Effect of applied magnetic field on the rectifying characteristics in self-doped La0.9MnO3/0.8 wt %Nb-SrTiO3 heteroepitaxial junctions

The epitaxial self-doped La0.9MnO3 thin film was deposited on a 0.8 wt %Nb-doped SrTiO3 substrate by pulse laser deposition method to form a bilayer p-n junction with an area of 8 mm2. The isothermal current-voltage loops measured from 10 to 380 K with an interval of 10 K in applied magnetic fields up to 7 T show typical temperature-dependent rectifying characteristic and asymmetrical hysteresis. The effect of magnetic field on the rectifying property is very small for the temperature above 150 K and a strong asymmetrical effect on the rectifying property below 150 K. In the low temperature region, although the diffusive voltage Vd is not affected by the applied magnetic field, the breakdown voltage Vb decreases with the increasing of magnetic field. At 10 K, the relative ratio of voltage [Vb(0)−Vb(7 T)]/Vb(0) is about 14%, showing a magnetically tunable property. These results reveal the great potential of the manganites in configuring artificial devices.published_or_final_versio

Revealing microstructural evolutions, mechanical properties and wear performance of wire arc additive manufacturing homogeneous and heterogeneous NiTi alloy

Heterogeneous microstructure designs have attracted a great deal of attention, not only because they have the potential to achieve an ideal combination of two conflicting properties, but also because the processes involved in their fabrication are cost-effective and can be scaled up for industrial production. The process parameters in the preparation process have an important effect on the microstructure and properties of alloy members prepared by wire arc additive manufacturing (WAAM) technology. It was expected that the spatial heterogeneous microstructure with large microstructural heterogeneities in metals can be formed through changing the process parameters. In this work, homogeneous NiTi thin-walled component and heterogeneous NiTi thin-walled component were fabricated using WAAM technology by adjusting the heat input. The effects of deposition height and heat input on the microstructure, mechanical properties and wear properties of WAAM NiTi alloys were investigated. The results show that grains were gradually refined with the increase of deposition height in the homogeneous WAAM NiTi component. The ultimate tensile strength of homogeneous WAAM NiTi component increased from 606.87 MPa to 654.45 MPa and the elongation increased from 12.72% to 15.38%, as the increase of deposition height. Moreover, the homogeneous WAAM NiTi component exhibited excellent wear resistance, the coefficient of friction decreased from 0.760 to 0.715 with the increase of deposition height. Meanwhile, the grains in the heterogeneous WAAM NiTi component shows the finest grains in the central region. The ultimate tensile strength of the lower region, middle region and upper region of heterogeneous WAAM NiTi components were 556.12 MPa, 599.53 MPa and 739.79 MPa, and the elongations were 12.98%, 16.69%, 21.74%, respectively. The coefficient of friction for the lower region, middle region and upper region of heterogeneous WAAM NiTi components were 0.713, 0.720 and 0.710, respectively. The microhardness and cyclic compression properties of the homogeneous components with higher heat input were better than those of the heterogeneous components for the same deposition height. The tensile yield strength, elongation and wear resistance of the heterogeneous components were superior compared to the homogeneous components. These results can be used to optimize the WAAM process parameters to prepare NiTi components with excellent mechanical properties

PH-Sensitive polymer matrix with immobilized indicator ion pairs

A new sensor material for monitoring pH in aqueous solutions is described. It is based on lipophilic ion pairs consisting of an anionic pH indicator Bromocresol Green and a quaternary ammonium cation cetyltrimethylammonium. The ion pairs are homogeneously distributed inside the plasticized PVC membrane. The change of pH in an aqueous solution causes the change of optical property of the indicator immobilized on the plasticized PVC membrane. The plasticized PVC membrane is sensitive in a pH range from 4.0 to 6.0

The lncRNA HOTAIR transcription is controlled by HNF4α-induced chromatin topology modulation

