Comparison of meat quality characteristics and oxidative stability between conventional and free-range chickens

The aim of this research was to evaluate quality traits and oxidative stability of meat products from free range (FR) and conventionally (C) raised chickens as they actually reach consumers in the Italian retail market. FR female and male chickens (n=1500 + 1500), medium growing Isa strain, were raised under commercial conditions for 56 (1.8 kg of live wt.) and 70 d (3.1 kg of live wt.), respectively; C female and male birds (n=5000 + 5000) were a fast growing hybrid (Ross 708) and were separately raised for 39 (1.9 kg of live wt.) and 50 d (3.1 kg of live wt.), respectively. A total of 96 chickens (equally divided by production system and sex) were slaughtered into 2 separate sessions, to obtain the main two commercial categories (rotisserie and cut-up, respectively). After slaughtering, 12 carcasses of each treatment group were randomly selected and used to assess quality properties, chemical composition and oxidation stability of breast and leg meat. C birds had dramatic higher carcass and breast meat yield, whereas FR had higher wing and leg yields. FR birds exhibited higher water holding capacity in both breast and leg meat. Although shear force did not differ in breast meat, legs from FR birds were tougher. Fatty acid composition of FR breast and thigh meat of both categories were characterized by a higher PUFA n-6-/n-3 ratio. In general, a low lipid oxidation level (peroxide value (PV) < 1.3 meq O2/kg of lipid and thiobarbituric acid reactive substances (TBARs) < 0.2 mg MDA/kg of sample) was found in breast and legs, regardless of the commercial category. However, the C system significantly increased PV in rotisserie thigh meat, whereas FR led to a significantly higher TBARs in breast meat. Our results demonstrated that free range can modify the properties of chicken meat and also highlighted the importance of the animal genetic background to select nutritional strategies to improve meat quality traits and oxidative stability in poultry

Levels of phytosterol oxides in enriched and nonenriched spreads: application of a thin-layer chromatography-gas chromatography methodology

The content of phytosterol oxidation products (POPs) in enriched and nonenriched commercial spreads was evaluated by thin-layer chromatography-gas chromatography (TLC-GC). Oxides of beta-sitosterol, campesterol, and stigmasterol were produced by thermo-oxidation (7-hydroxy, 7-keto, and epoxy derivatives) and chemical synthesis (triol derivatives), which were then separated and identified by TLC-GC. Their identification was further confirmed by GC-mass spectrometry (GC-MS). The total amounts of phytosterols found were 6.07 and 0.33 g/100 g of sample in phytosterol-enriched and nonenriched spread, respectively, whereas the total POPs contents were 45.60 and 13.31 mg/kg of sample in the enriched and nonenriched products. The main POPs found were the 7-keto derivatives of all phytosterols analyzed; 7-ketositosterol was the most abundant one (14.96 and 5.93 mg/kg of sample in phytosterol-enriched and nonenriched spread). No beta-epoxy and triol derivatives were detected in both types of samples. The enriched spread presented a lower phytosterol oxidation rate (0.07%) than the nonenriched one (0.41%)

Thermo-oxidation of cholesterol: effect of the unsaturation degree of the lipid matrix

The influence of the unsaturation degree of different triacylglycerols (tristearin, triolein, trilinolein and trilinolenin) on cholesterol oxidation at 180 °C, was evaluated. Cholesterol degraded faster when heated alone than in the presence of triacylglycerols; moreover, the more unsaturated the matrix, the slower the degradation of cholesterol. Both cholesterol and triacylglycerols degradation fit a first order kinetic model (R(2)>0.9), except for the tristearin sample. Cholesterol oxidation products (COPs) and peroxides were formed during the heating treatment. The presence of any type of lipid matrix postponed and decreased the maximum concentration of both oxidation parameters. Maximum total COPs concentrations were achieved at 20 min in neat cholesterol, 120 min in tristearin and triolein and 180 min in polyunsaturated matrix samples. 7-Ketocholesterol was the main COP in most cases during the whole heating treatment. Both the presence of triacylglycerols and their unsaturation degree inhibited cholesterol thermooxidation at 180 °C

Evolution of the use of corticosteroids for the treatment of hospitalised COVID-19 patients in Spain between March and November 2020: SEMI-COVID national registry

