Spin structure of the nucleon: QCD evolution, lattice results and models

The question how the spin of the nucleon is distributed among its quark and gluon constituents is still a subject of intense investigations. Lattice QCD has progressed to provide information about spin fractions and orbital angular momentum contributions for up- and down-quarks in the proton, at a typical scale \mu^2~4 GeV^2. On the other hand, chiral quark models have traditionally been used for orientation at low momentum scales. In the comparison of such model calculations with experiment or lattice QCD, fixing the model scale and the treatment of scale evolution are essential. In this paper, we present a refined model calculation and a QCD evolution of lattice results up to next-to-next-to-leading order. We compare this approach with the Myhrer-Thomas scenario for resolving the proton spin puzzle.Comment: 11 pages, 6 figures, equation (9) has been corrected leading to a revised figure 1b. Revision matches published versio

Quasi-free photoproduction of η-mesons off 3He nuclei

Quasi-free photoproduction of η-mesons has been measured off nucleons bound in 3He nuclei for incident photon energies from the threshold region up to 1.4 GeV. The experiment was performed at the tagged photon facility of the Mainz MAMI accelerator with an almost 4π covering electromagnetic calorimeter, combining the TAPS and Crystal Ball detectors. The η-mesons were detected in coincidence with the recoil nucleons. This allowed a comparison of the production cross section off quasi-free protons and quasi-free neutrons and a full kinematic reconstruction of the final state, eliminating effects from nuclear Fermi motion. In the S11(1535) resonance peak, the data agree with the neutron/proton cross section ratio extracted from measurements with deuteron targets. More importantly, the prominent structure observed in photoproduction off quasi-free neutrons bound in the deuteron is also clearly observed. Its parameters (width, strength) are consistent with the expectations from the deuteron results. On an absolute scale the cross sections for both quasi-free protons and neutrons are suppressed with respect to the deuteron target pointing to significant nuclear final-state interaction effects

Diatreta Cups, Light in Roman Dining Spaces

Cage cups or Diatreta are ancient Roman glass vessels produced by creating a thick blown blank of glass that, once cooled down, is taken to a glass cutter or diatretarii. The latter would cut and carve away most of the glass leaving a transparent vessel inside and an open-work decoration separated through thin posts of glass. The work is very delicate and exclusive, produced within limited space in time with no record of similar vessels until the late 1800 (Donald B. Harden & Toynbee 1959, p.181). Many of these glass objects have good-will inscriptions or decorations that express the importance of drinking. As for their provenance, most –when found in context- have been found in pagan burials. Nevertheless some fragments have been found in Christian environments or with Christian motifs like the Szekszárd cup. The location of these finds is mostly in the Rhine area –northern Empire, when Milan was one of its capitals (Aquaro 2004)- but the actual extent of finds expand throughout the 4th century extent of the Roman Empire. Considering their typological analysis there are basically two types, beaker and bowl. Beakers are considered drinking vessels as they either display a legend or a mythological reference to drink or wine. Whereas a general consensus agrees that open bowl-form cups were hanging lamps (Whitehouse 1988, p.28) since the 1986 find of a diatreta bowl with copper alloy hanging attachments. It is clear these were luxury objects to be used in special occasions and spaces. The aim of this paper is to understand the space were socialisation and drinking took place and the importance of luxurious objects to adorn, display and use. The paper will also put forward the idea that the beaker shaped diatreta vessels, usually considered for drinking, could have been lamps that encouraged drinking and good will to the guests. This paper is structured to first consider an introduction to late luxury Roman glass and then analysing the typological shape of all, or most of the diatreta currently known; secondly, through assessment by the means of comparison, analyse the writings or decorations the vessels were endowed with. Thirdly, by describing and understanding the people and the space were these vessels would have been used, emphasise the beauty of illuminating such spaces with these vessels. According to Herodotus in his historical investigation –5th century-, dress habits and food regime are elements of extreme importance to understand a people (Caporusso et al. 2011, p.12). This idea is not only valid for Herodotus’ time but it is something anthropology uses time and again to explain different aspects in people’s way of life. Through food and its environment, the dining space, this paper will aim to put the cage cups into a social context in order to give emphasis to the hypothesis of light versus wine

