Effects of hospital facilities on patient outcomes after cancer surgery: an international, prospective, observational study

Background Early death after cancer surgery is higher in low-income and middle-income countries (LMICs) compared with in high-income countries, yet the impact of facility characteristics on early postoperative outcomes is unknown. The aim of this study was to examine the association between hospital infrastructure, resource availability, and processes on early outcomes after cancer surgery worldwide.Methods A multimethods analysis was performed as part of the GlobalSurg 3 study-a multicentre, international, prospective cohort study of patients who had surgery for breast, colorectal, or gastric cancer. The primary outcomes were 30-day mortality and 30-day major complication rates. Potentially beneficial hospital facilities were identified by variable selection to select those associated with 30-day mortality. Adjusted outcomes were determined using generalised estimating equations to account for patient characteristics and country-income group, with population stratification by hospital.Findings Between April 1, 2018, and April 23, 2019, facility-level data were collected for 9685 patients across 238 hospitals in 66 countries (91 hospitals in 20 high-income countries; 57 hospitals in 19 upper-middle-income countries; and 90 hospitals in 27 low-income to lower-middle-income countries). The availability of five hospital facilities was inversely associated with mortality: ultrasound, CT scanner, critical care unit, opioid analgesia, and oncologist. After adjustment for case-mix and country income group, hospitals with three or fewer of these facilities (62 hospitals, 1294 patients) had higher mortality compared with those with four or five (adjusted odds ratio [OR] 3.85 [95% CI 2.58-5.75]; p<0.0001), with excess mortality predominantly explained by a limited capacity to rescue following the development of major complications (63.0% vs 82.7%; OR 0.35 [0.23-0.53]; p<0.0001). Across LMICs, improvements in hospital facilities would prevent one to three deaths for every 100 patients undergoing surgery for cancer.Interpretation Hospitals with higher levels of infrastructure and resources have better outcomes after cancer surgery, independent of country income. Without urgent strengthening of hospital infrastructure and resources, the reductions in cancer-associated mortality associated with improved access will not be realised

The burden of injury in Central, Eastern, and Western European sub-region : a systematic analysis from the Global Burden of Disease 2019 Study

Background Injury remains a major concern to public health in the European region. Previous iterations of the Global Burden of Disease (GBD) study showed wide variation in injury death and disability adjusted life year (DALY) rates across Europe, indicating injury inequality gaps between sub-regions and countries. The objectives of this study were to: 1) compare GBD 2019 estimates on injury mortality and DALYs across European sub-regions and countries by cause-of-injury category and sex; 2) examine changes in injury DALY rates over a 20 year-period by cause-of-injury category, sub-region and country; and 3) assess inequalities in injury mortality and DALY rates across the countries. Methods We performed a secondary database descriptive study using the GBD 2019 results on injuries in 44 European countries from 2000 to 2019. Inequality in DALY rates between these countries was assessed by calculating the DALY rate ratio between the highest-ranking country and lowest-ranking country in each year. Results In 2019, in Eastern Europe 80 [95% uncertainty interval (UI): 71 to 89] people per 100,000 died from injuries; twice as high compared to Central Europe (38 injury deaths per 100,000; 95% UI 34 to 42) and three times as high compared to Western Europe (27 injury deaths per 100,000; 95%UI 25 to 28). The injury DALY rates showed less pronounced differences between Eastern (5129 DALYs per 100,000; 95% UI: 4547 to 5864), Central (2940 DALYs per 100,000; 95% UI: 2452 to 3546) and Western Europe (1782 DALYs per 100,000; 95% UI: 1523 to 2115). Injury DALY rate was lowest in Italy (1489 DALYs per 100,000) and highest in Ukraine (5553 DALYs per 100,000). The difference in injury DALY rates by country was larger for males compared to females. The DALY rate ratio was highest in 2005, with DALY rate in the lowest-ranking country (Russian Federation) 6.0 times higher compared to the highest-ranking country (Malta). After 2005, the DALY rate ratio between the lowest- and the highest-ranking country gradually decreased to 3.7 in 2019. Conclusions Injury mortality and DALY rates were highest in Eastern Europe and lowest in Western Europe, although differences in injury DALY rates declined rapidly, particularly in the past decade. The injury DALY rate ratio of highest- and lowest-ranking country declined from 2005 onwards, indicating declining inequalities in injuries between European countries.Peer reviewe

