Scenarios in IPCC assessments: lessons from AR6 and opportunities for AR7

Scenarios have been an important integrating element in the Sixth Assessment Report (AR6) of the Intergovernmental Panel on Climate Change (IPCC) in the understanding of possible climate outcomes, impacts and risks, and mitigation futures. Integration supports a consistent, coherent assessment, new insights and the opportunity to address policy-relevant questions that would not be possible otherwise, for example, which impacts are unavoidable, which are reversible, what is a consistent remaining carbon budget to keep temperatures below a level and what would be a consistent route of action to achieve that goal. The AR6 builds on community frameworks that are developed to support a coherent use of scenarios across the assessment, yet their use in the assessment and the related timelines presented coordination challenges. From lessons within each Working Group (WG) assessment and the cross-WG experience, we present insights into the role of scenarios in future assessments, including the enhanced integration of impacts into scenarios, near-term information and community coordination efforts. Recommendations and opportunities are discussed for how scenarios can support strengthened consistency and policy relevance in the next IPCC assessment cycle

Question-answer sequences in survey interviews

Interaction analysis was used to analyze a total of 14,265 question-answer sequences of (Q-A Sequences) 80 questions that originated from two face-to-face and three telephone surveys. The analysis was directed towards the causes and effects of particular interactional problems. Our results showed that problematic respondent behavior is affected by the questionnaire design, whereas inadequate interviewer behavior is affected by respondent behavior, rather than directly by the questionnaire design. Two surveys used questions for which validating information was available. It appeared that the occurrence of such irregularities of interviewer and respondent behavior was related to the validity of the eventual responses. Explanations for the occurrence of problematic respondent behavior were proposed, concerning both cognitive and conversational factors, related to the wording of questions and response alternatives. © Springer 2006

Human macrophages differentiated in the presence of vitamin D3 restrict dengue virus infection and innate responses by downregulating mannose receptor expression

ABSTARCT: Severe dengue disease is associated with high viral loads and overproduction of pro-inflammatory cytokines, suggesting impairment in the control of dengue virus (DENV) and the mechanisms that regulate cytokine production. Vitamin D3 has been described as an important modulator of immune responses to several pathogens. Interestingly, increasing evidence has associated vitamin D with decreased DENV infection and early disease recovery, yet the molecular mechanisms whereby vitamin D reduces DENV infection are not well understood. METHODS AND PRINCIPAL FINDINGS: Macrophages represent important cell targets for DENV replication and consequently, they are key drivers of dengue disease. In this study we evaluated the effect of vitamin D3 on the differentiation of monocyte-derived macrophages (MDM) and their susceptibility and cytokine response to DENV. Our data demonstrate that MDM differentiated in the presence of vitamin D3 (D3-MDM) restrict DENV infection and moderate the classical inflammatory cytokine response. Mechanistically, vitamin D3-driven differentiation led to reduced surface expression of C-type lectins including the mannose receptor (MR, CD206) that is known to act as primary receptor for DENV attachment on macrophages and to trigger of immune signaling. Consequently, DENV bound less efficiently to vitamin D3-differentiated macrophages, leading to lower infection. Interestingly, IL-4 enhanced infection was reduced in D3-MDM by restriction of MR expression. Moreover, we detected moderate secretion of TNF-α, IL-1β, and IL-10 in D3-MDM, likely due to less MR engagement during DENV infection. CONCLUSIONS/SIGNIFICANCE: Our findings reveal a molecular mechanism by which vitamin D counteracts DENV infection and progression of severe disease, and indicates its potential relevance as a preventive or therapeutic candidate

DIS3 isoforms vary in their endoribonuclease activity and are differentially expressed within haematological cancers

