1,072 research outputs found

    Fluorescence based real time monitoring of fouling in process chromatography

    Get PDF
    A real time monitoring of fouling in liquid chromatography has been presented. The versatility of the approach has been proven by successful implementation in three case studies with an error <1%. The first application demonstrates the monitoring of protein A ligand density and foulant concentration for assessing performance of protein A chromatography resin during purification of monoclonal antibodies. The observations have been supported from LC-MS/MS studies that were independently performed. The second application involves monitoring of foulant deposition during multimode cation exchange chromatography based purification of human serum albumin. Finally, in the third application, monitoring of foulants during multimodal hydrophobic interaction chromatography of recombinant human granulocyte colony stimulating factor is demonstrated. In all three cases, it is observed that the fluorescence intensity consistently increases with resin reuse as more foulants are deposited over time. The proposed approach can be readily used for real time monitoring of fouling and process control

    Effect of Zinc Supplementation on Growth of Low Birth Weight Infants Aged 1–6 Mo in Ardabil, Iran

    Get PDF
    Objective To assess the effect of zinc supplementation on growth of low birth weight (LBW) infants aged 1–6 mo. Methods LBW infants were enrolled at birth and randomly assigned to receive 5 mg elemental Zn per day (n=45) or placebo (n=45) until 6 mo of age. They were followed monthly for information on compliance; anthropometric measurements were performed monthly. Results After randomization, 5 infants from zinc group and 9 from placebo group were excluded. At 6 mo of age, significantly greater weight gains were observed in the zinc than in the placebo group (4995±741g in zinc group vs. 3896±865 g in placebo group, p = 0.036). Length gain during the study period improved in zinc group (16.9±8.2 cm vs. 15.1±4.1 cm, p = 0.039); after zinc supplementation head circumference were increased (8.7±1.4 cm vs.7.4± 1.5 cm p<0.001). In male infants, total weight gain and height and head circumference gain were higher in the zinc than in the placebo group. However, only head circumference change was statistically significant. A similar trend was observed among female infants, but these differences were not statistically significant. There was no significant relation between breast-feeding status and the main outcome variables. Conclusions Infants in the present study showed improve¬ments in growth rate, but more studies are required in this field to confirm this fact

    Living GenoChemetics by hyphenating synthetic biology and synthetic chemistry in vivo

    Get PDF
    Marrying synthetic biology with synthetic chemistry provides a powerful approach toward natural product diversification, combining the best of both worlds: expediency and synthetic capability of biogenic pathways and chemical diversity enabled by organic synthesis. Biosynthetic pathway engineering can be employed to insert a chemically orthogonal tag into a complex natural scaffold affording the possibility of site-selective modification without employing protecting group strategies. Here we show that, by installing a sufficiently reactive handle (e.g., a C–Br bond) and developing compatible mild aqueous chemistries, synchronous biosynthesis of the tagged metabolite and its subsequent chemical modification in living culture can be achieved. This approach can potentially enable many new applications: for example, assay of directed evolution of enzymes catalyzing halo-metabolite biosynthesis in living cells or generating and following the fate of tagged metabolites and biomolecules in living systems. We report synthetic biological access to new-to-nature bromo-metabolites and the concomitant biorthogonal cross-coupling of halo-metabolites in living culture

    Social entrepreneurs in challenging places: A Delphi study of experiences and perspectives

    Get PDF
    Social Enterprises have grown in number and scope in response to reductions in state-provided welfare and increasing ambition to improve social conditions. While a range of issues have been identified in the literature as affecting the ability of Social Enterprises to successfully conduct their activities, there is currently a dearth of research into the relative influence of these factors. This study explores and ranks the challenges faced by social entrepreneurs in South Wales. Based on a Delphi study with 21 social entrepreneurs, government policy-developers and scholars, it presents a hierarchy of 14 factors, useful instruments for informing social entrepreneurs and policy-makers about the way social enterprises are managed, and how national and local policy should be developed. As part of this, the study also identifies four novel factors that affect the sustainability of social enterprises: ‘Professionalisation of Marketing’, ‘Perception of Validity’, ‘Leadership’ and ‘Situatedness’

    Search for new phenomena in final states with an energetic jet and large missing transverse momentum in pp collisions at √ s = 8 TeV with the ATLAS detector

    Get PDF
    Results of a search for new phenomena in final states with an energetic jet and large missing transverse momentum are reported. The search uses 20.3 fb−1 of √ s = 8 TeV data collected in 2012 with the ATLAS detector at the LHC. Events are required to have at least one jet with pT > 120 GeV and no leptons. Nine signal regions are considered with increasing missing transverse momentum requirements between Emiss T > 150 GeV and Emiss T > 700 GeV. Good agreement is observed between the number of events in data and Standard Model expectations. The results are translated into exclusion limits on models with either large extra spatial dimensions, pair production of weakly interacting dark matter candidates, or production of very light gravitinos in a gauge-mediated supersymmetric model. In addition, limits on the production of an invisibly decaying Higgs-like boson leading to similar topologies in the final state are presente

