208 research outputs found

    CAUSES OF DROPOUTS (2011) AT PRIMARY SCHOOL LEVEL IN ZONE BEERWAH, DISTRICT BUDGAM, J&K

    Get PDF
    Dropout is the extent to which students fail to complete the school programmes. This main objective of this study was to find out the causes of dropouts at primary level in Zone Beerwah, District Budgam, J&K. it was found that they fail repeatedly in the examinations. They feel their parents are not interested in educating them. Their parents do not feel the necessity of educating all children in the family. There is lack of community participation in school activities.Keywords: Dropout, primary school, Beerwah, Budgam

    Boundary layer flow of an Eyring–Powell model fluid due to a stretching cylinder with variable viscosity

    Get PDF
    AbstractThe present investigation consists of an analytical treatment of a steady boundary layer flow of an Eyring–Powell model fluid due to a stretching cylinder with temperature dependent variable viscosity. The heat transfer analysis is also taken into account. Using usual similarity transformations the governing equations have been transformed into non-linear ordinary differential equations and are solved by a powerful technique; the homotopy analysis method. Two models of variable viscosity, namely, Reynolds’ and Vogel’s are considered. The convergence is carefully checked by plotting h-curves. The emerging parameters intrinsic to the problem are discussed through graphs

    Aluminosilicates and yeast-based mycotoxin binders: Their ameliorated effects on growth, immunity and serum chemistry in broilers fed aflatoxin and ochratoxin

    Get PDF
    The aim of this study was to evaluate the effects of commercial toxin binders on growth performance, organ morphology, immunity and serum biochemistry in broilers. Dietary treatments consisted of the negative control (NC): experimental diet with aflatoxin B1 <20 parts per billion (ppb), ochratoxin A (OTA) <5 ppb; control (C) experimental diet without toxin binder; Z1: toxin binder 1 g/kg of zeta plus; Z2: toxin binder 2 g/kg of zeta plus; TX1: toxin binder 1 g/kg of Toxfin Dry; and TX2: toxin binder 2 g/kg of Toxfin Dry). Except for NC, all diets contained 57 ppb aflatoxin B1 and 23 ppb ochratoxin A. Feed intake was higher in the TX1, TX2, NC, Z2 and Z1 treatments than in the control. Weight gain was higher in Z2, TX2, Z1, TX1 and NC than in C. Feed conversion ratio (FCR) was poor in C. The control had the highest liver weight, though the weights of the spleen, kidneys and hearts of the birds were similar in all treatments. Gizzard weight, thymus weight, and bursa of Fabricius were lowest in C. The weight of the pancreas was similar among treatments. The antibody titres against new castle disease were higher in treatments Z2, Z1, TX2, TX1 and NC than in C. Urea and creatinine concentrations, and aspartate aminotransferase activity in serum were similar among treatments, whereas the serum alanine transaminase activity was higher in C than in Z1, TX1, TX2, Z2 and NC. It was concluded that growth rate, FCR and immunity indices were improved in broilers fed toxin binder. At lower levels of mycotoxin in feed, 1 g/kg of toxin binder (clay based or yeast based) was sufficient to ameliorate the adverse effects of aflatoxin B1 and OTA, whereas at higher levels of mycotoxins, supplementation of toxin binder should be increased.Keywords: alanine aminotransferase, aspartate aminotransferase, carcass characteristics, growth performance, toxin binders, urea, creatinin

    Mixed convection dissipative viscous fluid flow over a rotating cone by way of variable viscosity and thermal conductivity

    Get PDF
    AbstractThe effects of temperature-dependent viscosity and thermal conductivity on the flow and heat transfer characteristics of a viscous fluid over a rotating vertical cone are premeditated. The properties of the fluid are assumed to be constant except for the density difference with the temperature. Also, the effect of viscous dissipation is considered in the energy equation. The highly nonlinear unsteady equations are converted into a system of nonlinear ordinary differential equations which is solved by using Homotopy analysis method. The interesting findings for different pertinent parameters on momentum, energy, skin friction coefficient and local Nusselt number are demonstrated in the form of graphs and tables. A comparison has been made with literature as a limiting case of the well-chosen unsteady problem

    Effect logs of double diffusion on MHD Prandtl nano fluid adjacent to stretching surface by way of numerical approach

