exercise or tailored physical activity programs for musculoskeletal pain conditions may help in reducing pain intensity and improving physical function. The mobile apps utilised a limited range of behaviour change intervention functions. REGISTRATION: CRD42021248046
The Chagos Islands cases: the empire strikes back
Good governance requires the accommodation of multiple interests in the cause of decision making. However, undue regard for particular sectional interests can take their toll upon public faith in government administration. Historically, broad conceptions of the good of the commonwealth were employed to outweigh the interests of groups that resisted colonisation. In the decision making of the British Empire, the standard approach for justifying the marginalisation of the interests of colonised groups was that they were uncivilised and that particular hardships were the price to be paid for bringing to them the imperial dividend of industrial society. It is widely assumed that with the dismantling of the British Empire, such impulses and their accompanying jurisprudence became a thing of the past. Even as decolonisation proceeded apace after the Second World War, however, the United Kingdom maintained control of strategically important islands with a view towards sustaining its global role. In an infamous example from this twilight period of empire, in the 1960s imperial interests were used to justify the expulsion of the Chagos islanders from the British Indian Ocean Territory (BIOT). Into the twenty-first century, this forced elision of the UK’s interests with the imperial “common good” continues to take centre stage in courtroom battles over the islanders’ rights, being cited before domestic and international tribunals in order to maintain the Chagossians’ exclusion from their homeland. This article considers the new jurisprudence of imperialism which has emerged in a string of decisions which have continued to marginalise the Chagossians’ interests
Tn-Seq reveals hidden complexity in the utilization of host-derived glutathione in \u3cem\u3eFrancisella tularensis\u3c/em\u3e
Host-derived glutathione (GSH) is an essential source of cysteine for the intracellular pathogen Francisella tularensis. In a comprehensive transposon insertion sequencing screen, we identified several F. tularensis genes that play central and previously unappreciated roles in the utilization of GSH during the growth of the bacterium in macrophages. We show that one of these, a gene we named dptA, encodes a proton-dependent oligopeptide transporter that enables growth of the organism on the dipeptide Cys-Gly, a key breakdown product of GSH generated by the enzyme γ-glutamyltranspeptidase (GGT). Although GGT was thought to be the principal enzyme involved in GSH breakdown in F. tularensis, our screen identified a second enzyme, referred to as ChaC, that is also involved in the utilization of exogenous GSH. However, unlike GGT and DptA, we show that the importance of ChaC in supporting intramacrophage growth extends beyond cysteine acquisition. Taken together, our findings provide a compendium of F. tularensis genes required for intracellular growth and identify new players in the metabolism of GSH that could be attractive targets for therapeutic intervention
Measurement of the Bottom-Strange Meson Mixing Phase in the Full CDF Data Set
We report a measurement of the bottom-strange meson mixing phase \beta_s
using the time evolution of B0_s -> J/\psi (->\mu+\mu-) \phi (-> K+ K-) decays
in which the quark-flavor content of the bottom-strange meson is identified at
production. This measurement uses the full data set of proton-antiproton
collisions at sqrt(s)= 1.96 TeV collected by the Collider Detector experiment
at the Fermilab Tevatron, corresponding to 9.6 fb-1 of integrated luminosity.
We report confidence regions in the two-dimensional space of \beta_s and the
B0_s decay-width difference \Delta\Gamma_s, and measure \beta_s in [-\pi/2,
-1.51] U [-0.06, 0.30] U [1.26, \pi/2] at the 68% confidence level, in
agreement with the standard model expectation. Assuming the standard model
value of \beta_s, we also determine \Delta\Gamma_s = 0.068 +- 0.026 (stat) +-
0.009 (syst) ps-1 and the mean B0_s lifetime, \tau_s = 1.528 +- 0.019 (stat) +-
0.009 (syst) ps, which are consistent and competitive with determinations by
other experiments.Comment: 8 pages, 2 figures, Phys. Rev. Lett 109, 171802 (2012
Association between promoter -1607 polymorphism of MMP1 and Lumbar Disc Disease in Southern Chinese
<p>Abstract</p> <p>Background</p> <p>Matrix metalloproteinases (MMPs) are involved in the degradation of the extracellular matrix of the intervertebral disc. A SNP for guanine insertion/deletion (G/D), the -1607 promoter polymorphism, of the <it>MMP1 </it>gene was found significantly affecting promoter activity and corresponding transcription level. Hence it is a good candidate for genetic studies in DDD.</p> <p>Methods</p> <p>Southern Chinese volunteers between 18 and 55 years were recruited from the population. DDD in the lumbar spine was defined by MRI using Schneiderman's classification. Genomic DNA was isolated from the leukocytes and genotyping was performed using the Sequenom<sup>® </sup>platform. Association and Hardy-Weinberg equilibrium checking were assessed by Chi-square test and Mann-Whitney U test.</p> <p>Results</p> <p>Our results showed substantial evidence of association between -1607 promoter polymorphism of <it>MMP1 </it>and DDD in the Southern Chinese subjects. D allelic was significantly associated with DDD (p value = 0.027, odds ratio = 1.41 with 95% CI = 1.04–1.90) while Genotypic association on the presence of D allele was also significantly associated with DDD (p value = 0.046, odds ratio = 1.50 with 95% CI = 1.01–2.24). Further age stratification showed significant genotypic as well as allelic association in the group of over 40 years (genotypic: p value = 0.035, odds ratio = 1.617 with 95% CI = 1.033–2.529; allelic: p value = 0.033, odds ratio = 1.445 with 95% CI = 1.029–2.029). Disc bulge, annular tears and the Schmorl's nodes were not associated with the D allele.</p> <p>Conclusion</p> <p>We demonstrated that individuals with the presence of D allele for the -1607 promoter polymorphism of <it>MMP1 </it>are about 1.5 times more susceptible to develop DDD when compared with those having G allele only. Further association was identified in individuals over 40 years of age. Disc bulge, annular tear as well as Schmorl's nodes were not associated with this polymorphism.</p
- …