Centrality dependence of charged particle production at large transverse momentum in Pb-Pb collisions at sNN=2.76\sqrt{s_{\rm{NN}}} = 2.76 TeV

The inclusive transverse momentum ($p_{\rm T}$) distributions of primary charged particles are measured in the pseudo-rapidity range $|\eta|<0.8$ as a function of event centrality in Pb-Pb collisions at $\sqrt{s_{\rm{NN}}}=2.76$ TeV with ALICE at the LHC. The data are presented in the $p_{\rm T}$ range $0.15<p_{\rm T}<50$ GeV/$c$ for nine centrality intervals from 70-80% to 0-5%. The Pb-Pb spectra are presented in terms of the nuclear modification factor $R_{\rm{AA}}$ using a pp reference spectrum measured at the same collision energy. We observe that the suppression of high-$p_{\rm T}$ particles strongly depends on event centrality. In central collisions (0-5%) the yield is most suppressed with $R_{\rm{AA}}\approx0.13$ at $p_{\rm T}=6$-7 GeV/$c$. Above $p_{\rm T}=7$ GeV/$c$, there is a significant rise in the nuclear modification factor, which reaches $R_{\rm{AA}} \approx0.4$ for $p_{\rm T}>30$ GeV/$c$. In peripheral collisions (70-80%), the suppression is weaker with $R_{\rm{AA}} \approx 0.7$ almost independently of $p_{\rm T}$. The measured nuclear modification factors are compared to other measurements and model calculations.Comment: 17 pages, 4 captioned figures, 2 tables, authors from page 12, published version, figures at http://aliceinfo.cern.ch/ArtSubmission/node/284

Anisotropic flow of charged hadrons, pions and (anti-)protons measured at high transverse momentum in Pb-Pb collisions at sNN=2.76\sqrt{s_{\rm NN}}=2.76 TeV

The elliptic, $v_2$, triangular, $v_3$, and quadrangular, $v_4$, azimuthal anisotropic flow coefficients are measured for unidentified charged particles, pions and (anti-)protons in Pb-Pb collisions at $\sqrt{s_{\rm NN}} = 2.76$ TeV with the ALICE detector at the Large Hadron Collider. Results obtained with the event plane and four-particle cumulant methods are reported for the pseudo-rapidity range $|\eta|<0.8$ at different collision centralities and as a function of transverse momentum, $p_{\rm T}$, out to $p_{\rm T}=20$ GeV/$c$. The observed non-zero elliptic and triangular flow depends only weakly on transverse momentum for $p_{\rm T}>8$ GeV/$c$. The small $p_{\rm T}$ dependence of the difference between elliptic flow results obtained from the event plane and four-particle cumulant methods suggests a common origin of flow fluctuations up to $p_{\rm T}=8$ GeV/$c$. The magnitude of the (anti-)proton elliptic and triangular flow is larger than that of pions out to at least $p_{\rm T}=8$ GeV/$c$ indicating that the particle type dependence persists out to high $p_{\rm T}$.Comment: 16 pages, 5 captioned figures, authors from page 11, published version, figures at http://aliceinfo.cern.ch/ArtSubmission/node/186

Measurement of charm production at central rapidity in proton-proton collisions at s=2.76\sqrt{s} = 2.76 TeV

The $p_{\rm T}$-differential production cross sections of the prompt (B feed-down subtracted) charmed mesons D$^0$, D$^+$, and D$^{*+}$ in the rapidity range $|y|<0.5$, and for transverse momentum $1< p_{\rm T} <12$ GeV/$c$, were measured in proton-proton collisions at $\sqrt{s} = 2.76$ TeV with the ALICE detector at the Large Hadron Collider. The analysis exploited the hadronic decays D$^0 \rightarrow$K$\pi$, D$^+ \rightarrow$K$\pi\pi$, D$^{*+} \rightarrow$D$^0\pi$, and their charge conjugates, and was performed on a $L_{\rm int} = 1.1$ nb$^{-1}$ event sample collected in 2011 with a minimum-bias trigger. The total charm production cross section at $\sqrt{s} = 2.76$ TeV and at 7 TeV was evaluated by extrapolating to the full phase space the $p_{\rm T}$-differential production cross sections at $\sqrt{s} = 2.76$ TeV and our previous measurements at $\sqrt{s} = 7$ TeV. The results were compared to existing measurements and to perturbative-QCD calculations. The fraction of cdbar D mesons produced in a vector state was also determined.Comment: 20 pages, 5 captioned figures, 4 tables, authors from page 15, published version, figures at http://aliceinfo.cern.ch/ArtSubmission/node/307

Particle-yield modification in jet-like azimuthal di-hadron correlations in Pb-Pb collisions at sNN\sqrt{s_{\rm NN}} = 2.76 TeV

The yield of charged particles associated with high-$p_{\rm T}$ trigger particles ($8 < p_{\rm T} < 15$ GeV/$c$) is measured with the ALICE detector in Pb-Pb collisions at $\sqrt{s_{\rm NN}}$ = 2.76 TeV relative to proton-proton collisions at the same energy. The conditional per-trigger yields are extracted from the narrow jet-like correlation peaks in azimuthal di-hadron correlations. In the 5% most central collisions, we observe that the yield of associated charged particles with transverse momenta $p_{\rm T}> 3$ GeV/$c$ on the away-side drops to about 60% of that observed in pp collisions, while on the near-side a moderate enhancement of 20-30% is found.Comment: 15 pages, 2 captioned figures, 1 table, authors from page 10, published version, figures at http://aliceinfo.cern.ch/ArtSubmission/node/350