The expression of the long noncoding RNA HOTAIR (HOX Transcript Antisense Intergenic RNA) is largely deregulated in epithelial cancers and positively correlates with poor prognosis and progression of hepatocellular carcinoma and gastrointestinal cancers. Furthermore, functional studies revealed a pivotal role for HOTAIR in the epithelial-to-mesenchymal transition, as this RNA is causal for the repressive activity of the master factor SNAIL on epithelial genes. Despite the proven oncogenic role of HOTAIR, its transcriptional regulation is still poorly understood. Here hepatocyte nuclear factor 4-α (HNF4α), as inducer of epithelial differentiation, was demonstrated to directly repress HOTAIR transcription in the mesenchymal-to epithelial transition. Mechanistically, HNF4α was found to cause the release of a chromatin loop on HOTAIR regulatory elements thus exerting an enhancer-blocking activity

Loess plateau storage of northeastern Tibetan plateau-derived Yellow River sediment

Marine accumulations of terrigenous sediment are widely assumed to accurately record climatic- and tectonic-controlled mountain denudation and play an important role in understanding late Cenozoic mountain uplift and global cooling. Underpinning this is the assumption that the majority of sediment eroded from hinterland orogenic belts is transported to and ultimately stored in marine basins with little lag between erosion and deposition. Here we use a detailed and multi-technique sedimentary provenance dataset from the Yellow River to show that substantial amounts of sediment eroded from Northeast Tibet and carried by the river’s upper reach are stored in the Chinese Loess Plateau and the western Mu Us desert. This finding revises our understanding of the origin of the Chinese Loess Plateau and provides a potential solution for mismatches between late Cenozoic terrestrial sedimentation and marine geochemistry records, as well as between global CO2 and erosion records

Glassy State Lead Tellurite Nanobelts: Synthesis and Properties

The lead tellurite nanobelts have been first synthesized in the composite molten salts (KNO3/LiNO3) method, which is cost-effective, one-step, easy to control, and performed at low-temperature and in ambient atmosphere. Scanning electron microscopy, X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectrum, energy dispersive X-ray spectroscopy and FT-IR spectrum are used to characterize the structure, morphology, and composition of the samples. The results show that the as-synthesized products are amorphous and glassy nanobelts with widths of 200–300 nm and lengths up to tens of microns and the atomic ratio of Pb:Te:O is close to 1:1.5:4. Thermo-gravimetric analysis (TGA) and differential scanning calorimetry (DSC) and investigations of the corresponding structure and morphology change confirm that the nanobelts have low glass transition temperature and thermal stability. Optical diffuse reflectance spectrum indicates that the lead tellurite nanobelts have two optical gaps at ca. 3.72 eV and 4.12 eV. Photoluminescence (PL) spectrum and fluorescence imaging of the products exhibit a blue emission (round 480 nm)

The prevalence of hyperuricemia in China: a meta-analysis

<p>Abstract</p> <p>Background</p> <p>The prevalence of hyperuricemia varied in different populations and it appeared to be increasing in the past decades. Recent studies suggest that hyperuricemia is an independent risk factor for cardiovascular disease. However, there has not yet been a systematic analysis of the prevalence of hyperuricemia in China.</p> <p>Methods</p> <p>Epidemiological investigations on hyperuricemia in China published in journals were identified manually and on-line by using CBMDISC, Chongqing VIP database and CNKI database. Those Reported in English journals were identified using MEDLINE database. Selected studies had to describe an original study defined by strict screening and diagnostic criteria. The fixed effects model or random effects model was employed according to statistical test for homogeneity.</p> <p>Results</p> <p>Fifty-nine studies were selected, the statistical information of which was collected for systematic analysis. The results showed that the pooled prevalence of hyperuricemia in male was 21.6% (95%CI: 18.9%-24.6%), but it was only 8.6% (95%CI: 8.2%-10.2%) in female. It was found that thirty years was the risk point age in male and it was fifty years in female.</p> <p>Conclusions</p> <p>The prevalence of hyperuricemia is different as the period of age and it increases after 30 years in male and 50 in female. Interventions are necessary to change the risk factors before the key age which is 30 years in male and 50 in female.</p

