A preliminary evaluation of a hydraulic mechanical splitter as a means of breaking rock in a deep-level mine

Conventional drill-and-blast practice in deep-level hard rock mining impacts negatively on the immediate environment and alternatives are frequently sought for efficient, continuous, automated and safe rock breaking. The current method for breaking rock, drilling and blasting, is a “cyclic” activity where the rock mass is drilled, blasted, cleaned and the area supported. The mining process must be completed within the blasting times. Continuous rock breaking presents the opportunity to eliminate the “cyclic or batch” mode and improve productivity. Such a system for non-explosives continuous rock breaking is the hydraulic rock splitter. The choice for the splitter is the equipment is relative simple, easy to use, readily available and affordable, and has been successfully used in the construction and civil industries. The purpose of this study was to evaluate the functionality and applicability of the hydraulic mechanical splitter in deep-level hard rock mining. The specific instrument used in the study was the DARDA® hydraulic splitter. Rock breaking with the use of a hydraulic splitter has a place in niche applications in an underground mining operation. The static hand-held tool has distinct advantages in restricted areas. The unit is simple in design and is easily integrated into existing mining operations, and neither does it require a highly technical skilled workforce or expensive maintenance. A literature study was undertaken, with the main focus on non-explosives rock breaking where a hole needs to be drilled into the rock mass. A device or application is inserted into the hole to fracture the rock mass. The specific DARDA® hydraulic splitter used during the trials required a hole diameter of 45mm to 48mm and a minimum hole length of 680mm. Several trials were conducted on surface and underground. The most challenging process in mechanical rock splitting is to create a free face in the stope. In the trials four different “cut” layouts were evaluated to create a second free face. The trials highlighted the importance of quality drilling in terms of collaring the hole, hole length and directional accuracy. The results showed the potential of the DARDA® hydraulic splitter. Drilling the least number of holes produced the least amount of rock. The greater the cross-sectional area of holes drilled, increased the amount of broken rock and resulted in easier splitting, due to the increased void. The mass of rock broken per cut varied between 30 kilograms to 65 kilograms with cross-sectional areas of 0.09m2 and 0.144m2 respectively. The operational learning included the frequent lubrication of the feathers and the wedge. The unit needed to be supported during the splitting process, small rock fragments were caught between the moving parts. Fragments deep inside the “cut” area had to be removed manually and during the splitting process, starting at the hanging wall, obscured the holes close to the footwall due to rock fragments on the footwall. To alleviate a number of operational issues experienced during the trials, include the automation of the lubrication of the feathers and wedge, supporting the cylinder unit during the splitting process and small stones wedged between the moving parts to be removed prior to inserting the splitter into the next pre-drilled hole. The cross-sectional area of the cut should be as large as possible for the rock fragments to easily fall to the foot wall and the splitting process should start from the bottom to the hanging wall to not obscure the drilled holes with rock fragments.Dissertation (MEng)--University of Pretoria, 2018.Mining EngineeringMEngUnrestricte

Risks and challenges affecting opencast pillar mining in previously mined underground bord and pillar workings

South Africa is one of the leading producers and exporters of coal globally. A significant amount of the country’s production is obtained from previously mined underground bord and pillar workings. This coal is in the form of pillars and remnants on the roof and floor of the old workings. The good quality coal pillars were left behind as primary support during underground bord and pillar mining operations. Due to the depletion of virgin coal reserves, the pillars and remnant coal are now removed using opencast mining rather than underground methods. However, the secondary extraction of pillars and remnant coal from the old workings using opencast methods entails some serious challenges that have a negative impact on the safety and productivity of the operations, affecting both personnel and machinery. If these risk factors and challenges are managed properly, then the opencast mining operations could remove the pillars safely at recoveries competitive with those of virgin coal operations. In this study we review the recurring challenges affecting opencast pillar mining by means of field investigations and consultations with experts at five opencast pillar mining operations, and evaluate the best practices used to combat these challenges. It was found that each mine has its own unique conditions and challenges.http://www.saimm.co.za/journal-papersam2022Mining Engineerin

System Test of the ATLAS Muon Spectrometer in the H8 Beam at the CERN SPS

An extensive system test of the ATLAS muon spectrometer has been performed in the H8 beam line at the CERN SPS during the last four years. This spectrometer will use pressurized Monitored Drift Tube (MDT) chambers and Cathode Strip Chambers (CSC) for precision tracking, Resistive Plate Chambers (RPCs) for triggering in the barrel and Thin Gap Chambers (TGCs) for triggering in the end-cap region. The test set-up emulates one projective tower of the barrel (six MDT chambers and six RPCs) and one end-cap octant (six MDT chambers, A CSC and three TGCs). The barrel and end-cap stands have also been equipped with optical alignment systems, aiming at a relative positioning of the precision chambers in each tower to 30-40 micrometers. In addition to the performance of the detectors and the alignment scheme, many other systems aspects of the ATLAS muon spectrometer have been tested and validated with this setup, such as the mechanical detector integration and installation, the detector control system, the data acquisition, high level trigger software and off-line event reconstruction. Measurements with muon energies ranging from 20 to 300 GeV have allowed measuring the trigger and tracking performance of this set-up, in a configuration very similar to the final spectrometer. A special bunched muon beam with 25 ns bunch spacing, emulating the LHC bunch structure, has been used to study the timing resolution and bunch identification performance of the trigger chambers. The ATLAS first-level trigger chain has been operated with muon trigger signals for the first time