    Get PDF
    AbstractThe current communication is carried to contemplate the unique and novel characteristics of nanofluids by constructing formulation of Prandtl fluid model. The fascinating aspects of thermo diffusion effects are also accounted in this communication. Mathematical modelling is performed by employing boundary layer approach. Afterwards, similarity variables are selected to convert dimensional non-linear system into dimensionless expressions. The solution of governing dimensionless problem is executed by shooting method (SM). Graphical evaluation is displayed to depict the intrinsic behavior of embedded parameters on dimensionless velocity, temperature, solutal concentration and nanoparticle concentration profiles. Furthermore, the numerical variation for skin friction coefficient, local Nusselt number, Sherwood number and nano Sherwood number is scrutinized through tables. The assurance of current analysis is affirmed by developing comparison with previous findings available in literature, which sets a benchmark for implementation of computational approach. It is inferred from the computation that concentration profile increases whereas Sherwood number decreases for progressive values of Dufour solutal number

    Analysis of Newtonian heating and higher-order chemical reaction on a Maxwell nanofluid in a rotating frame with gyrotactic microorganisms and variable heat source/sink

    Get PDF
    The goal of this study is to investigate the rotating Maxwell nanoliquid flow incorporating gyrotactic microbes with Newtonian heating and irregular heat source sink. The motion of the flow is induced due to linearly unidirectional elongated surface. The uniqueness of the flow is enhanced by the inclusion of additional phenomenon of higher order chemical reaction incorporated with Darcy Forchheimer flow, Fourier and Fick law. Numerical solution of the formulated problem is developed via bvp4c function in MATLAB. The influence of the embroiled parameters on the flow distribution is demonstrated through various graphs and tables. It is noticed that fluid velocity declines on incrementing the rotation parameter. An upsurge in thermal field is portrayed on augmenting the Newtonian heating. Comparative analysis of the results of the proposed model with previous published research is included which confirms the validity of the current model

    Exercise Capacity in Patients With Obstructive Hypertrophic Cardiomyopathy:SEQUOIA-HCM Baseline Characteristics and Study Design

    Get PDF
    Patients with obstructive hypertrophic cardiomyopathy (oHCM) have increased risk of arrhythmia, stroke, heart failure, and sudden death. Contemporary management of oHCM has decreased annual hospitalization and mortality rates, yet patients have worsening health-related quality of life due to impaired exercise capacity and persistent residual symptoms. Here we consider the design of clinical trials evaluating potential oHCM therapies in the context of SEQUOIA-HCM (Safety, Efficacy, and Quantitative Understanding of Obstruction Impact of Aficamten in HCM). This large, phase 3 trial is now fully enrolled (N = 282). Baseline characteristics reflect an ethnically diverse population with characteristics typical of patients encountered clinically with substantial functional and symptom burden. The study will assess the effect of aficamten vs placebo, in addition to standard-of-care medications, on functional capacity and symptoms over 24 weeks. Future clinical trials could model the approach in SEQUOIA-HCM to evaluate the effect of potential therapies on the burden of oHCM. (Safety, Efficacy, and Quantitative Understanding of Obstruction Impact of Aficamten in HCM [SEQUOIA-HCM]; NCT05186818).</p

    Search for jet extinction in the inclusive jet-pT spectrum from proton-proton collisions at s=8 TeV

    Get PDF
    Published by the American Physical Society under the terms of the Creative Commons Attribution 3.0 License. Further distribution of this work must maintain attribution to the author(s) and the published articles title, journal citation, and DOI.The first search at the LHC for the extinction of QCD jet production is presented, using data collected with the CMS detector corresponding to an integrated luminosity of 10.7  fb−1 of proton-proton collisions at a center-of-mass energy of 8 TeV. The extinction model studied in this analysis is motivated by the search for signatures of strong gravity at the TeV scale (terascale gravity) and assumes the existence of string couplings in the strong-coupling limit. In this limit, the string model predicts the suppression of all high-transverse-momentum standard model processes, including jet production, beyond a certain energy scale. To test this prediction, the measured transverse-momentum spectrum is compared to the theoretical prediction of the standard model. No significant deficit of events is found at high transverse momentum. A 95% confidence level lower limit of 3.3 TeV is set on the extinction mass scale

    Global, regional, and national age-sex-specific mortality and life expectancy, 1950–2017: a systematic analysis for the Global Burden of Disease Study 2017

