Influence of Pacing Mode and Rate on Peripheral Levels of Atrial Natriuretic Peptide (ANP)

The effect of acute modifications of pacing mode and rate on plasma ANP levels was evaluated. ANP was determined in ten resting patients with ODD pacemokers due to binodal disease or intermittent second- and third-degree AV block. At 82/minute pacing rate the ANP plasma levels (normal range 2 to 30 fmol/mL) corresponded to those under AAI (4.05 ± 2.10 fmol/mL) and DDD (4.18 ± 2.02 fmol/mL) pacing, but increased significantly (P < 0.05) during VVI pacing (6.96 ± 3.70 fmol/mL). Acceleration of DDD stimulation frequency from 82 to 113/minutes led to significant increases of ANP levels by the factor of three in all chosen AV delays. The lowest ANP plasma levels were measured of 175 msec AV delay under 82/minute pacing rate in DDD mode. Under 113/minutes the differences of ANP concentration after variations of AV delays were less pronounced. The influences of altered atrial pressure and tension on ANP release are discussed to account for changes in ANP plasma levels following different modes and rates of pacemaker stimulation.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/75366/1/j.1540-8159.1989.tb01862.x.pd

The Antibacterial Activity of Honey Derived from Australian Flora

Chronic wound infections and antibiotic resistance are driving interest in antimicrobial treatments that have generally been considered complementary, including antimicrobially active honey. Australia has unique native flora and produces honey with a wide range of different physicochemical properties. In this study we surveyed 477 honey samples, derived from native and exotic plants from various regions of Australia, for their antibacterial activity using an established screening protocol. A level of activity considered potentially therapeutically useful was found in 274 (57%) of the honey samples, with exceptional activity seen in samples derived from marri (Corymbia calophylla), jarrah (Eucalyptus marginata) and jellybush (Leptospermum polygalifolium). In most cases the antibacterial activity was attributable to hydrogen peroxide produced by the bee-derived enzyme glucose oxidase. Non-hydrogen peroxide activity was detected in 80 (16.8%) samples, and was most consistently seen in honey produced from Leptospermum spp. Testing over time found the hydrogen peroxide-dependent activity in honey decreased, in some cases by 100%, and this activity was more stable at 4°C than at 25°C. In contrast, the non-hydrogen peroxide activity of Leptospermum honey samples increased, and this was greatest in samples stored at 25°C. The stability of non-peroxide activity from other honeys was more variable, suggesting this activity may have a different cause. We conclude that many Australian honeys have clinical potential, and that further studies into the composition and stability of their active constituents are warranted

Cyclic stretch increases splicing noise rate in cultured human fibroblasts

BACKGROUND: Mechanical forces are known to alter the expression of genes, but it has so far not been reported whether they may influence the fidelity of nucleus-based processes. One experimental approach permitting to address this question is the application of cyclic stretch to cultured human fibroblasts. As a marker for the precision of nucleus-based processes, the number of errors that occur during co-transcriptional splicing can then be measured. This so-called splicing noise is found at low frequency in pre-mRNA splicing. FINDINGS: The amount of splicing noise was measured by RT-qPCR of seven exon skips from the test genes AATF, MAP3K11, NF1, PCGF2, POLR2A and RABAC1. In cells treated by altered uniaxial cyclic stretching for 18 h, a uniform and significant increase of splicing noise was found for all detectable exon skips. CONCLUSION: Our data demonstrate that application of cyclic stretch to cultured fibroblasts correlates with a reduced transcriptional fidelity caused by increasing splicing noise

Measurement of the Bottom-Strange Meson Mixing Phase in the Full CDF Data Set

We report a measurement of the bottom-strange meson mixing phase \beta_s using the time evolution of B0_s -> J/\psi (->\mu+\mu-) \phi (-> K+ K-) decays in which the quark-flavor content of the bottom-strange meson is identified at production. This measurement uses the full data set of proton-antiproton collisions at sqrt(s)= 1.96 TeV collected by the Collider Detector experiment at the Fermilab Tevatron, corresponding to 9.6 fb-1 of integrated luminosity. We report confidence regions in the two-dimensional space of \beta_s and the B0_s decay-width difference \Delta\Gamma_s, and measure \beta_s in [-\pi/2, -1.51] U [-0.06, 0.30] U [1.26, \pi/2] at the 68% confidence level, in agreement with the standard model expectation. Assuming the standard model value of \beta_s, we also determine \Delta\Gamma_s = 0.068 +- 0.026 (stat) +- 0.009 (syst) ps-1 and the mean B0_s lifetime, \tau_s = 1.528 +- 0.019 (stat) +- 0.009 (syst) ps, which are consistent and competitive with determinations by other experiments.Comment: 8 pages, 2 figures, Phys. Rev. Lett 109, 171802 (2012

TbUNC119 and Its Binding Protein Complex Are Essential for Propagation, Motility, and Morphogenesis of Trypanosoma brucei Procyclic Form Cells

Flagellum-mediated motility of Trypanosoma brucei is considered to be essential for the parasite to complete stage development in the tsetse fly vector, while the mechanism by which flagellum-mediated motility is controlled are not fully understood. We thus compared T. brucei whole gene products (amino acid sequence) with Caenorhabditis elegans UNC (uncoordinated) proteins, in order to find uncharacterized motility-related T. brucei genes. Through in silico analysis, we found 88 gene products which were highly similar to C. elegans UNC proteins and categorized them as TbCEUN (T. brucei gene products which have high similarity to C. elegans UNC proteins). Approximately two thirds of the 88 TbCEUN gene products were kinesin-related molecules. A gene product highly similar to C. elegans UNC119 protein was designated as TbUNC119. RNAi-mediated depletion of TbUNC119 showed no apparent phenotype. However, knock-down analysis of both TbUNC119 and its binding protein (TbUNC119BP) which was found by yeast two-hybrid analysis showed characteristic phenotypes, including reduced motility, morphological change (extended cell shape), and cellular apoptosis. Based on the observed phenotypes, possible function of the TbUNC119 and TbUNC119BP is discussed