Search for direct production of charginos and neutralinos in events with three leptons and missing transverse momentum in √s = 7 TeV pp collisions with the ATLAS detector

A search for the direct production of charginos and neutralinos in final states with three electrons or muons and missing transverse momentum is presented. The analysis is based on 4.7 fb−1 of proton–proton collision data delivered by the Large Hadron Collider and recorded with the ATLAS detector. Observations are consistent with Standard Model expectations in three signal regions that are either depleted or enriched in Z-boson decays. Upper limits at 95% confidence level are set in R-parity conserving phenomenological minimal supersymmetric models and in simplified models, significantly extending previous results

Jet size dependence of single jet suppression in lead-lead collisions at sqrt(s(NN)) = 2.76 TeV with the ATLAS detector at the LHC

Measurements of inclusive jet suppression in heavy ion collisions at the LHC provide direct sensitivity to the physics of jet quenching. In a sample of lead-lead collisions at sqrt(s) = 2.76 TeV corresponding to an integrated luminosity of approximately 7 inverse microbarns, ATLAS has measured jets with a calorimeter over the pseudorapidity interval |eta| < 2.1 and over the transverse momentum range 38 < pT < 210 GeV. Jets were reconstructed using the anti-kt algorithm with values for the distance parameter that determines the nominal jet radius of R = 0.2, 0.3, 0.4 and 0.5. The centrality dependence of the jet yield is characterized by the jet "central-to-peripheral ratio," Rcp. Jet production is found to be suppressed by approximately a factor of two in the 10% most central collisions relative to peripheral collisions. Rcp varies smoothly with centrality as characterized by the number of participating nucleons. The observed suppression is only weakly dependent on jet radius and transverse momentum. These results provide the first direct measurement of inclusive jet suppression in heavy ion collisions and complement previous measurements of dijet transverse energy imbalance at the LHC.Comment: 15 pages plus author list (30 pages total), 8 figures, 2 tables, submitted to Physics Letters B. All figures including auxiliary figures are available at http://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/HION-2011-02

Rational use of antioxidants in solid oral pharmaceutical preparations

Antioxidants are currently used as efficient excipients that delay or inhibit the oxidation process of molecules. Excipients are often associated with adverse reactions. Stability studies can guide the search for solutions that minimize or delay the processes of degradation. The ability to predict oxidation reactions in different drugs is important. Methods: This study was conducted to assess the rational use of butylated hydroxyanisole (BHA), butylated hydroxytoluene (BHT), sodium metabisulfite (SMB), propyl gallate (PG) and cysteine (CYS) in tablet formulations of simvastatin and ketoconazole. These antioxidants were evaluated according to stability parameters and the relationship between efficiency of the antioxidant and chemical structure of the drugs. Results were compared with DPPH tests and computational simulations. BHT was most efficient regarding simvastatin stability, and the most effective BHT concentrations for maintaining stability were 0.5 and 0.1%. In relation to ketoconazole, SMB was most efficient for maintaining content and dissolution profile. The evaluation by DPPH showed that the largest percentage of absorbance reduction was observed for PG, while SMB proved most efficient and had lower consumption of DPPH. The same pattern was observed, albeit with lower efficiency, for the other lipophilic antioxidants such as BHT and BHA. The results of the molecular modeling study demonstrated that electronic properties obtained were correlated with antioxidant activity in solution, being useful for the rational development of liquid pharmaceutical formulations but not for solid oral formulations. This study demonstrated the importance of considering stability parameters and molecular modeling to elucidate the chemical phenomena involved in antioxidant activity, being useful for the rational use of antioxidants in the development of pharmaceutical formulations.Atualmente, antioxidantes são usados como excipientes eficientes, que retardam ou inibem o processo de oxidação de moléculas. Excipientes são frequentemente associados a efeitos adversos. Estudos de estabilidade podem ajudar na busca por possíveis soluções para minimizar ou retardar os processos de degradação. A habilidade de prever as reações de oxidação em diferentes fármacos é importante. O estudo foi conduzido com o objetivo de avaliar o uso racional de hidroxianisol butilado (BHA), hidroxitolueno butilado (BHT), metabissulfito sódico (SMB), galato de propila (PG) e cisteína (CYS) em formulações de comprimidos de sinvastatina e cetoconazol. Eles foram avaliados por parâmetros de estabilidade e pela relação entre a eficiência dos antioxidantes e a estrutura química do fármaco. Os resultados foram comparados com testes de DPPH e simulações em computador. BHT foi mais eficiente com relação a estabilidade da sinvastatina e às concentrações mais eficientes para manutenção de estabilidade foram 0,5 e 0,1%. Com relação ao cetoconazol, SMB foi mais eficiente em manter o conteúdo e o perfil de dissolução. A avaliação por DPPH mostrou que o maior percentual de redução de absorção foi observado para PG, enquanto que SMB mostrou ser mais eficiente e consumir menos DPPH. A mesma tendência foi observada com menos eficiência em todos os outros antioxidantes lipofílicos como o BHT e BHA. Os resultados do estudo de modelagem molecular demonstraram que as propriedades eletrônicas obtidas podem ser correlacionadas com a atividade antioxidante em solução, sendo útil para o desenvolvimento racional de formulações farmacêuticas líquidas, mas não para formulações sólidas orais. Este estudo demonstrou a importância de considerar parâmetros de estabilidade e modelagem molecular para elucidar os fenômenos químicos envolvidos na atividade antioxidante, sendo úteis para o uso racional de antioxidantes no desenvolvimento de formulações farmacêuticas