Measurement of the Bottom-Strange Meson Mixing Phase in the Full CDF Data Set

We report a measurement of the bottom-strange meson mixing phase \beta_s using the time evolution of B0_s -> J/\psi (->\mu+\mu-) \phi (-> K+ K-) decays in which the quark-flavor content of the bottom-strange meson is identified at production. This measurement uses the full data set of proton-antiproton collisions at sqrt(s)= 1.96 TeV collected by the Collider Detector experiment at the Fermilab Tevatron, corresponding to 9.6 fb-1 of integrated luminosity. We report confidence regions in the two-dimensional space of \beta_s and the B0_s decay-width difference \Delta\Gamma_s, and measure \beta_s in [-\pi/2, -1.51] U [-0.06, 0.30] U [1.26, \pi/2] at the 68% confidence level, in agreement with the standard model expectation. Assuming the standard model value of \beta_s, we also determine \Delta\Gamma_s = 0.068 +- 0.026 (stat) +- 0.009 (syst) ps-1 and the mean B0_s lifetime, \tau_s = 1.528 +- 0.019 (stat) +- 0.009 (syst) ps, which are consistent and competitive with determinations by other experiments.Comment: 8 pages, 2 figures, Phys. Rev. Lett 109, 171802 (2012

Bioavailability of Orally Administered rhGM-CSF: A Single-Dose, Randomized, Open-Label, Two-Period Crossover Trial

BACKGROUND: Recombinant human granulocyte-macrophage colony-stimulating factor (rhGM-CSF) is usually administered by injection, and its oral administration in a clinical setting has been not yet reported. Here we demonstrate the bioavailability of orally administered rhGM-CSF in healthy volunteers. The rhGM-CSF was expressed in Bombyx mori expression system (BmrhGM-CSF). METHODS AND FINDINGS: Using a single-dose, randomized, open-label, two-period crossover clinical trial design, 19 healthy volunteers were orally administered with BmrhGM-CSF (8 microg/kg) and subcutaneously injected with rhGM-CSF (3.75 microg/kg) respectively. Serum samples were drawn at 0.0h, 0.5h ,0.75h,1.0h,1.5h,2.0h ,3.0h,4.0h,5.0h,6.0h,8.0h,10.0h and 12.0h after administrations. The hGM-CSF serum concentrations were determined by ELISA. The AUC was calculated using the trapezoid method. The relative bioavailability of BmrhGM-CSF was determined according to the AUC ratio of both orally administered and subcutaneously injected rhGM-CSF. Three volunteers were randomly selected from 15 orally administrated subjects with ELISA detectable values. Their serum samples at the 0.0h, 1.0h, 2.0h, 3.0h and 4.0h after the administrations were analyzed by Q-Trap MS/MS TOF. The different peaks were revealed by the spectrogram profile comparison of the 1.0h, 2.0h, 3.0h and 4.0h samples with that of the 0.0h sample, and further analyzed using both Enhanced Product Ion (EPI) scanning and Peptide Mass Fingerprinting Analysis. The rhGM-CSF was detected in the serum samples from 15 of 19 volunteers administrated with BmrhGM-CSF. Its bioavailability was observed at an average of 1.0%, with the highest of 3.1%. The rhGM-CSF peptide sequences in the serum samples were detected by MS analysis, and their sizes ranging from 2,039 to 7,336 Da. CONCLUSIONS: The results demonstrated that the oral administered BmrhGM-CSF was absorbed into the blood. This study provides an approach for an oral administration of rhGM-CSF protein in clinical settings. TRIAL REGISTRATION: www.chictr.orgChiCTR-TRC-00000107