    Get PDF
    BACKGROUND: Assessments of age-specific mortality and life expectancy have been done by the UN Population Division, Department of Economics and Social Affairs (UNPOP), the United States Census Bureau, WHO, and as part of previous iterations of the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD). Previous iterations of the GBD used population estimates from UNPOP, which were not derived in a way that was internally consistent with the estimates of the numbers of deaths in the GBD. The present iteration of the GBD, GBD 2017, improves on previous assessments and provides timely estimates of the mortality experience of populations globally. METHODS: The GBD uses all available data to produce estimates of mortality rates between 1950 and 2017 for 23 age groups, both sexes, and 918 locations, including 195 countries and territories and subnational locations for 16 countries. Data used include vital registration systems, sample registration systems, household surveys (complete birth histories, summary birth histories, sibling histories), censuses (summary birth histories, household deaths), and Demographic Surveillance Sites. In total, this analysis used 8259 data sources. Estimates of the probability of death between birth and the age of 5 years and between ages 15 and 60 years are generated and then input into a model life table system to produce complete life tables for all locations and years. Fatal discontinuities and mortality due to HIV/AIDS are analysed separately and then incorporated into the estimation. We analyse the relationship between age-specific mortality and development status using the Socio-demographic Index, a composite measure based on fertility under the age of 25 years, education, and income. There are four main methodological improvements in GBD 2017 compared with GBD 2016: 622 additional data sources have been incorporated; new estimates of population, generated by the GBD study, are used; statistical methods used in different components of the analysis have been further standardised and improved; and the analysis has been extended backwards in time by two decades to start in 1950. FINDINGS: Globally, 18·7% (95% uncertainty interval 18·4–19·0) of deaths were registered in 1950 and that proportion has been steadily increasing since, with 58·8% (58·2–59·3) of all deaths being registered in 2015. At the global level, between 1950 and 2017, life expectancy increased from 48·1 years (46·5–49·6) to 70·5 years (70·1–70·8) for men and from 52·9 years (51·7–54·0) to 75·6 years (75·3–75·9) for women. Despite this overall progress, there remains substantial variation in life expectancy at birth in 2017, which ranges from 49·1 years (46·5–51·7) for men in the Central African Republic to 87·6 years (86·9–88·1) among women in Singapore. The greatest progress across age groups was for children younger than 5 years; under-5 mortality dropped from 216·0 deaths (196·3–238·1) per 1000 livebirths in 1950 to 38·9 deaths (35·6–42·83) per 1000 livebirths in 2017, with huge reductions across countries. Nevertheless, there were still 5·4 million (5·2–5·6) deaths among children younger than 5 years in the world in 2017. Progress has been less pronounced and more variable for adults, especially for adult males, who had stagnant or increasing mortality rates in several countries. The gap between male and female life expectancy between 1950 and 2017, while relatively stable at the global level, shows distinctive patterns across super-regions and has consistently been the largest in central Europe, eastern Europe, and central Asia, and smallest in south Asia. Performance was also variable across countries and time in observed mortality rates compared with those expected on the basis of development. INTERPRETATION: This analysis of age-sex-specific mortality shows that there are remarkably complex patterns in population mortality across countries. The findings of this study highlight global successes, such as the large decline in under-5 mortality, which reflects significant local, national, and global commitment and investment over several decades. However, they also bring attention to mortality patterns that are a cause for concern, particularly among adult men and, to a lesser extent, women, whose mortality rates have stagnated in many countries over the time period of this study, and in some cases are increasing

    Global burden and strength of evidence for 88 risk factors in 204 countries and 811 subnational locations, 1990–2021: a systematic analysis for the Global Burden of Disease Study 2021

