P3 microengine development at Washington State University.

There is a pressing need for miniaturized power systems for a variety of applications requiring a long life in the field of operations. Such power systems are required to be capable of providing power for months to years of operation, which all but eliminates battery technologies and technologies that bring their own fuel systems (except for nuclear fuel systems, which have their own drawbacks) due to constraints of having the all of the chemical fuel necessary for the entire life of the operational run available at the starting point of the operation. Alternatively, harvesting energy directly from the local environment obviates this need for bringing along all of the fuel necessary for operation. Instead, locally available energy, either in the form of chemical, thermal, light, or motion can be harvested and converted into electrical energy for use in sensor applications. The work from this LDRD is focused on developing a thermal engine that can take scavenged thermal gradients and convert them into direct electrical energy. The converter system is a MEMS based external combustion engine that uses a modified Stirling cycle to generate mechanical work on a piezoelectric generator. This piezoelectric generator then produced an AC voltage and current that can be delivered into an external load. The MEMS engine works on the conversion of a two phase working fluid trapped between two deformable membranes. As heat is added to the system, the liquid working fluid is converted to a gas, which exerts pneumatic pressure on the membranes, expanding them outward. This outward expansion continues after the heat input is removed when the engine is operated at resonance, since the membrane is expanded further due to inertial forces. Finally, the engine cools and heat rejection is accomplished through the membranes, closing the thermodynamic cycle. A piezoelectric generator stack is deposited on one of the membranes, and this generator extracts the strain energy work from the membrane expansion and generates electrical work. The overall system is pulsed by an electrical heater to generate the input heat pulse. Currently, the system has a resonant frequency that is in the low kilohertz regime, but operations under a dynamic damping have demonstrated operation at resonance and the existence of an open mechanical cycle of heat addition, expansion, and heat rejection. Power generation of direct thermal-to-electrical conversion show a 1.45W, 6mJ heat pulse can generate a 0.8 {micro}W power output pulse, and continuous operation generates a sustained power output of 0.8 {micro}W at 240Hz. Future improvements in the device will allow active heat rejection, allowing resonance with external damping to improve the thermal to electrical power efficiency

Microspatial variability in community structure and photophysiology of calcified macroalgal microbiomes revealed by coupling of hyperspectral and high-resolution fluorescence imaging

This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/. The attached file is the published version of the article

High acceptance of home-based HIV counseling and testing in an urban community setting in Uganda

<p>Abstract</p> <p>Background</p> <p>HIV testing is a key component of prevention and an entry point into HIV/AIDS treatment and care however, coverage and access to testing remains low in Uganda. Home-Based HIV Counseling and Testing (HBHCT) has potential to increase access and early identification of unknown HIV/AIDS disease. This study investigated the level of acceptance of Home-Based HIV Counseling and Testing (HBHCT), the HIV sero-prevalence and the factors associated with acceptance of HBHCT in an urban setting.</p> <p>Methods</p> <p>A cross-sectional house-to-house survey was conducted in Rubaga division of Kampala from January-June 2009. Residents aged ≥ 15 years were interviewed and tested for HIV by trained nurse-counselors using the national standard guidelines. Acceptance of HBHCT was defined as consenting, taking the HIV test and receipt of results offered during the home visit. Multivariable logistic regression analysis was performed to determine significant factors associated with acceptance of HBHCT.</p> <p>Results</p> <p>We enrolled 588 participants, 408 (69%, 95% CI: 66%-73%) accepted testing. After adjusting for confounding, being male (adj. OR 1.65; 95%CI 1.03, 2.73), age 25-34 (adj. OR 0.63; 95% CI 0.40, 0.94) and ≥35 years (adj. OR 0.30; 95%CI 0.17, 0.56), being previously married (adj. OR 3.22; 95%CI 1.49, 6.98) and previous HIV testing (adj. OR 0.50; 95%CI 0.30, 0.74) were significantly associated with HBHCT acceptance. Of 408 who took the test, 30 (7.4%, 95% CI: 4.8%- 9.9%) previously unknown HIV positive individuals were identified and linked to HIV care.</p> <p>Conclusions</p> <p>Acceptance of home-based counseling and testing was relatively high in this urban setting. This strategy provided access to HIV testing for previously untested and unknown HIV-infected individuals in the community. Age, sex, marital status and previous HIV test history are important factors that may be considered when designing programs for home-based HIV testing in urban settings in Uganda.</p

Range dependent processing of visual numerosity: similarities across vision and haptics

‘Subitizing’ refers to fast and accurate judgement of small numerosities, whereas for larger numerosities either counting or estimation are used. Counting is slow and precise, whereas estimation is fast but imprecise. In this study consisting of five experiments we investigated if and how the numerosity judgement process is affected by the relative spacing between the presented numerosities. To this end we let subjects judge the number of dots presented on a screen and recorded their response times. Our results show that subjects switch from counting to estimation if the relative differences between subsequent numerosities are large (a factor of 2), but that numerosity judgement in the subitizing range was still faster. We also show this fast performance for small numerosities only occurred when numerosity information is present. This indicates this is typical for number processing and not magnitude estimation in general. Furthermore, comparison with a previous haptic study suggests similar processing in numerosity judgement through haptics and vision

Measurement of the inclusive and dijet cross-sections of b-jets in pp collisions at sqrt(s) = 7 TeV with the ATLAS detector

