Evaluation and Validation of Organic Materials for Advanced Stirling Convertors (ASCs): Overview

Various organic materials are used as essential parts in Stirling Convertors for their unique properties and functionalities such as bonding, potting, sealing, thread locking, insulation, and lubrication. More efficient Advanced Stirling Convertors (ASC) are being developed for future space applications especially with a long mission cycle, sometimes up to 17 years, such as deep space exploration or lunar surface power or Mars rovers, and others. Thus, performance, durability, and reliability of those organics should be critically evaluated in every possible material-process-fabrication-service environment relations based on their mission specifications. In general, thermal stability, radiation hardness, outgassing, and material compatibility of the selected organics have been systematically evaluated while their process and fabrication conditions and procedures were being optimized. Service environment-simulated long term aging tests up to 4 years were performed as a function of temperature for durability assessment of the most critical organic material systems

Cooperative WebLab in chemical engineering between France and Brazil: Validation of the methodology

A WebLab is an experiment operated remotely via Internet. Besides the strictly technical aspects of such an experiment, which may contribute to the learning of Chemical Engineering fundamentals, there is also important feedback when teams of students of two different countries are working together: the WebLab becomes an intercultural experience, enhancing the communication skills of the students. A WebLab between Universidade Federal de São Carlos (DEQ/UFSCar) and the Ecole Nationale Supérieure d’Ingénieurs en Arts Chimiques et Technologiques (ENSIACET) is presented in this work. A mass transfer experiment in a bench scale reactor (stirred and aerated) had to be studied by mixed teams, thus emulating challenges that will be common in future working environments. In order to perform the experiment, students in Brazil and in France were put into groups. The students had to make decisions about the procedure for executing the experiments. All the students were able to control the equipment, no matter where they were physically. Students communicated using video conference software. The students' and teachers' opinions of this experience were very positive. This methodology is an important contribution to the education of engineers in a world integrated by modern communication technologies

Black Hole Formation by Sine-Gordon Solitons in Two-dimensional Dilaton Gravity

The CGHS model of two-dimensional dilaton gravity coupled to a sine-Gordon matter field is considered. The theory is exactly solvable classically, and the solutions of a kink and two-kink type solitons are studied in connection with black hole formation.Comment: 11 pages, no figures, revte

Detailed electronic structure studies on superconducting MgB2_2 and related compounds

In order to understand the unexpected superconducting behavior of MgB$_2$ compound we have made electronic structure calculations for MgB$_2$ and closely related systems. Our calculated Debye temperature from the elastic properties indicate that the average phonon frequency is very large in MgB$_2$ compared with other superconducting intermetallics and the exceptionally high $T_c$ in this material can be explained through BCS mechanism only if phonon softening occurs or the phonon modes are highly anisotropic. We identified a doubly-degenerate quasi-two dimensional key-energy band in the vicinity of $E_{F}$ along $\Gamma$-A direction of BZ which play an important role in deciding the superconducting behavior of this material. Based on this result, we have searched for similar kinds of electronic feature in a series of isoelectronic compounds such as BeB$_2$, CaB$_2$, SrB$_2$, LiBC and MgB$_2$C$_2$ and found that MgB$_2$C$_2$ is one potential material from the superconductivity point of view. There are contradictory experimental results regarding the anisotropy in the elastic properties of MgB$_2$ ranging from isotropic, moderately anisotropic to highly anisotropic. In order to settle this issue we have calculated the single crystal elastic constants for MgB$_2$ by the accurate full-potential method and derived the directional dependent linear compressibility, Young's modulus, shear modulus and relevant elastic properties. We have observed large anisotropy in the elastic properties. Our calculated polarized optical dielectric tensor shows highly anisotropic behavior even though it possesses isotropic transport property. MgB$_2$ possesses a mixed bonding character and this has been verified from density of states, charge density and crystal orbital Hamiltonian population analyses

A Multilevel Product Model for Simulation-Based Design of Mechanical Systems

This paper presents a multilevel product model that supports Simulation-Based Design (SBD) of mechanical systems, from pre liminary to detailed design stages The pnmary goal of the SBD is to achieve product designs featuring better performance and greater du rability and reliability through computer-based modeling, engineering analysis, and design trade-off. A Computer-Aided Design (CAD) model combined with engineering parameters and mathematical equations that simulate physical behavior of the mechanical system constitute its product model for SBD. For preliminary design, improvement of system performance, including dynamics and human factors, is usually the primary focus A CAD model with reasonably accurate physical parameters, such as mass properties of major components or assemblies, is defined as the base definition of the product model for SBD. A number of simulation models are derived from the base definition to sup port simulation of the mechanical system performance A parametric study can be conducted to search for design alternatives using dimen sion parameters created in the parameterized CAD model. The CAD model and base definition are then refined from the preliminary design stage to support intermediate designs. Intermediate designs will primarily focus on product subsystem performance. A product model is evolved by refining geometric representation of mechanical components in CAD, and expanding product assembly into parts and sub assemblies for further engineering analysis Component designs for performance, such as fatigue, mechanical reliability, and structural per formance, as well as maintainability are the primary focus in the detailed design stage. A detailed product model evolved from that of the previous design is needed In the detailed design stage, a systematic design trade-off method supports design improvement. A High Mobil ity Multi-Purpose Wheeled Vehicle (HMMWV) is employed to illustrate and demonstrate the proposed product model.Yeshttps://us.sagepub.com/en-us/nam/manuscript-submission-guideline