The stress-responsive kinase DYRK2 activates heat shock factor 1 promoting resistance to proteotoxic stress

To survive proteotoxic stress, cancer cells activate the proteotoxic-stress response pathway, which is controlled by the transcription factor heat shock factor 1 (HSF1). This pathway supports cancer initiation, cancer progression and chemoresistance and thus is an attractive therapeutic target. As developing inhibitors against transcriptional regulators, such as HSF1 is challenging, the identification and targeting of upstream regulators of HSF1 present a tractable alternative strategy. Here we demonstrate that in triple-negative breast cancer (TNBC) cells, the dual specificity tyrosine-regulated kinase 2 (DYRK2) phosphorylates HSF1, promoting its nuclear stability and transcriptional activity. DYRK2 depletion reduces HSF1 activity and sensitises TNBC cells to proteotoxic stress. Importantly, in tumours from TNBC patients, DYRK2 levels positively correlate with active HSF1 and associates with poor prognosis, suggesting that DYRK2 could be promoting TNBC. These findings identify DYRK2 as a key modulator of the HSF1 transcriptional programme and a potential therapeutic target

Multiple QTLs linked to agro-morphological and physiological traits related to drought tolerance in potato.

Dissection of the genetic architecture of adaptation and abiotic stress-related traits is highly desirable for developing drought-tolerant potatoes and enhancing the resilience of existing cultivars, particularly as agricultural production in rain-fed areas may be reduced by up to 50 % by 2020. The “DMDD” potato progeny was developed at International Potato Center (CIP) by crossing the sequenced double monoploid line DM and a diploid cultivar of the Solanum tuberosum diploid Andigenum Goniocalyx group. Recently, a high-density integrated genetic map based on single nucleotide polymorphism (SNP), diversity array technology (DArT), simple sequence repeats (SSRs), and amplified fragment length polymorphism (AFLP) markers was also made available for this population. Two trials were conducted, in greenhouse and field, for drought tolerance with two treatments each, well-watered and terminal drought, in which watering was suspended 60 days after planting. The DMDD population was evaluated for agro-morphological and physiological traits before and after initiation of stress, at multiple time points. Two dense parental genetic maps were constructed using published genotypic data, and quantitative trait locus (QTL) analysis identified 45 genomic regions associated with nine traits in well-watered and terminal drought treatments and 26 potentially associated with drought stress. In this study, the strong influence of environmental factors besides water shortage on the expression of traits and QTLs reflects the multigenic control of traits related to drought tolerance. This is the first study to our knowledge in potato identifying QTLs for drought-related traits in field and greenhouse trials, giving new insights into genetic architecture of drought-related traits. Many of the QTLs identified have the potential to be used in potato breeding programs for enhanced drought tolerance

Social media, rituals, and long-distance family relationship maintenance: a mixed-methods systematic review

For families with limited opportunities for face-to-face interaction, social media can be a vital communication medium to help shape the family identity, maintain bonds, and accomplish shared tasks. This mixed-methods systematic review of quantitative, qualitative, and mixed-method empirical studies published between 1997 and 2019, uses a convergent data-based framework to explore how long-distance families engage in family practices using various modes of social media. Fifty-one papers were synthesised into four domains: (1) doing family in a social media environment, (2) performing family through stories and rituals, (3) the nature of online communication practices, and (4) privacy, conflict, and the quality of family relationships. Given the value of patterned routines to families, research into the role of family kinkeepers is suggested. Finally, families use chat (messages) extensively for both assuring behaviour and conflict resolution so further investigation of the impact of this asynchronous mode is recommended

Surface pretreatments for medical application of adhesion

Medical implants and prostheses (artificial hips, tendono- and ligament plasties) usually are multi-component systems that may be machined from one of three material classes: metals, plastics and ceramics. Typically, the body-sided bonding element is bone. The purpose of this contribution is to describe developments carried out to optimize the techniques , connecting prosthesis to bone, to be joined by an adhesive bone cement at their interface. Although bonding of organic polymers to inorganic or organic surfaces and to bone has a long history, there remains a serious obstacle in realizing long-term high-bonding strengths in the in vivo body environment of ever present high humidity. Therefore, different pretreatments, individually adapted to the actual combination of materials, are needed to assure long term adhesive strength and stability against hydrolysis. This pretreatment for metal alloys may be silica layering; for PE-plastics, a specific plasma activation; and for bone, amphiphilic layering systems such that the hydrophilic properties of bone become better adapted to the hydrophobic properties of the bone cement. Amphiphilic layering systems are related to those developed in dentistry for dentine bonding. Specific pretreatment can significantly increase bond strengths, particularly after long term immersion in water under conditions similar to those in the human body. The bond strength between bone and plastic for example can be increased by a factor approaching 50 (pealing work increasing from 30 N/m to 1500 N/m). This review article summarizes the multi-disciplined subject of adhesion and adhesives, considering the technology involved in the formation and mechanical performance of adhesives joints inside the human body