Electrical stimulation of cardiac adipose tissue-derived progenitor cells modulates cell phenotype and genetic machinery

A major challenge of cardiac tissue engineering is directing cells to establish the physiological structure and function of the myocardium being replaced. Our aim was to examine the effect of electrical stimulation on the cardiodifferentiation potential of cardiac adipose tissue-derived progenitor cells (cardiac ATDPCs). Three different electrical stimulation protocols were tested; the selected protocol consisted of 2ms monophasic square-wave pulses of 50mV/cm at 1Hz over 14days. Cardiac and subcutaneous ATDPCs were grown on biocompatible patterned surfaces. Cardiomyogenic differentiation was examined by real-time PCR and immunocytofluorescence. In cardiac ATDPCs, MEF2A and GATA-4 were significantly upregulated at day 14 after stimulation, while subcutaneous ATDPCs only exhibited increased Cx43 expression. In response to electrical stimulation, cardiac ATDPCs elongated, and both cardiac and subcutaneous ATDPCs became aligned following the linear surface pattern of the construct. Cardiac ATDPC length increased by 11.3%, while subcutaneous ATDPC length diminished by 11.2% (p=0.013 and p=0.030 vs unstimulated controls, respectively). Compared to controls, electrostimulated cells became aligned better to the patterned surfaces when the pattern was perpendicular to the electric field (89.71±28.47o for cardiac ATDPCs and 92.15±15.21o for subcutaneous ATDPCs). Electrical stimulation of cardiac ATDPCs caused changes in cell phenotype and genetic machinery, making them more suitable for cardiac regeneration approaches. Thus, it seems advisable to use electrical cell training before delivery as a cell suspension or within engineered tissue.Peer ReviewedPreprin

Procalcitonin levels in acute exacerbation of COPD admitted in ICU: a prospective cohort study

<p>Abstract</p> <p>Background</p> <p>Antibiotics are recommended for severe acute exacerbation of chronic obstructive pulmonary disease (AECOPD) admitted to intensive care units (ICU). Serum procalcitonin (PCT) could be a useful tool for selecting patients with a lower probability of developing bacterial infection, but its measurement has not been investigated in this population.</p> <p>Methods</p> <p>We conducted a single center prospective cohort study in consecutive COPD patients admitted to the ICU for AECOPD between September 2005 and September 2006. Sputum samples or tracheal aspirates were tested for the presence of bacteria and viruses. PCT levels were measured at the time of admittance, six hours, and 24 hours using a sensitive immunoassay.</p> <p>Results</p> <p>Thirty nine AECOPD patients were included, 31 of which (79%) required a ventilator support at admission. The median [25%–75% interquartile range] PCT level, assessed in 35/39 patients, was: 0.096 μg/L [IQR, 0.065 to 0.178] at the time of admission, 0.113 μg/L [IQR, 0.074 to 0.548] at six hours, and 0.137 μg/L [IQR, 0.088 to 0.252] at 24 hours. The highest PCT (PCTmax) levels were less than 0.1 μg/L in 14/35 (40%) patients and more than 0.25 μg/L in 10/35 (29%) patients, suggesting low and high probability of bacterial infection, respectively. Five species of bacteria and nine species of viruses were detected in 12/39 (31%) patients. Among the four patients positive for <it>Pseudomonas aeruginosa</it>, one had a PCTmax less than 0.25 μg/L and three had a PCTmax less than 0.1 μg/L. The one patient positive for <it>Haemophilus influenzae </it>had a PCTmax more than 0.25 μg/L. The presence or absence of viruses did not influence PCT at time of admission (0.068 vs 0.098 μg/L respectively, <it>P </it>= 0.80).</p> <p>Conclusion</p> <p>The likelihood of bacterial infection is low among COPD patients admitted to ICU for AECOPD (40% with PCT < 0.1 μg/L) suggesting a possible inappropriate use of antibiotics. Further studies are necessary to assess the impact of a procalcitonin-based therapeutic strategy in critically ill COPD patients.</p

Analysis of the impact of length of stay on the quality of service experience, satisfaction and loyalty

Although length of stay is a relevant variable in destination management, little research has been produced connecting it with tourists' post-consumption behaviour. This research compares the post-consumption behaviour of same-day visitors with overnight tourists in a sample of 398 domestic vacationers at two Mediterranean heritage-and-beach destinations. Although economic research on length of stay posits that there are destination benefits in longer stays, same-day visitors score higher in most of the post-consumption variables under study. Significant differences arise in hedonic aspects of the tourist experience and destination loyalty. Thus, we propose that length of stay can be used as a segmentation variable. Furthermore, destination management organisations need to consider length of stay when designing tourism policies. The tourist product and communication strategies might be adapted to different vacation durations

Electrical stimulation of cardiac adipose tissue-derived progenitor cells modulates cell phenotype and genetic machinery

