Global Interventions for Seismic Upgrading of Substandard RC Buildings

A methodology is developed in this paper for the design and proportioning of interventions for seismic upgrading of substandardreinforced-concrete (RC) buildings. The retrofit approach is presented in the form of a simple design tool that aims toward both demand reduction and enhancement of force and deformation supply through controlled modification of stiffness along the height of the building. This objective is achieved by engineering the translational mode-shape of the structure, so as to optimize the distribution of interstory drift. Resultsfrom the proposed approach are summarized in a spectrum format in which demand, expressed in terms of interstory drift, is related to stiffness. Design charts, which relate the characteristics of commonly used global intervention procedures to influence drift demands, are developed to facilitate the retrofit design. The intervention procedures considered in this paper are reinforced-concrete jacketing, the addition of reinforced concrete walls, and the addition of masonry infills. The proposed methodology is also amenable to adaptation to other strengthening methods, such as the addition of cross-bracing

Cardiovascular diseases and air pollution in Novi Sad, Serbia

Objectives: A large body of evidence has documented that air pollutants have adverse effect on human health as well as on the environment. The aim of this study was to determine whether there was an association between outdoor concentrations of sulfur dioxide (SO2) and nitrogen dioxide (NO2) and a daily number of hospital admissions due to cardiovascular diseases (CVD) in Novi Sad, Serbia among patients aged above 18. Material and Methods: The investigation was carried out during over a 3-year period (from January 1, 2007 to December 31, 2009) in the area of Novi Sad. The number (N = 10 469) of daily CVD (ICD-10: I00-I99) hospital admissions was collected according to patients' addresses. Daily mean levels of NO2 and SO2, measured in the ambient air of Novi Sad via a network of fixed samplers, have been used to put forward outdoor air pollution. Associations between air pollutants and hospital admissions were firstly analyzed by the use of the linear regression in a single polluted model, and then trough a single and multi-polluted adjusted generalized linear Poisson model. Results: The single polluted model (without confounding factors) indicated that there was a linear increase in the number of hospital admissions due to CVD in relation to the linear increase in concentrations of SO2 (p = 0.015; 95% confidence interval (95% CI): 0.144-1.329, R2 = 0.005) and NO2 (p = 0.007; 95% CI: 0.214-1.361, R2 = 0.007). However, the single and multi-polluted adjusted models revealed that only NO2 was associated with the CVD (p = 0.016, relative risk (RR) = 1.049, 95% CI: 1.009-1.091 and p = 0.022, RR = 1.047, 95% CI: 1.007-1.089, respectively). Conclusions: This study shows a significant positive association between hospital admissions due to CVD and outdoor NO2 concentrations in the area of Novi Sad, Serbia

The p25 subunit of the dynactin complex is required for dynein–early endosome interaction

The p25 subunit of the dynactin complex is required for the interaction between cytoplasmic dynein and early endosomes but is not required for dynein-mediated nuclear distribution

Guidelines for the use and interpretation of assays for monitoring autophagy (3rd edition)

In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. For example, a key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process versus those that measure fl ux through the autophagy pathway (i.e., the complete process including the amount and rate of cargo sequestered and degraded). In particular, a block in macroautophagy that results in autophagosome accumulation must be differentiated from stimuli that increase autophagic activity, defi ned as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (inmost higher eukaryotes and some protists such as Dictyostelium ) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the fi eld understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. It is worth emphasizing here that lysosomal digestion is a stage of autophagy and evaluating its competence is a crucial part of the evaluation of autophagic flux, or complete autophagy. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. Along these lines, because of the potential for pleiotropic effects due to blocking autophagy through genetic manipulation it is imperative to delete or knock down more than one autophagy-related gene. In addition, some individual Atg proteins, or groups of proteins, are involved in other cellular pathways so not all Atg proteins can be used as a specific marker for an autophagic process. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field

Secondary Metabolites of Marine Microbes: From Natural Products Chemistry to Chemical Ecology

Marine natural products (MNPs) exhibit a wide range of pharmaceutically relevant bioactivities, including antibiotic, antiviral, anticancer, or anti-inflammatory properties. Besides marine macroorganisms such as sponges, algae, or corals, specifically marine bacteria and fungi have shown to produce novel secondary metabolites (SMs) with unique and diverse chemical structures that may hold the key for the development of novel drugs or drug leads. Apart from highlighting their potential benefit to humankind, this review is focusing on the manifold functions of SMs in the marine ecosystem. For example, potent MNPs have the ability to exile predators and competing organisms, act as attractants for mating purposes, or serve as dye for the expulsion or attraction of other organisms. A large compilation of literature on the role of MNPs in marine ecology is available, and several reviews evaluated the function of MNPs for the aforementioned topics. Therefore, we focused the second part of this review on the importance of bioactive compounds from crustose coralline algae (CCA) and their role during coral settlement, a topic that has received less attention. It has been shown that certain SMs derived from CCA and their associated bacteria are able to induce attachment and/or metamorphosis of many benthic invertebrate larvae, including globally threatened reef-building scleractinian corals. This review provides an overview on bioactivities of MNPs from marine microbes and their potential use in medicine as well as on the latest findings of the chemical ecology and settlement process of scleractinian corals and other invertebrate larvae

An experimental and analytical investigation of reinforced concrete beam-column joints strengthened with a range of CFRP schemes applied only to the beam

This paper investigates the experimental and analytical behaviour of beam-column joints that are subjected to a combination of torque, flexural and direct shear forces, where different Carbon Fibre Polymer (CFRP) strengthening wraps have been applied only to the beam. These wrapping schemes have previously been determined by the research community as an effective method of enhancing the torsional capacities of simply supported reinforced concrete beams. In this investigation, four 3/4-scale exterior beam-column joints were subjected to combined monotonic loading; three different beam wrapping schemes were employed to strengthen the beam region of the joint. The paper suggests a series of rational formulae, based on the space truss mechanism, which can be used to evaluate the joint shear demand of the beams wrapped in these various ways. Further, an iterative model, based on the average stress-strain method, has been introduced to predict joint strength. The proposed analytical approaches show good agreement with the experimental results. The experimental outcomes along with the adopted analytical methods reflect the consistent influence of the wrapping ratio, the interaction between the combined forces, the concrete strut capacity and the fibre orientation on the joint forces, the failure mode and the distortion levels. A large rise in the strut force resulting from shear stresses generated from this combination of forces is demonstrated and leads to a sudden-brittle failure. Likewise, increases in the beams’ main steel rebar strains are identified at the column face, again influenced by the load interactions and the wrapping systems used