67 research outputs found
withdrawn 2017 hrs ehra ecas aphrs solaece expert consensus statement on catheter and surgical ablation of atrial fibrillation
n/
Electrospun green fibres from lignin and chitosan: a novel polycomplexation process for the production of lignin-based fibres
3D printing in upcycling plastic and biomass waste to sustainable polymer blends and composites: A review
Mishandling of waste plastics and biomasses is a major global concern. Every year, around 380 million tonnes of plastic are produced, with only 9% being recycled, leading to widespread pollution. Similarly, waste biomass generation from agricultural and forestry sectors accounts for 140 billion metric tonnes, in addition to 2.01 billion tonnes from municipal solid waste. This review paper addresses the gap regarding the integration of 3D printing, upcycling of recycled plastics, and the utilization of waste biomass in sustainable composites. 3D printed parts from recycled plastic have shown comparable mechanical properties compared to virgin materials, which have been further improved by the addition of waste biomass-derived fillers. The paper acknowledges that different printing parameters have substantial influence on the strength, ductility, crystallinity, and dimensional accuracy of printed parts. Therefore, optimizing these parameters becomes crucial for achieving improved mechanical performance. Moreover, incorporating reinforcing agents, stabilizers, chain extenders, compatibilizers, and surface modifiers in plastic recycling and 3D printing presents an excellent opportunity to enhance mechanical properties, thermal stability, adhesion, and dimensional stability. Additionally, the review identifies research gaps and proposes the integration of machine learning and artificial intelligence for enhanced process control and material development, further expanding the possibilities in this field
Super Toughened Poly(lactic acid)-Based Ternary Blends via Enhancing Interfacial Compatibility
Novel
super toughened bioplastics are developed through controlled
reactive extrusion processing, using a very low content of modifier,
truly a new discovery in the biodegradable plastics area. The super
toughened polylactide (PLA) blend showing a notched impact strength
of ∼1000 J/m with hinge break behavior is achieved at a designed
blending ratio of PLA, polyÂ(butylene succinate) (PBS), and polyÂ(butylene
adipate-co-terephthalate) (PBAT), using less than
0.5 phr peroxide modifier. The impact strength of the resulting blend
is approximately 10 times that of the blend with the same composition
without a modifier and ∼3000% more than that of pure PLA. Interfacial
compatibilization among the three biodegradable plastics took place
during the melt extrusion process in the presence of a controlled
amount of initiator, which is confirmed by scanning electron microscopy
and rheology analysis. The synergistic effect of strong interfacial
adhesion among the three blending components, the decreased particle
size of the most toughened component, PBAT, to ∼200 nm, and
its uniform distribution in the blend morphology result in the super
tough biobased material. One of the key fundamental findings through
the in situ rheology study depicts that the radical reaction initiated
by peroxide occurs mainly between PBS and PBAT and not with PLA. Thus,
the cross-linking degree can be controlled by adjusting renewable
sourced PLA contents in the ternary blend during reactive extrusion
processing. The newly engineered super toughened PLA with high stiffness
and high melt elasticity modulus could reasonably serve as a promising
alternative to traditional petroleum plastics, where high biobased
content and biodegradability are required in diverse sustainable packaging
uses
Alkali and Peroxide Bleach Treatments on Spring Harvested Switchgrass for Potential Composite Application
Natural fibers are desirable in composite applications for their sustainability. However, improving upon the interfacial adhesion between the fiber and matrix is a major challenge. Chemical surface modification is a method used to improve compatibility of the fiber by exposing or adding functionalities to the surface, and removing non-cellulosic components in order to enhance mechanical and thermal properties. Switchgrass, an abundant natural fiber, has potential for use as a reinforcing material in composite applications. Surface modifications were conducted on switchgrass via alkali and peroxide bleaching treatments in order to remove surface impurities and create a rougher surface, as observed in scanning electron micrographs. Fourier transform infrared spectroscopy and compositional analysis showed that non-cellulosic components were reduced following the alkali and bleach treatments. Reduction of hemicellulose and lignin improved thermal stability by increasing the onset temperature of degradation from 258 °C to 289 and 281 °C for alkali and bleach treatments, respectively. The crystallinity index (CI) of untreated and treated fibers was calculated from x-ray diffraction analyses. An increase of 48% and 38% for the alkali and bleach treated fibers, respectively, was seen in the CI, compared to the untreated switchgrass. The surface of switchgrass was successfully modified using alkali and peroxide bleach treatments for composite applications
Biocomposites with Size-Fractionated Biocarbon: Influence of the Microstructure on Macroscopic Properties
Electrospinning Process and Structure Relationship of Biobased Poly(butylene succinate) for Nanoporous Fibers
- …