Are attitudes towards mental health help-seeking associated with service use? Results from the European Study of Epidemiology of Mental Disorders

To investigate the prevailing attitudes towards mental health help-seeking in Europe, their correlates, and whether these attitudes are associated with actual service use for mental health problems. Data were derived from the European Study of Epidemiology of Mental Disorders, a survey representative of the adult population of six countries: Belgium, France, Germany, Italy, the Netherlands and Spain (n = 8,796). The World Mental Health Composite International Diagnostic Interview was used to assess attitudes and DSM-IV diagnoses. The attitudes referred to beliefs that the respondents would seek professional help when faced with a serious emotional problem, would feel comfortable talking about personal problems with a professional, would not be embarrassed if friends knew about the professional help, and respondents' perceived effectiveness of mental health care. Almost a third of the respondents held the view that professional care was worse than or equal to no help when faced with serious emotional problems. Female gender, being younger than 65 years of age, high income, living in Spain or Italy, presence of mood disorder and previous service use were associated with at least two of the four assessed attitudes towards mental health help-seeking. All four attitudes were significantly associated with mental health care use, also after adjustment for previous service use. The low perceived effectiveness of professional care calls for serious action aiming to improve the visibility and credibility of the mental health care sector

Cross-national epidemiology of DSM-IV major depressive episode

Background: Major depression is one of the leading causes of disability worldwide, yet epidemiologic data are not available for many countries, particularly low- to middle-income countries. In this paper, we present data on the prevalence, impairment and demographic correlates of depression from 18 high and low-to middle-income countries in the World Mental Health Survey Initiative. Methods: Major depressive episodes (MDE) as defined by the Diagnostic and Statistical Manual of Mental Disorders, fourth edition (DMS-IV) were evaluated in face-to-face interviews using the World Health Organization Composite International Diagnostic Interview (CIDI). Data from 18 countries were analyzed in this report (n = 89,037). All countries surveyed representative, population-based samples of adults. Results: The average lifetime and 12-month prevalence estimates of DSM-IV MDE were 14.6% and 5.5% in the ten high-income and 11.1% and 5.9% in the eight low- to middle-income countries. The average age of onset ascertained retrospectively was 25.7 in the high-income and 24.0 in low- to middle-income countries. Functional impairment was associated with recency of MDE. The female: male ratio was about 2: 1. In high-income countries, younger age was associated with higher 12-month prevalence; by contrast, in several low-to middle-income countries, older age was associated with greater likelihood of MDE. The strongest demographic correlate in high-income countries was being separated from a partner, and in low- to middle-income countries, was being divorced or widowed. Conclusions: MDE is a significant public-health concern across all regions of the world and is strongly linked to social conditions. Future research is needed to investigate the combination of demographic risk factors that are most strongly associated with MDE in the specific countries included in the WMH.(NIH/NIMH) United States National Institute of Mental Health[R01MH070884]John D. and Catherine T. MacArthur FoundationPfizer FoundationUSA Public Health Service[R13-MH066849]USA Public Health Service[R01-MH069864]USA Public Health Service[R01 DA016558](NIH) Fogarty International Center[FIRCA R03-TW006481]PAHO Pan American Health OrganizationEli Lilly & Company FoundationOrtho-McNeil Pharmaceutical, Inc.GlaxoSmithKlineSanofi-AventisBristol-Myers SquibbState of Brazil Research Foundation (FAPESP)[03/00204-3]Ministry of Social ProtectionEuropean Commission[QLG5-1999-01042]European Commission[SANCO 2004123]Piedmont Region (Italy)Fondo de Investigacion Sanitaria, Instituto de Salud Carlos III, Spain[FIS 00/0028]Spanish Ministerio de Ciencia y Tecnologia[SAF 2000-158-CE]Departament de Salut, Generalitat de Catalunya, SpainInstituto de Salud Carlos III[CIBER CB06/02/0046]Instituto de Salud Carlos III[RETICS RD06/0011 REM-TAP]Government of IndiaWHOMinistry of HealthIsrael National Institute for Health Policy and Health Services ResearchNational Insurance Institute of IsraelJapan Ministry of Health, Labour and Welfare[H13-Shogai-023]Japan Ministry of Health, Labour and Welfare[H14-Tokubetsu-026]Japan Ministry of Health, Labour and Welfare[H16-Kokoro-013]Lebanese Ministry of Public HealthWHO (Lebanon)(NIH) Fogarty International, anonymous private donations to IDRAAC, LebanonJanssen CilagEli LillyRocheNovartisNational Institute of Psychiatry Ramon de la Fuente[INPRFMDIES 4280]CNPq National Council on Science and Technology[CONACyT-G30544-H]PanAmerican Health Organization (PAHO)New Zealand Ministry of Health, Alcohol Advisory CouncilHealth Research Council(NIH/NIMH) USA National Institute of Mental Health[R01-MH059575](NIH/NIMH) USA National Institute of Mental Health[RO1-MH61905]National Institute of Drug AbuseSouth African Department of HealthUniversity of MichiganNational Institute of Mental Health (NIH/NIMH)[U01-MH60220]National Institute of Drug Abuse (NIDA)Substance Abuse and Mental Health Services Administration (SAMHSA)Robert Wood Johnson Foundation (RWJF)[044708]John W. Alden TrustsAnalysis Group Inc.Eli Lilly CompanyEPI-QJohnson & Johnson PharmaceuticalsOrtho-McNeil Janssen Scientific AffairsPfizer Inc.Shire USA, Inc