DIS3 is the catalytic subunit of the exosome, a protein complex involved in the 3’ to 5’ degradation of RNAs. DIS3 is a highly conserved exoribonuclease, also known as Rrp44. Global sequencing studies have identified DIS3 as being mutated in a range of cancers, with a considerable incidence in multiple myeloma. In this work, we have identified two proteincoding isoforms of DIS3. Both isoforms are functionally relevant and result from alternative splicing. They differ from each other in the size of their N-terminal PIN domain, which has been shown to have endoribonuclease activity and tether DIS3 to the exosome. Isoform 1 encodes a full-length PIN domain, whereas the PIN domain of isoform 2 is shorter and is missing a segment with conserved amino-acids. We have carried out biochemical activity assays on both isoforms of full-length DIS3 as well as the isolated PIN domains. We find that isoform 2, despite missing part of the PIN domain, has greater endonuclease activity compared to isoform 1. Examination of the available structural information allows us to provide a hypothesis to explain this altered behaviour. Our results also show that multiple myeloma patient cells and all cancer cell lines tested have higher levels of isoform 1 compared to isoform 2 whereas Acute Myeloid Leukemia (AML) and chronic myelomonocytic leukaemia (CMML) patient cells and samples from healthy donors have similar levels of isoforms 1 and 2. Together, our data indicate that significant changes in the ratios of the two isoforms could be symptomatic of haematological cancers

An interlaboratory study of TEX86 and BIT analysis of sediments, extracts and standard mixtures.

Two commonly used proxies based on the distribution of glycerol dialkyl glycerol tetraethers (GDGTs) are the TEX86 (TetraEther indeX of 86 carbon atoms) paleothermometer for sea surface temperature reconstructions and the BIT (Branched Isoprenoid Tetraether) index for reconstructing soil organic matter input to the ocean. An initial round-robin study of two sediment extracts, in which 15 laboratories participated, showed relatively consistent TEX86 values (reproducibility ±3-4°C when translated to temperature) but a large spread in BIT measurements (reproducibility ±0.41 on a scale of 0-1). Here we report results of a second round-robin study with 35 laboratories in which three sediments, one sediment extract, and two mixtures of pure, isolated GDGTs were analyzed. The results for TEX86 and BIT index showed improvement compared to the previous round-robin study. The reproducibility, indicating interlaboratory variation, of TEX86 values ranged from 1.3 to 3.0°C when translated to temperature. These results are similar to those of other temperature proxies used in paleoceanography. Comparison of the results obtained from one of the three sediments showed that TEX86 and BIT indices are not significantly affected by interlaboratory differences in sediment extraction techniques. BIT values of the sediments and extracts were at the extremes of the index with values close to 0 or 1, and showed good reproducibility (ranging from 0.013 to 0.042). However, the measured BIT values for the two GDGT mixtures, with known molar ratios of crenarchaeol and branched GDGTs, had intermediate BIT values and showed poor reproducibility and a large overestimation of the "true" (i.e., molar-based) BIT index. The latter is likely due to, among other factors, the higher mass spectrometric response of branched GDGTs compared to crenarchaeol, which also varies among mass spectrometers. Correction for this different mass spectrometric response showed a considerable improvement in the reproducibility of BIT index measurements among laboratories, as well as a substantially improved estimation of molar-based BIT values. This suggests that standard mixtures should be used in order to obtain consistent, and molar-based, BIT values

Measurement of the View the tt production cross-section using eμ events with b-tagged jets in pp collisions at √s = 13 TeV with the ATLAS detector