A major challenge of cardiac tissue engineering is directing cells to establish the physiological structure and function of the myocardium being replaced. Our aim was to examine the effect of electrical stimulation on the cardiodifferentiation potential of cardiac adipose tissue-derived progenitor cells (cardiac ATDPCs). Three different electrical stimulation protocols were tested; the selected protocol consisted of 2 ms monophasic square-wave pulses of 50 mV/cm at 1 Hz over 14 days. Cardiac and subcutaneous ATDPCs were grown on biocompatible patterned surfaces. Cardiomyogenic differentiation was examined by real-time PCR and immunocytofluorescence. In cardiac ATDPCs, MEF2A and GATA-4 were significantly upregulated at day 14 after stimulation, while subcutaneous ATDPCs only exhibited increased Cx43 expression. In response to electrical stimulation, cardiac ATDPCs elongated, and both cardiac and subcutaneous ATDPCs became aligned following the linear surface pattern of the construct. Cardiac ATDPC length increased by 11.3%, while subcutaneous ATDPC length diminished by 11.2% (p = 0.013 and p = 0.030 vs unstimulated controls, respectively). Compared to controls, electrostimulated cells became aligned better to the patterned surfaces when the pattern was perpendicular to the electric field (89.71 ± 28.47º for cardiac ATDPCs and 92.15 ± 15.21º for subcutaneous ATDPCs). Electrical stimulation of cardiac ATDPCs caused changes in cell phenotype and genetic machinery, making them more suitable for cardiac regeneration approaches. Thus, it seems advisable to use electrical cell training before delivery as a cell suspension or within engineered tissue

Electrical stimulation of cardiac adipose tissue-derived progenitor cells modulates cell phenotype and genetic machinery

A major challenge of cardiac tissue engineering is directing cells to establish the physiological structure and function of the myocardium being replaced. Our aim was to examine the effect of electrical stimulation on the cardiodifferentiation potential of cardiac adipose tissue-derived progenitor cells (cardiac ATDPCs). Three different electrical stimulation protocols were tested; the selected protocol consisted of 2ms monophasic square-wave pulses of 50mV/cm at 1Hz over 14days. Cardiac and subcutaneous ATDPCs were grown on biocompatible patterned surfaces. Cardiomyogenic differentiation was examined by real-time PCR and immunocytofluorescence. In cardiac ATDPCs, MEF2A and GATA-4 were significantly upregulated at day 14 after stimulation, while subcutaneous ATDPCs only exhibited increased Cx43 expression. In response to electrical stimulation, cardiac ATDPCs elongated, and both cardiac and subcutaneous ATDPCs became aligned following the linear surface pattern of the construct. Cardiac ATDPC length increased by 11.3%, while subcutaneous ATDPC length diminished by 11.2% (p=0.013 and p=0.030 vs unstimulated controls, respectively). Compared to controls, electrostimulated cells became aligned better to the patterned surfaces when the pattern was perpendicular to the electric field (89.71±28.47o for cardiac ATDPCs and 92.15±15.21o for subcutaneous ATDPCs). Electrical stimulation of cardiac ATDPCs caused changes in cell phenotype and genetic machinery, making them more suitable for cardiac regeneration approaches. Thus, it seems advisable to use electrical cell training before delivery as a cell suspension or within engineered tissue.Peer Reviewe

Numerical approach for the sensitivity of a high-frequency magnetic induction tomography system based on boundary elements and perturbation method

Magnetic induction tomography (MIT) is an imaging technique based on the measurement of the magnetic field perturbation due to eddy currents induced in conducting objects exposed to an external magnetic excitation field. In MIT, current-carrying coils are used to induce eddy currents in the object and the induced voltages are sensed with the receiving coils. When the driving frequency is significantly high relative to the frequency range in which MIT normally operates, metallic targets with high conductivity between the coils can be treated as perfect electric conductors (PEC) with negligible errors. In this scenario, the penetration depth of the magnetic field into the target is extremely small and the traditional versions of the finite element method (FEM) are not efficient for the calculation of the sensitivity and the forward problem due to the requirement for large number of elements to reach an acceptable computational precision. Other versions of FEMs (such as Hp-FEM), which have higher discretization efficiency and more advanced elements to satisfy the requirement, are exceptions. Nevertheless, the discretization regions for all FEMs have to extend beyond the region that contains the conducting object and volumetric elements are generally required for 3D problems. In contrast, the boundary element method (BEM) based on integral formulations becomes an effective way to analyze this kind of scattering problem since meshes are only required on the surface of the object. By point collocation, the boundary integral equations can be transformed into linear equations. Numerical methods are used to solve the linear equations and the solution of the original integral equations can be obtained. In this paper, we compute four typical sensitivity maps between the coil pairs in high-frequency MIT system due to a PEC perturbation. The magnetic scalar potential is used to improve the efficiency. Five PEC objects of different shapes are used in the simulation. The results have been compared with the experimental results and that obtained from the H·H formulations. We can know that the sensitivity maps derived by BEM are in good agreement with that from the experiment and theoretical solution. Overall, BEM is an effective way to calculate the sensitivity distributions of a high-frequency MIT system. © 2013 IOP Publishing Ltd