    Get PDF
    Background: Understanding the health consequences associated with exposure to risk factors is necessary to inform public health policy and practice. To systematically quantify the contributions of risk factor exposures to specific health outcomes, the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2021 aims to provide comprehensive estimates of exposure levels, relative health risks, and attributable burden of disease for 88 risk factors in 204 countries and territories and 811 subnational locations, from 1990 to 2021. Methods: The GBD 2021 risk factor analysis used data from 54 561 total distinct sources to produce epidemiological estimates for 88 risk factors and their associated health outcomes for a total of 631 risk–outcome pairs. Pairs were included on the basis of data-driven determination of a risk–outcome association. Age-sex-location-year-specific estimates were generated at global, regional, and national levels. Our approach followed the comparative risk assessment framework predicated on a causal web of hierarchically organised, potentially combinative, modifiable risks. Relative risks (RRs) of a given outcome occurring as a function of risk factor exposure were estimated separately for each risk–outcome pair, and summary exposure values (SEVs), representing risk-weighted exposure prevalence, and theoretical minimum risk exposure levels (TMRELs) were estimated for each risk factor. These estimates were used to calculate the population attributable fraction (PAF; ie, the proportional change in health risk that would occur if exposure to a risk factor were reduced to the TMREL). The product of PAFs and disease burden associated with a given outcome, measured in disability-adjusted life-years (DALYs), yielded measures of attributable burden (ie, the proportion of total disease burden attributable to a particular risk factor or combination of risk factors). Adjustments for mediation were applied to account for relationships involving risk factors that act indirectly on outcomes via intermediate risks. Attributable burden estimates were stratified by Socio-demographic Index (SDI) quintile and presented as counts, age-standardised rates, and rankings. To complement estimates of RR and attributable burden, newly developed burden of proof risk function (BPRF) methods were applied to yield supplementary, conservative interpretations of risk–outcome associations based on the consistency of underlying evidence, accounting for unexplained heterogeneity between input data from different studies. Estimates reported represent the mean value across 500 draws from the estimate's distribution, with 95% uncertainty intervals (UIs) calculated as the 2·5th and 97·5th percentile values across the draws. Findings: Among the specific risk factors analysed for this study, particulate matter air pollution was the leading contributor to the global disease burden in 2021, contributing 8·0% (95% UI 6·7–9·4) of total DALYs, followed by high systolic blood pressure (SBP; 7·8% [6·4–9·2]), smoking (5·7% [4·7–6·8]), low birthweight and short gestation (5·6% [4·8–6·3]), and high fasting plasma glucose (FPG; 5·4% [4·8–6·0]). For younger demographics (ie, those aged 0–4 years and 5–14 years), risks such as low birthweight and short gestation and unsafe water, sanitation, and handwashing (WaSH) were among the leading risk factors, while for older age groups, metabolic risks such as high SBP, high body-mass index (BMI), high FPG, and high LDL cholesterol had a greater impact. From 2000 to 2021, there was an observable shift in global health challenges, marked by a decline in the number of all-age DALYs broadly attributable to behavioural risks (decrease of 20·7% [13·9–27·7]) and environmental and occupational risks (decrease of 22·0% [15·5–28·8]), coupled with a 49·4% (42·3–56·9) increase in DALYs attributable to metabolic risks, all reflecting ageing populations and changing lifestyles on a global scale. Age-standardised global DALY rates attributable to high BMI and high FPG rose considerably (15·7% [9·9–21·7] for high BMI and 7·9% [3·3–12·9] for high FPG) over this period, with exposure to these risks increasing annually at rates of 1·8% (1·6–1·9) for high BMI and 1·3% (1·1–1·5) for high FPG. By contrast, the global risk-attributable burden and exposure to many other risk factors declined, notably for risks such as child growth failure and unsafe water source, with age-standardised attributable DALYs decreasing by 71·5% (64·4–78·8) for child growth failure and 66·3% (60·2–72·0) for unsafe water source. We separated risk factors into three groups according to trajectory over time: those with a decreasing attributable burden, due largely to declining risk exposure (eg, diet high in trans-fat and household air pollution) but also to proportionally smaller child and youth populations (eg, child and maternal malnutrition); those for which the burden increased moderately in spite of declining risk exposure, due largely to population ageing (eg, smoking); and those for which the burden increased considerably due to both increasing risk exposure and population ageing (eg, ambient particulate matter air pollution, high BMI, high FPG, and high SBP). Interpretation: Substantial progress has been made in reducing the global disease burden attributable to a range of risk factors, particularly those related to maternal and child health, WaSH, and household air pollution. Maintaining efforts to minimise the impact of these risk factors, especially in low SDI locations, is necessary to sustain progress. Successes in moderating the smoking-related burden by reducing risk exposure highlight the need to advance policies that reduce exposure to other leading risk factors such as ambient particulate matter air pollution and high SBP. Troubling increases in high FPG, high BMI, and other risk factors related to obesity and metabolic syndrome indicate an urgent need to identify and implement interventions. Funding: Bill & Melinda Gates Foundation
    corecore