The genetic architecture of the human cerebral cortex

INTRODUCTION The cerebral cortex underlies our complex cognitive capabilities. Variations in human cortical surface area and thickness are associated with neurological, psychological, and behavioral traits and can be measured in vivo by magnetic resonance imaging (MRI). Studies in model organisms have identified genes that influence cortical structure, but little is known about common genetic variants that affect human cortical structure. RATIONALE To identify genetic variants associated with human cortical structure at both global and regional levels, we conducted a genome-wide association meta-analysis of brain MRI data from 51,665 individuals across 60 cohorts. We analyzed the surface area and average thickness of the whole cortex and 34 cortical regions with known functional specializations. RESULTS We identified 306 nominally genome-wide significant loci (P < 5 × 10−8) associated with cortical structure in a discovery sample of 33,992 participants of European ancestry. Of the 299 loci for which replication data were available, 241 loci influencing surface area and 14 influencing thickness remained significant after replication, with 199 loci passing multiple testing correction (P < 8.3 × 10−10; 187 influencing surface area and 12 influencing thickness). Common genetic variants explained 34% (SE = 3%) of the variation in total surface area and 26% (SE = 2%) in average thickness; surface area and thickness showed a negative genetic correlation (rG = −0.32, SE = 0.05, P = 6.5 × 10−12), which suggests that genetic influences have opposing effects on surface area and thickness. Bioinformatic analyses showed that total surface area is influenced by genetic variants that alter gene regulatory activity in neural progenitor cells during fetal development. By contrast, average thickness is influenced by active regulatory elements in adult brain samples, which may reflect processes that occur after mid-fetal development, such as myelination, branching, or pruning. When considered together, these results support the radial unit hypothesis that different developmental mechanisms promote surface area expansion and increases in thickness. To identify specific genetic influences on individual cortical regions, we controlled for global measures (total surface area or average thickness) in the regional analyses. After multiple testing correction, we identified 175 loci that influence regional surface area and 10 that influence regional thickness. Loci that affect regional surface area cluster near genes involved in the Wnt signaling pathway, which is known to influence areal identity. We observed significant positive genetic correlations and evidence of bidirectional causation of total surface area with both general cognitive functioning and educational attainment. We found additional positive genetic correlations between total surface area and Parkinson’s disease but did not find evidence of causation. Negative genetic correlations were evident between total surface area and insomnia, attention deficit hyperactivity disorder, depressive symptoms, major depressive disorder, and neuroticism. CONCLUSION This large-scale collaborative work enhances our understanding of the genetic architecture of the human cerebral cortex and its regional patterning. The highly polygenic architecture of the cortex suggests that distinct genes are involved in the development of specific cortical areas. Moreover, we find evidence that brain structure is a key phenotype along the causal pathway that leads from genetic variation to differences in general cognitive function

Collider aspects of flavour physics at high Q

This review presents flavour related issues in the production and decays of heavy states at LHC, both from the experimental side and from the theoretical side. We review top quark physics and discuss flavour aspects of several extensions of the Standard Model, such as supersymmetry, little Higgs model or models with extra dimensions. This includes discovery aspects as well as measurement of several properties of these heavy states. We also present public available computational tools related to this topic.Comment: Report of Working Group 1 of the CERN Workshop ``Flavour in the era of the LHC'', Geneva, Switzerland, November 2005 -- March 200

Search for dark matter produced in association with a hadronically decaying vector boson in pp collisions at sqrt (s) = 13 TeV with the ATLAS detector

A search is presented for dark matter produced in association with a hadronically decaying W or Z boson using 3.2 fb−1 of pp collisions at View the MathML sources=13 TeV recorded by the ATLAS detector at the Large Hadron Collider. Events with a hadronic jet compatible with a W or Z boson and with large missing transverse momentum are analysed. The data are consistent with the Standard Model predictions and are interpreted in terms of both an effective field theory and a simplified model containing dark matter

Measurement of the cross section for isolated-photon plus jet production in pp collisions at √s=13 TeV using the ATLAS detector

The dynamics of isolated-photon production in association with a jet in proton–proton collisions at a centre-of-mass energy of 13 TeV are studied with the ATLAS detector at the LHC using a dataset with an integrated luminosity of 3.2 fb−1. Photons are required to have transverse energies above 125 GeV. Jets are identified using the anti- algorithm with radius parameter and required to have transverse momenta above 100 GeV. Measurements of isolated-photon plus jet cross sections are presented as functions of the leading-photon transverse energy, the leading-jet transverse momentum, the azimuthal angular separation between the photon and the jet, the photon–jet invariant mass and the scattering angle in the photon–jet centre-of-mass system. Tree-level plus parton-shower predictions from Sherpa and Pythia as well as next-to-leading-order QCD predictions from Jetphox and Sherpa are compared to the measurements

Search for high-mass new phenomena in the dilepton final state using proton–proton collisions at View the MathML sources=13TeV with the ATLAS detector

A search is conducted for both resonant and non-resonant high-mass new phenomena in dielectron and dimuon final states. The search uses View the MathML source3.2fb−1 of proton–proton collision data, collected at View the MathML sources=13TeV by the ATLAS experiment at the LHC in 2015. The dilepton invariant mass is used as the discriminating variable. No significant deviation from the Standard Model prediction is observed; therefore limits are set on the signal model parameters of interest at 95% credibility level. Upper limits are set on the cross-section times branching ratio for resonances decaying to dileptons, and the limits are converted into lower limits on the resonance mass, ranging between 2.74 TeV and 3.36 TeV, depending on the model. Lower limits on the ℓℓqqℓℓqq contact interaction scale are set between 16.7 TeV and 25.2 TeV, also depending on the mode

Search for leptophobic Z ' bosons decaying into four-lepton final states in proton-proton collisions at root s=8 TeV

Peer reviewe

Search for black holes and other new phenomena in high-multiplicity final states in proton-proton collisions at root s=13 TeV

Peer reviewe