This paper describes a measurement of the inclusive top quark pair production cross-section (σtt¯) with a data sample of 3.2 fb−1 of proton–proton collisions at a centre-of-mass energy of √s = 13 TeV, collected in 2015 by the ATLAS detector at the LHC. This measurement uses events with an opposite-charge electron–muon pair in the final state. Jets containing b-quarks are tagged using an algorithm based on track impact parameters and reconstructed secondary vertices. The numbers of events with exactly one and exactly two b-tagged jets are counted and used to determine simultaneously σtt¯ and the efficiency to reconstruct and b-tag a jet from a top quark decay, thereby minimising the associated systematic uncertainties. The cross-section is measured to be: σtt¯ = 818 ± 8 (stat) ± 27 (syst) ± 19 (lumi) ± 12 (beam) pb, where the four uncertainties arise from data statistics, experimental and theoretical systematic effects, the integrated luminosity and the LHC beam energy, giving a total relative uncertainty of 4.4%. The result is consistent with theoretical QCD calculations at next-to-next-to-leading order. A fiducial measurement corresponding to the experimental acceptance of the leptons is also presented

Search for TeV-scale gravity signatures in high-mass final states with leptons and jets with the ATLAS detector at sqrt [ s ] = 13TeV

A search for physics beyond the Standard Model, in final states with at least one high transverse momentum charged lepton (electron or muon) and two additional high transverse momentum leptons or jets, is performed using 3.2 fb−1 of proton–proton collision data recorded by the ATLAS detector at the Large Hadron Collider in 2015 at √s = 13 TeV. The upper end of the distribution of the scalar sum of the transverse momenta of leptons and jets is sensitive to the production of high-mass objects. No excess of events beyond Standard Model predictions is observed. Exclusion limits are set for models of microscopic black holes with two to six extra dimensions

The performance of the jet trigger for the ATLAS detector during 2011 data taking

The performance of the jet trigger for the ATLAS detector at the LHC during the 2011 data taking period is described. During 2011 the LHC provided proton–proton collisions with a centre-of-mass energy of 7 TeV and heavy ion collisions with a 2.76 TeV per nucleon–nucleon collision energy. The ATLAS trigger is a three level system designed to reduce the rate of events from the 40 MHz nominal maximum bunch crossing rate to the approximate 400 Hz which can be written to offline storage. The ATLAS jet trigger is the primary means for the online selection of events containing jets. Events are accepted by the trigger if they contain one or more jets above some transverse energy threshold. During 2011 data taking the jet trigger was fully efficient for jets with transverse energy above 25 GeV for triggers seeded randomly at Level 1. For triggers which require a jet to be identified at each of the three trigger levels, full efficiency is reached for offline jets with transverse energy above 60 GeV. Jets reconstructed in the final trigger level and corresponding to offline jets with transverse energy greater than 60 GeV, are reconstructed with a resolution in transverse energy with respect to offline jets, of better than 4 % in the central region and better than 2.5 % in the forward direction

Search for dark matter produced in association with a hadronically decaying vector boson in pp collisions at sqrt (s) = 13 TeV with the ATLAS detector

A search is presented for dark matter produced in association with a hadronically decaying W or Z boson using 3.2 fb−1 of pp collisions at View the MathML sources=13 TeV recorded by the ATLAS detector at the Large Hadron Collider. Events with a hadronic jet compatible with a W or Z boson and with large missing transverse momentum are analysed. The data are consistent with the Standard Model predictions and are interpreted in terms of both an effective field theory and a simplified model containing dark matter

Measurement of the cross section for isolated-photon plus jet production in pp collisions at √s=13 TeV using the ATLAS detector

The dynamics of isolated-photon production in association with a jet in proton–proton collisions at a centre-of-mass energy of 13 TeV are studied with the ATLAS detector at the LHC using a dataset with an integrated luminosity of 3.2 fb−1. Photons are required to have transverse energies above 125 GeV. Jets are identified using the anti- algorithm with radius parameter and required to have transverse momenta above 100 GeV. Measurements of isolated-photon plus jet cross sections are presented as functions of the leading-photon transverse energy, the leading-jet transverse momentum, the azimuthal angular separation between the photon and the jet, the photon–jet invariant mass and the scattering angle in the photon–jet centre-of-mass system. Tree-level plus parton-shower predictions from Sherpa and Pythia as well as next-to-leading-order QCD predictions from Jetphox and Sherpa are compared to the measurements