Large expert-curated database for benchmarking document similarity detection in biomedical literature search

Document recommendation systems for locating relevant literature have mostly relied on methods developed a decade ago. This is largely due to the lack of a large offline gold-standard benchmark of relevant documents that cover a variety of research fields such that newly developed literature search techniques can be compared, improved and translated into practice. To overcome this bottleneck, we have established the RElevant LIterature SearcH consortium consisting of more than 1500 scientists from 84 countries, who have collectively annotated the relevance of over 180 000 PubMed-listed articles with regard to their respective seed (input) article/s. The majority of annotations were contributed by highly experienced, original authors of the seed articles. The collected data cover 76% of all unique PubMed Medical Subject Headings descriptors. No systematic biases were observed across different experience levels, research fields or time spent on annotations. More importantly, annotations of the same document pairs contributed by different scientists were highly concordant. We further show that the three representative baseline methods used to generate recommended articles for evaluation (Okapi Best Matching 25, Term Frequency-Inverse Document Frequency and PubMed Related Articles) had similar overall performances. Additionally, we found that these methods each tend to produce distinct collections of recommended articles, suggesting that a hybrid method may be required to completely capture all relevant articles. The established database server located at https://relishdb.ict.griffith.edu.au is freely available for the downloading of annotation data and the blind testing of new methods. We expect that this benchmark will be useful for stimulating the development of new powerful techniques for title and title/abstract-based search engines for relevant articles in biomedical research.Peer reviewe

Production of activated carbon from palm oil shell waste and its adsorption characteristics

The effects of raw material treatment and concentration of phosphoric acid on the characteristics of activated carbon were investigated. Adsorptions of Cu, Pb, Cr and Cd in activated carbon were carried out to evaluate the adsorptive capacity of selected activated carbons. It was found that treated raw material reduces inorganic element and increases Brunet Elmer Teller (BET) surface area of the activated carbon. The optimum BET surface area was achieved with following conditions; 30% phosphoric acid concentration, treated raw material, and activation temperature of 500oC with holding time of 2 hours. The optimum BET surface area and the average pore diameter were found to be 1058 m2g-1 and 20.64nm, respectively. The pore size distribution of the activated carbon by scanning electron microscopy (SEM) also confirmed to these conditions. Thermal stability of these samples was investigated using thermal gravimetric analyzer (TGA). The maximum thermal stability was observed up to 600oC. Adsorption studies for activated carbon impregnated with 30% H3PO4 in the application of filter system confirm the adsorbing capacity of activated carbon. In this study, it was observed 100% of Cr was adsorbed followed by Pb (99.8 %), Cd (99.5 %) and Cu (25 %)

Production of activated carbon from palm oil shell waste and its adsorption characteristics

The effects of raw material treatment and concentration of phosphoric acid on the characteristics of activated carbon were investigated. Adsorptions of Cu, Pb, Cr and Cd in activated carbon were carried out to evaluate the adsorptive capacity of selected activated carbons. It was found that treated raw material reduces inorganic element and increases Brunet Elmer Teller (BET) surface area of the activated carbon. The optimum BET surface area was achieved with following conditions; 30% phosphoric acid concentration, treated raw material, and activation temperature of 500oC with holding time of 2 hours. The optimum BET surface area and the average pore diameter were found to be 1058 m2g-1 and 20.64nm, respectively. The pore size distribution of the activated carbon by scanning electron microscopy (SEM) also confirmed to these conditions. Thermal stability of these samples was investigated using thermal gravimetric analyzer (TGA). The maximum thermal stability was observed up to 6000C. Adsorption studies for activated carbon impregnated with 30% H3PO4 in the application of filter system confirm the adsorbing capacity of activated carbon. In this study, it was observed 100% of Cr was adsorbed followed by Pb (99.8 %), Cd (99.5 %) and Cu (25 %)

