Pre-concentration of rosuvastatin using solid-phase extraction in a molecularly imprinted polymer and analytical application in water supply

In this work, it is shown the development and validation of innovative analytical methodology based on solid-phase extraction (SPE) with molecularly imprinted polymers (MIP) as a sorbent associated to UV–Vis spectroscopy to isolate and quantify, respectively, rosuvastatin (RSV) in water samples. For this purpose, porogenic solvent in MIP synthesis and SPE extraction parameters for MIP and non-imprinted polymers (NIP) were evaluated univariately for comparison purposes. The sorptive capacity and characterization studies by infrared spectroscopy and atomic force microscopy showed difference between MIP and NIP. The selectivity study of the MIP–RSVagainst other statins (simvastatin and atorvastatin) showed that the synthesized MIP can also be applied as a solid phase for isolation and quantitative pre-concentration of RSVand atorvastatin. The conjugation of SPE and UV–Vis spectroscopy in the determination of RSV in aqueous matrices led to large factor of pre-concentration (125 times), limit of detection (LOD) of 3 μg L−1, limit of quantification (LOQ) of 10 μg L−1, precision of 2.87% (n = 10), and accuracy of 83.1% (n = 4)

Square-wave voltammetric determination of primaquine in urine using a multi-walled carbon nanotube modified electrode

The electrochemical process involving primaquine was studied at a glassy carbon (GC) electrode modified with multi-walled carbon nanotubes (MWCNT). The GC/MWCNTs electrode promoted an intense oxidation peak for primaquine, improving signal when compared to the one observed using bare GC as electrode. Besides the increasing in active electrode area, the MWCNTs seemed to provide faster electron transfer. The linear analytical response for primaquine, in the concentration range from 0.1 to 5.0 μmol L−1, was achieved on a supporting electrolyte consisting of Britton-Robinson buffer (0.02 mol L−1; pH 7.00) and KCl (0.25 mol L−1). The quantitative assay using square-wave voltammetry was performed by successive additions of standard into the electrochemical cell, containing the sample, with instrumental limit of detection (LOD) of 7.3 μg L−1 (28 nmol L−1). A procedure involving liquid-liquid extraction and thin-layer chromatography provided selectivity and pre-concentration required for the determination of traces of primaquine in urine samples (LOD of the method of 146 ng L−1). Recoveries in urine samples were statistically similar to the one achieved by HPLC

Synthesis and application of molecularly imprinted polymers for the extraction of caffeine from food and beverage samples / Síntese e aplicação de polímeros com impressão molecular para a extracção de cafeína de amostras de alimentos e bebidas

In this present study molecularly imprinted polymers were synthesized and characterized in order to extract caffeine from different food and beverage samples. The characteristics of molecular recognition of these polymers were used to develop a MIP-SPE methodology, a pre treatment able to eliminate interferences. The accuracy of the proposed method reached 96,4 ± 4,7% and the intermediate precision 2.30%. MIP-SPE cartridges here produced can be reused for at least 3 cycles, being much more affordable than the traditional commercial SPE cartridges. Caffeine was analyzed in fifteen food and beverage samples by the here developed method. It is particularly interesting to emphasize that the analyses of soft drinks and coffee powder samples made it possible to attest that, for this sort of samples, the proposed method is able to completely eliminate all the interferences present in these matrices, being unnecessary to apply chromatographic separation previously to analyte quantification. This result assures the method's selectivity and turns its application to these samples much faster, environmentally friendly and economically affordable. There are other works in literature that propose the use of MIP-SPE to perform caffeine determination in some food and beverage samples, but none of them reaches good accuracy and precision. Also, none of them presented selectivity enough not to need the use of chromatographic separation.  

Search for CP Violation in the Decay Z -> b (b bar) g

About three million hadronic decays of the Z collected by ALEPH in the years 1991-1994 are used to search for anomalous CP violation beyond the Standard Model in the decay Z -> b \bar{b} g. The study is performed by analyzing angular correlations between the two quarks and the gluon in three-jet events and by measuring the differential two-jet rate. No signal of CP violation is found. For the combinations of anomalous CP violating couplings, ${\hat{h}}_b = {\hat{h}}_{Ab}g_{Vb}-{\hat{h}}_{Vb}g_{Ab}$ and $h^{\ast}_b = \sqrt{\hat{h}_{Vb}^{2}+\hat{h}_{Ab}^{2}}$, limits of \hat{h}_b < 0.59$and$h^{\ast}_{b} < 3.02$ are given at 95\% CL.Comment: 8 pages, 1 postscript figure, uses here.sty, epsfig.st

A First Search for coincident Gravitational Waves and High Energy Neutrinos using LIGO, Virgo and ANTARES data from 2007