Search for direct production of charginos and neutralinos in events with three leptons and missing transverse momentum in √s = 7 TeV pp collisions with the ATLAS detector

A search for the direct production of charginos and neutralinos in final states with three electrons or muons and missing transverse momentum is presented. The analysis is based on 4.7 fb−1 of proton–proton collision data delivered by the Large Hadron Collider and recorded with the ATLAS detector. Observations are consistent with Standard Model expectations in three signal regions that are either depleted or enriched in Z-boson decays. Upper limits at 95% confidence level are set in R-parity conserving phenomenological minimal supersymmetric models and in simplified models, significantly extending previous results

Observation of associated near-side and away-side long-range correlations in √sNN=5.02 TeV proton-lead collisions with the ATLAS detector

Two-particle correlations in relative azimuthal angle (Δϕ) and pseudorapidity (Δη) are measured in √sNN=5.02  TeV p+Pb collisions using the ATLAS detector at the LHC. The measurements are performed using approximately 1  μb-1 of data as a function of transverse momentum (pT) and the transverse energy (ΣETPb) summed over 3.1<η<4.9 in the direction of the Pb beam. The correlation function, constructed from charged particles, exhibits a long-range (2<|Δη|<5) “near-side” (Δϕ∼0) correlation that grows rapidly with increasing ΣETPb. A long-range “away-side” (Δϕ∼π) correlation, obtained by subtracting the expected contributions from recoiling dijets and other sources estimated using events with small ΣETPb, is found to match the near-side correlation in magnitude, shape (in Δη and Δϕ) and ΣETPb dependence. The resultant Δϕ correlation is approximately symmetric about π/2, and is consistent with a dominant cos⁡2Δϕ modulation for all ΣETPb ranges and particle pT

Jet size dependence of single jet suppression in lead-lead collisions at sqrt(s(NN)) = 2.76 TeV with the ATLAS detector at the LHC

Measurements of inclusive jet suppression in heavy ion collisions at the LHC provide direct sensitivity to the physics of jet quenching. In a sample of lead-lead collisions at sqrt(s) = 2.76 TeV corresponding to an integrated luminosity of approximately 7 inverse microbarns, ATLAS has measured jets with a calorimeter over the pseudorapidity interval |eta| < 2.1 and over the transverse momentum range 38 < pT < 210 GeV. Jets were reconstructed using the anti-kt algorithm with values for the distance parameter that determines the nominal jet radius of R = 0.2, 0.3, 0.4 and 0.5. The centrality dependence of the jet yield is characterized by the jet "central-to-peripheral ratio," Rcp. Jet production is found to be suppressed by approximately a factor of two in the 10% most central collisions relative to peripheral collisions. Rcp varies smoothly with centrality as characterized by the number of participating nucleons. The observed suppression is only weakly dependent on jet radius and transverse momentum. These results provide the first direct measurement of inclusive jet suppression in heavy ion collisions and complement previous measurements of dijet transverse energy imbalance at the LHC.Comment: 15 pages plus author list (30 pages total), 8 figures, 2 tables, submitted to Physics Letters B. All figures including auxiliary figures are available at http://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/HION-2011-02

Measurement of the cross-section of high transverse momentum vector bosons reconstructed as single jets and studies of jet substructure in pp collisions at √s = 7 TeV with the ATLAS detector

This paper presents a measurement of the cross-section for high transverse momentum W and Z bosons produced in pp collisions and decaying to all-hadronic final states. The data used in the analysis were recorded by the ATLAS detector at the CERN Large Hadron Collider at a centre-of-mass energy of √s = 7 TeV;{\rm Te}{\rm V}$and correspond to an integrated luminosity of$4.6\;{\rm f}{{{\rm b}}^{-1}}$. The measurement is performed by reconstructing the boosted W or Z bosons in single jets. The reconstructed jet mass is used to identify the W and Z bosons, and a jet substructure method based on energy cluster information in the jet centre-of-mass frame is used to suppress the large multi-jet background. The cross-section for events with a hadronically decaying W or Z boson, with transverse momentum${{p}_{{\rm T}}}\gt 320\;{\rm Ge}{\rm V}$and pseudorapidity$|\eta |\lt 1.9$, is measured to be${{\sigma }_{W+Z}}=8.5\pm 1.7$ pb and is compared to next-to-leading-order calculations. The selected events are further used to study jet grooming techniques