Waste palm shell converted to high efficient activated carbon by chemical activation method and its adsorption capacity tested by water filtration

The concentrations of phosphoric acid on the characteristics of high efficient activated carbon were investigated. Adsorptions capacities of activated carbon prepared by chemical method were carried out to evaluate the adsorptive of some heavy metals. It was found that treated (palm shell by sulphuric acid, 5%) raw material reduces contain of impurities and increases Brunet Elmer Teller (BET) surface area of the prepared activated carbon. The most advantageous BET surface area was obtained with following conditions; phosphoric acid concentration was 30%, treated raw material and 5000C was activation temperature with holding time of 2 hours. Obtained BET surface area is 1058 m2g-1 and the average pore diameter was found 20.64 nm. Scanning electron microscopy (SEM) also confirmed the pore size distribution on the activated carbon. The maximum thermal stability was observed up to 6000C by thermal gravimetric analyzer (TGA). Adsorption capacity of the activated carbon was tested passed by artificially polluted water through a water filtering column and it was observed 100% of Cr was adsorbed followed by Pb (99.8 %), Cd (99.5 %) and Cu (25 %)

Global variation in postoperative mortality and complications after cancer surgery: a multicentre, prospective cohort study in 82 countries

Background: 80% of individuals with cancer will require a surgical procedure, yet little comparative data exist on early outcomes in low-income and middle-income countries (LMICs). We compared postoperative outcomes in breast, colorectal, and gastric cancer surgery in hospitals worldwide, focusing on the effect of disease stage and complications on postoperative mortality. Methods: This was a multicentre, international prospective cohort study of consecutive adult patients undergoing surgery for primary breast, colorectal, or gastric cancer requiring a skin incision done under general or neuraxial anaesthesia. The primary outcome was death or major complication within 30 days of surgery. Multilevel logistic regression determined relationships within three-level nested models of patients within hospitals and countries. Hospital-level infrastructure effects were explored with three-way mediation analyses. This study was registered with ClinicalTrials.gov, NCT03471494. Findings: Between April 1, 2018, and Jan 31, 2019, we enrolled 15 958 patients from 428 hospitals in 82 countries (high income 9106 patients, 31 countries; upper-middle income 2721 patients, 23 countries; or lower-middle income 4131 patients, 28 countries). Patients in LMICs presented with more advanced disease compared with patients in high-income countries. 30-day mortality was higher for gastric cancer in low-income or lower-middle-income countries (adjusted odds ratio 3·72, 95% CI 1·70–8·16) and for colorectal cancer in low-income or lower-middle-income countries (4·59, 2·39–8·80) and upper-middle-income countries (2·06, 1·11–3·83). No difference in 30-day mortality was seen in breast cancer. The proportion of patients who died after a major complication was greatest in low-income or lower-middle-income countries (6·15, 3·26–11·59) and upper-middle-income countries (3·89, 2·08–7·29). Postoperative death after complications was partly explained by patient factors (60%) and partly by hospital or country (40%). The absence of consistently available postoperative care facilities was associated with seven to 10 more deaths per 100 major complications in LMICs. Cancer stage alone explained little of the early variation in mortality or postoperative complications. Interpretation: Higher levels of mortality after cancer surgery in LMICs was not fully explained by later presentation of disease. The capacity to rescue patients from surgical complications is a tangible opportunity for meaningful intervention. Early death after cancer surgery might be reduced by policies focusing on strengthening perioperative care systems to detect and intervene in common complications. Funding: National Institute for Health Research Global Health Research Unit