Proximity effect at superconducting Sn-Bi2Se3 interface

We have investigated the conductance spectra of Sn-Bi2Se3 interface junctions down to 250 mK and in different magnetic fields. A number of conductance anomalies were observed below the superconducting transition temperature of Sn, including a small gap different from that of Sn, and a zero-bias conductance peak growing up at lower temperatures. We discussed the possible origins of the smaller gap and the zero-bias conductance peak. These phenomena support that a proximity-effect-induced chiral superconducting phase is formed at the interface between the superconducting Sn and the strong spin-orbit coupling material Bi2Se3.Comment: 7 pages, 8 figure

Centrality Dependence of the High p_T Charged Hadron Suppression in Au+Au collisions at sqrt(s_NN) = 130 GeV

PHENIX has measured the centrality dependence of charged hadron p_T spectra from central Au+Au collisions at sqrt(s_NN)=130 GeV. The truncated mean p_T decreases with centrality for p_T > 2 GeV/c, indicating an apparent reduction of the contribution from hard scattering to high p_T hadron production. For central collisions the yield at high p_T is shown to be suppressed compared to binary nucleon-nucleon collision scaling of p+p data. This suppression is monotonically increasing with centrality, but most of the change occurs below 30% centrality, i.e. for collisions with less than about 140 participating nucleons. The observed p_T and centrality dependence is consistent with the particle production predicted by models including hard scattering and subsequent energy loss of the scattered partons in the dense matter created in the collisions.Comment: 7 pages text, LaTeX, 6 figures, 2 tables, 307 authors, resubmitted to Phys. Lett. B. Revised to address referee concerns. Plain text data tables for the points plotted in figures for this and previous PHENIX publications are publicly available at http://www.phenix.bnl.gov/phenix/WWW/run/phenix/papers.htm

Formation of dense partonic matter in relativistic nucleus-nucleus collisions at RHIC: Experimental evaluation by the PHENIX collaboration

Extensive experimental data from high-energy nucleus-nucleus collisions were recorded using the PHENIX detector at the Relativistic Heavy Ion Collider (RHIC). The comprehensive set of measurements from the first three years of RHIC operation includes charged particle multiplicities, transverse energy, yield ratios and spectra of identified hadrons in a wide range of transverse momenta (p_T), elliptic flow, two-particle correlations, non-statistical fluctuations, and suppression of particle production at high p_T. The results are examined with an emphasis on implications for the formation of a new state of dense matter. We find that the state of matter created at RHIC cannot be described in terms of ordinary color neutral hadrons.Comment: 510 authors, 127 pages text, 56 figures, 1 tables, LaTeX. Submitted to Nuclear Physics A as a regular article; v3 has minor changes in response to referee comments. Plain text data tables for the points plotted in figures for this and previous PHENIX publications are (or will be) publicly available at http://www.phenix.bnl.gov/papers.htm

Amygdala responses to emotional faces in twins discordant or concordant for the risk for anxiety and depression.

Background: Functional brain imaging studies have shown deviant amygdala responses to emotional stimuli in subjects suffering from anxiety and depressive disorder, but both hyperactivity and hypoactivity compared to healthy controls have been reported. To account for these discrepant findings, we hypothesize that genetic and environmental risk factors differently impact on amygdala functioning. Methods: To test this hypothesis, we assessed amygdala responses to an emotional faces paradigm during functional magnetic resonance imaging in monozygotic twin pairs discordant for the risk of anxiety and depression (n = 10 pairs) and in monozygotic twin pairs concordant for high (n = 7 pairs) or low (n = 15 pairs) risk for anxiety and depression. Results: Main effects (all faces vs. baseline) revealed robust bilateral amygdala activity across groups. In discordant twins, increased amygdala responses were found for negatively valenced stimuli (angry/anxious faces) in high-risk twins compared to their low-risk co-twins. In contrast, concordant high-risk pairs revealed blunted amygdala reactivity to both positive and negative faces compared with concordant low-risk pairs. Post-hoc analyses showed that these findings were independent of 5-HTTLPR genotype. Conclusions: Our findings indicate amygdala hyperactivity in subjects who are at high risk for anxiety and depression through environmental factors and amygdala hypoactivity in those at risk mainly through genetic factors. We suggest that this result reflects a difference in baseline amygdala activation in these groups. Future imaging studies on anxiety and depression should aim to avoid admixture of subjects who are at genetic risk with those at risk due to environmental factors. © 2008 Elsevier Inc. All rights reserved

Search for direct production of charginos and neutralinos in events with three leptons and missing transverse momentum in √s = 7 TeV pp collisions with the ATLAS detector

A search for the direct production of charginos and neutralinos in final states with three electrons or muons and missing transverse momentum is presented. The analysis is based on 4.7 fb−1 of proton–proton collision data delivered by the Large Hadron Collider and recorded with the ATLAS detector. Observations are consistent with Standard Model expectations in three signal regions that are either depleted or enriched in Z-boson decays. Upper limits at 95% confidence level are set in R-parity conserving phenomenological minimal supersymmetric models and in simplified models, significantly extending previous results