The inclusive and dijet production cross-sections have been measured for jets containing b-hadrons (b-jets) in proton-proton collisions at a centre-of-mass energy of sqrt(s) = 7 TeV, using the ATLAS detector at the LHC. The measurements use data corresponding to an integrated luminosity of 34 pb^-1. The b-jets are identified using either a lifetime-based method, where secondary decay vertices of b-hadrons in jets are reconstructed using information from the tracking detectors, or a muon-based method where the presence of a muon is used to identify semileptonic decays of b-hadrons inside jets. The inclusive b-jet cross-section is measured as a function of transverse momentum in the range 20 < pT < 400 GeV and rapidity in the range |y| < 2.1. The bbbar-dijet cross-section is measured as a function of the dijet invariant mass in the range 110 < m_jj < 760 GeV, the azimuthal angle difference between the two jets and the angular variable chi in two dijet mass regions. The results are compared with next-to-leading-order QCD predictions. Good agreement is observed between the measured cross-sections and the predictions obtained using POWHEG + Pythia. MC@NLO + Herwig shows good agreement with the measured bbbar-dijet cross-section. However, it does not reproduce the measured inclusive cross-section well, particularly for central b-jets with large transverse momenta.Comment: 10 pages plus author list (21 pages total), 8 figures, 1 table, final version published in European Physical Journal

Search for direct pair production of the top squark in all-hadronic final states in proton-proton collisions at s√=8 TeV with the ATLAS detector

The results of a search for direct pair production of the scalar partner to the top quark using an integrated luminosity of 20.1fb−1 of proton–proton collision data at √s = 8 TeV recorded with the ATLAS detector at the LHC are reported. The top squark is assumed to decay via t˜→tχ˜01 or t˜→ bχ˜±1 →bW(∗)χ˜01 , where χ˜01 (χ˜±1 ) denotes the lightest neutralino (chargino) in supersymmetric models. The search targets a fully-hadronic final state in events with four or more jets and large missing transverse momentum. No significant excess over the Standard Model background prediction is observed, and exclusion limits are reported in terms of the top squark and neutralino masses and as a function of the branching fraction of t˜ → tχ˜01 . For a branching fraction of 100%, top squark masses in the range 270–645 GeV are excluded for χ˜01 masses below 30 GeV. For a branching fraction of 50% to either t˜ → tχ˜01 or t˜ → bχ˜±1 , and assuming the χ˜±1 mass to be twice the χ˜01 mass, top squark masses in the range 250–550 GeV are excluded for χ˜01 masses below 60 GeV

Search for pair-produced long-lived neutral particles decaying to jets in the ATLAS hadronic calorimeter in ppcollisions at √s=8TeV

The ATLAS detector at the Large Hadron Collider at CERN is used to search for the decay of a scalar boson to a pair of long-lived particles, neutral under the Standard Model gauge group, in 20.3fb−1of data collected in proton–proton collisions at √s=8TeV. This search is sensitive to long-lived particles that decay to Standard Model particles producing jets at the outer edge of the ATLAS electromagnetic calorimeter or inside the hadronic calorimeter. No significant excess of events is observed. Limits are reported on the product of the scalar boson production cross section times branching ratio into long-lived neutral particles as a function of the proper lifetime of the particles. Limits are reported for boson masses from 100 GeVto 900 GeV, and a long-lived neutral particle mass from 10 GeVto 150 GeV

Search for new phenomena in final states with an energetic jet and large missing transverse momentum in pp collisions at √ s = 8 TeV with the ATLAS detector

Results of a search for new phenomena in final states with an energetic jet and large missing transverse momentum are reported. The search uses 20.3 fb−1 of √ s = 8 TeV data collected in 2012 with the ATLAS detector at the LHC. Events are required to have at least one jet with pT > 120 GeV and no leptons. Nine signal regions are considered with increasing missing transverse momentum requirements between Emiss T > 150 GeV and Emiss T > 700 GeV. Good agreement is observed between the number of events in data and Standard Model expectations. The results are translated into exclusion limits on models with either large extra spatial dimensions, pair production of weakly interacting dark matter candidates, or production of very light gravitinos in a gauge-mediated supersymmetric model. In addition, limits on the production of an invisibly decaying Higgs-like boson leading to similar topologies in the final state are presente

Performance of the CMS Cathode Strip Chambers with Cosmic Rays

The Cathode Strip Chambers (CSCs) constitute the primary muon tracking device in the CMS endcaps. Their performance has been evaluated using data taken during a cosmic ray run in fall 2008. Measured noise levels are low, with the number of noisy channels well below 1%. Coordinate resolution was measured for all types of chambers, and fall in the range 47 microns to 243 microns. The efficiencies for local charged track triggers, for hit and for segments reconstruction were measured, and are above 99%. The timing resolution per layer is approximately 5 ns

Randomized Controlled Trial of the Focus Parent Training for Toddlers with Autism: 1-Year Outcome

This randomized controlled trial compared results obtained after 12 months of nonintensive parent training plus care-as-usual and care-as-usual alone. The training focused on stimulating joint attention and language skills and was based on the intervention described by Drew et al. (Eur Child Adolesc Psychiatr 11:266–272, 2002). Seventy-five toddlers with autism spectrum disorder (65 autism, 10 PDD-NOS, mean age = 34.4 months, SD = 6.2) were enrolled. Analyses were conducted on a final sample of 67 children (lost to follow-up = 8). No significant intervention effects were found for any of the primary (language), secondary (global clinical improvement), or mediating (child engagement, early precursors of social communication, or parental skills) outcome variables, suggesting that the ‘Focus parent training’ was not of additional value to the more general care-as-usual