    Performance of the CMS Cathode Strip Chambers with Cosmic Rays

    Get PDF
    The Cathode Strip Chambers (CSCs) constitute the primary muon tracking device in the CMS endcaps. Their performance has been evaluated using data taken during a cosmic ray run in fall 2008. Measured noise levels are low, with the number of noisy channels well below 1%. Coordinate resolution was measured for all types of chambers, and fall in the range 47 microns to 243 microns. The efficiencies for local charged track triggers, for hit and for segments reconstruction were measured, and are above 99%. The timing resolution per layer is approximately 5 ns

    Analytical tools for monitoring changes in physical and chemical properties of chromatography resin upon reuse

    Get PDF
    Protein A resins are often reused for multiple cycles to improve process economy during mAb purification. Significant reduction in binding capacity and product recovery are typically observed due to the presence of unwanted materials (foulants) deposited on the resin upon reuse. In this paper, we have used a wide spectrum of qualitative and quantitative analytical tools (particle size analysis, HPLC, fluorescence, SEM, MS, and FTIR) to compare the strengths and shortcomings of different analytical tools in terms of their capability to detect the fouling of the resin and relate it to chromatographic cycle performance. While each tool offers an insight into this complex phenomena, fluorescence is the only one that can be used for real‐time monitoring of resin fouling. A correlation could be established between fluorescence intensity and the process performance attributes (like yield or binding capacity) impacted upon resin reuse. This demonstration of the application of fluorescence for real‐time monitoring correlated empirically with process performance attributes and the results support its use as a PAT tool as part of a process control strategy. While the focus of this paper is on fouling of protein A chromatography resin, the approach and strategy are pertinent to other modes of chromatography as well

    The influence of online resources on student–lecturer relationship in higher education: a comparison study

    Get PDF
    The internet has become a key resource for students’ higher education studies due to both its availability and currency. Previously within higher education, lectures, books and course materials were the only sources of information. This change, to more open access to information and more online materials being accessed outside of those provided by lecturers, and indeed institutions, is likely to accelerate and change the way students are learning. This study aims to help institutions understand better the impact of these changes on the student–lecturer relationship by exploring students’ perceptions of their studies in terms of power and students’ academic engagement in the classroom. The importance of the internet (online learning resources) to students’ achievements, the importance of lecturers and the student–lecturer relationship have all been widely investigated. However, limited research has been undertaken examining the impact of students’ use of the internet on the student–lecturer relationship, or comparing this across different countries and cultures. To address this, data were collected via semi- structured questionnaires distributed to undergraduate students from three countries: United Kingdom, Saudi Arabia and Kenya. Quantitative data were analysed using a simple statistical analysis approach and qualitative data were analysed using a thematic analysis approach. The results showed that students’ use of the internet has improved students’ academic self-confidence, academic self-reliance and student– lecturer connectedness, but students’ use of the internet has increased the gap in the student–lecturer expert relationship and referent relationship. The impact and rea- sons for this differed between the countries involved in this study

    Clinical impact of a targeted next-generation sequencing gene panel for autoinflammation and vasculitis.

    Get PDF
    BACKGROUND: Monogenic autoinflammatory diseases (AID) are a rapidly expanding group of genetically diverse but phenotypically overlapping systemic inflammatory disorders associated with dysregulated innate immunity. They cause significant morbidity, mortality and economic burden. Here, we aimed to develop and evaluate the clinical impact of a NGS targeted gene panel, the "Vasculitis and Inflammation Panel" (VIP) for AID and vasculitis. METHODS: The Agilent SureDesign tool was used to design 2 versions of VIP; VIP1 targeting 113 genes, and a later version, VIP2, targeting 166 genes. Captured and indexed libraries (QXT Target Enrichment System) prepared for 72 patients were sequenced as a multiplex of 16 samples on an Illumina MiSeq sequencer in 150bp paired-end mode. The cohort comprised 22 positive control DNA samples from patients with previously validated mutations in a variety of the genes; and 50 prospective samples from patients with suspected AID in whom previous Sanger based genetic screening had been non-diagnostic. RESULTS: VIP was sensitive and specific at detecting all the different types of known mutations in 22 positive controls, including gene deletion, small INDELS, and somatic mosaicism with allele fraction as low as 3%. Six/50 patients (12%) with unclassified AID had at least one class 5 (clearly pathogenic) variant; and 11/50 (22%) had at least one likely pathogenic variant (class 4). Overall, testing with VIP resulted in a firm or strongly suspected molecular diagnosis in 16/50 patients (32%). CONCLUSIONS: The high diagnostic yield and accuracy of this comprehensive targeted gene panel validate the use of broad NGS-based testing for patients with suspected AID

    Search for High-Mass Resonances Decaying to τν in pp Collisions at √s=13 TeV with the ATLAS Detector

    Get PDF
    A search for high-mass resonances decaying to τν using proton-proton collisions at √s=13 TeV produced by the Large Hadron Collider is presented. Only τ-lepton decays with hadrons in the final state are considered. The data were recorded with the ATLAS detector and correspond to an integrated luminosity of 36.1 fb−1. No statistically significant excess above the standard model expectation is observed; model-independent upper limits are set on the visible τν production cross section. Heavy W′ bosons with masses less than 3.7 TeV in the sequential standard model and masses less than 2.2–3.8 TeV depending on the coupling in the nonuniversal G(221) model are excluded at the 95% credibility level
    corecore