We present the results of the first search for gravitational wave bursts associated with high energy neutrinos. Together, these messengers could reveal new, hidden sources that are not observed by conventional photon astronomy, particularly at high energy. Our search uses neutrinos detected by the underwater neutrino telescope ANTARES in its 5 line configuration during the period January - September 2007, which coincided with the fifth and first science runs of LIGO and Virgo, respectively. The LIGO-Virgo data were analysed for candidate gravitational-wave signals coincident in time and direction with the neutrino events. No significant coincident events were observed. We place limits on the density of joint high energy neutrino - gravitational wave emission events in the local universe, and compare them with densities of merger and core-collapse events.Comment: 19 pages, 8 figures, science summary page at http://www.ligo.org/science/Publication-S5LV_ANTARES/index.php. Public access area to figures, tables at https://dcc.ligo.org/cgi-bin/DocDB/ShowDocument?docid=p120000

Measurement of the cross-section and charge asymmetry of WW bosons produced in proton-proton collisions at s=8\sqrt{s}=8 TeV with the ATLAS detector

This paper presents measurements of the $W^+ \rightarrow \mu^+\nu$ and $W^- \rightarrow \mu^-\nu$ cross-sections and the associated charge asymmetry as a function of the absolute pseudorapidity of the decay muon. The data were collected in proton--proton collisions at a centre-of-mass energy of 8 TeV with the ATLAS experiment at the LHC and correspond to a total integrated luminosity of 20.2~\mbox{fb^{-1}}. The precision of the cross-section measurements varies between 0.8% to 1.5% as a function of the pseudorapidity, excluding the 1.9% uncertainty on the integrated luminosity. The charge asymmetry is measured with an uncertainty between 0.002 and 0.003. The results are compared with predictions based on next-to-next-to-leading-order calculations with various parton distribution functions and have the sensitivity to discriminate between them.Comment: 38 pages in total, author list starting page 22, 5 figures, 4 tables, submitted to EPJC. All figures including auxiliary figures are available at https://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/STDM-2017-13

Search for chargino-neutralino production with mass splittings near the electroweak scale in three-lepton final states in √s=13 TeV pp collisions with the ATLAS detector

A search for supersymmetry through the pair production of electroweakinos with mass splittings near the electroweak scale and decaying via on-shell W and Z bosons is presented for a three-lepton final state. The analyzed proton-proton collision data taken at a center-of-mass energy of √s=13  TeV were collected between 2015 and 2018 by the ATLAS experiment at the Large Hadron Collider, corresponding to an integrated luminosity of 139  fb−1. A search, emulating the recursive jigsaw reconstruction technique with easily reproducible laboratory-frame variables, is performed. The two excesses observed in the 2015–2016 data recursive jigsaw analysis in the low-mass three-lepton phase space are reproduced. Results with the full data set are in agreement with the Standard Model expectations. They are interpreted to set exclusion limits at the 95% confidence level on simplified models of chargino-neutralino pair production for masses up to 345 GeV

Search for direct stau production in events with two hadronic tau-leptons in root s=13 TeV pp collisions with the ATLAS detector

A search for the direct production of the supersymmetric partners ofτ-leptons (staus) in final stateswith two hadronically decayingτ-leptons is presented. The analysis uses a dataset of pp collisions corresponding to an integrated luminosity of139fb−1, recorded with the ATLAS detector at the LargeHadron Collider at a center-of-mass energy of 13 TeV. No significant deviation from the expected StandardModel background is observed. Limits are derived in scenarios of direct production of stau pairs with eachstau decaying into the stable lightest neutralino and oneτ-lepton in simplified models where the two staumass eigenstates are degenerate. Stau masses from 120 GeV to 390 GeV are excluded at 95% confidencelevel for a massless lightest neutralino

Search for squarks and gluinos in events with isolated leptons, jets and missing transverse momentum at s√=8 TeV with the ATLAS detector

The results of a search for supersymmetry in final states containing at least one isolated lepton (electron or muon), jets and large missing transverse momentum with the ATLAS detector at the Large Hadron Collider are reported. The search is based on proton-proton collision data at a centre-of-mass energy s√=8 TeV collected in 2012, corresponding to an integrated luminosity of 20 fb−1. No significant excess above the Standard Model expectation is observed. Limits are set on supersymmetric particle masses for various supersymmetric models. Depending on the model, the search excludes gluino masses up to 1.32 TeV and squark masses up to 840 GeV. Limits are also set on the parameters of a minimal universal extra dimension model, excluding a compactification radius of 1/R c = 950 GeV for a cut-off scale times radius (ΛR c) of approximately 30