Objectives: Since the results of the RECOVERY trial, WHO recommendations about the use of corticosteroids (CTs) in COVID-19 have changed. The aim of the study is to analyse the evolutive use of CTs in Spain during the pandemic to assess the potential influence of new recommendations. Material and methods: A retrospective, descriptive, and observational study was conducted on adults hospitalised due to COVID-19 in Spain who were included in the SEMI-COVID- 19 Registry from March to November 2020. Results: CTs were used in 6053 (36.21%) of the included patients. The patients were older (mean (SD)) (69.6 (14.6) vs. 66.0 (16.8) years; p < 0.001), with hypertension (57.0% vs. 47.7%; p < 0.001), obesity (26.4% vs. 19.3%; p < 0.0001), and multimorbidity prevalence (20.6% vs. 16.1%; p < 0.001). These patients had higher values (mean (95% CI)) of C-reactive protein (CRP) (86 (32.7-160) vs. 49.3 (16-109) mg/dL; p < 0.001), ferritin (791 (393-1534) vs. 470 (236- 996) µg/dL; p < 0.001), D dimer (750 (430-1400) vs. 617 (345-1180) µg/dL; p < 0.001), and lower Sp02/Fi02 (266 (91.1) vs. 301 (101); p < 0.001). Since June 2020, there was an increment in the use of CTs (March vs. September; p < 0.001). Overall, 20% did not receive steroids, and 40% received less than 200 mg accumulated prednisone equivalent dose (APED). Severe patients are treated with higher doses. The mortality benefit was observed in patients with oxygen saturation </=90%. Conclusions: Patients with greater comorbidity, severity, and inflammatory markers were those treated with CTs. In severe patients, there is a trend towards the use of higher doses. The mortality benefit was observed in patients with oxygen saturation </=90%

Measurement of the cross section for isolated-photon plus jet production in pp collisions at √s=13 TeV using the ATLAS detector

The dynamics of isolated-photon production in association with a jet in proton–proton collisions at a centre-of-mass energy of 13 TeV are studied with the ATLAS detector at the LHC using a dataset with an integrated luminosity of 3.2 fb−1. Photons are required to have transverse energies above 125 GeV. Jets are identified using the anti- algorithm with radius parameter and required to have transverse momenta above 100 GeV. Measurements of isolated-photon plus jet cross sections are presented as functions of the leading-photon transverse energy, the leading-jet transverse momentum, the azimuthal angular separation between the photon and the jet, the photon–jet invariant mass and the scattering angle in the photon–jet centre-of-mass system. Tree-level plus parton-shower predictions from Sherpa and Pythia as well as next-to-leading-order QCD predictions from Jetphox and Sherpa are compared to the measurements

A search for resonances decaying into a Higgs boson and a new particle X in the XH → qqbb final state with the ATLAS detector

A search for heavy resonances decaying into a Higgs boson (H) and a new particle (X) is reported, utilizing 36.1 fb−1 of proton–proton collision data at collected during 2015 and 2016 with the ATLAS detector at the CERN Large Hadron Collider. The particle X is assumed to decay to a pair of light quarks, and the fully hadronic final state is analysed. The search considers the regime of high XH resonance masses, where the X and H bosons are both highly Lorentz-boosted and are each reconstructed using a single jet with large radius parameter. A two-dimensional phase space of XH mass versus X mass is scanned for evidence of a signal, over a range of XH resonance mass values between 1 TeV and 4 TeV, and for X particles with masses from 50 GeV to 1000 GeV. All search results are consistent with the expectations for the background due to Standard Model processes, and 95% CL upper limits are set, as a function of XH and X masses, on the production cross-section of the resonance

Search for leptophobic Z ' bosons decaying into four-lepton final states in proton-proton collisions at root s=8 TeV

Peer reviewe

Search for black holes and other new phenomena in high-multiplicity final states in proton-proton collisions at root s=13 TeV

Peer reviewe

Measurements of differential production cross sections for a Z boson in association with jets in pp collisions at root s=8 TeV

Peer reviewe

Search for high-mass diphoton resonances in proton-proton collisions at 13 TeV and combination with 8 TeV search

Peer reviewe