Advanced code-division multiplexers for superconducting detector arrays

Multiplexers based on the modulation of superconducting quantum interference devices are now regularly used in multi-kilopixel arrays of superconducting detectors for astrophysics, cosmology, and materials analysis. Over the next decade, much larger arrays will be needed. These larger arrays require new modulation techniques and compact multiplexer elements that fit within each pixel. We present a new in-focal-plane code-division multiplexer that provides multiplexing elements with the required scalability. This code-division multiplexer uses compact lithographic modulation elements that simultaneously multiplex both signal outputs and superconducting transition-edge sensor (TES) detector bias voltages. It eliminates the shunt resistor used to voltage bias TES detectors, greatly reduces power dissipation, allows different dc bias voltages for each TES, and makes all elements sufficiently compact to fit inside the detector pixel area. These in-focal-plane code-division multiplexers can be combined with multi-gigahertz readout based on superconducting microresonators to scale to even larger arrays.Comment: 8 pages, 3 figures, presented at the 14th International Workshop on Low Temperature Detectors, Heidelberg University, August 1-5, 2011, proceedings to be published in the Journal of Low Temperature Physic

Low Q^2 Jet Production at HERA and Virtual Photon Structure

The transition between photoproduction and deep-inelastic scattering is investigated in jet production at the HERA ep collider, using data collected by the H1 experiment. Measurements of the differential inclusive jet cross-sections dsigep/dEt* and dsigmep/deta*, where Et* and eta* are the transverse energy and the pseudorapidity of the jets in the virtual photon-proton centre of mass frame, are presented for 0 < Q2 < 49 GeV2 and 0.3 < y < 0.6. The interpretation of the results in terms of the structure of the virtual photon is discussed. The data are best described by QCD calculations which include a partonic structure of the virtual photon that evolves with Q2.Comment: 20 pages, 5 Figure

Hadron Production in Diffractive Deep-Inelastic Scattering

Characteristics of hadron production in diffractive deep-inelastic positron-proton scattering are studied using data collected in 1994 by the H1 experiment at HERA. The following distributions are measured in the centre-of-mass frame of the photon dissociation system: the hadronic energy flow, the Feynman-x (x_F) variable for charged particles, the squared transverse momentum of charged particles (p_T^{*2}), and the mean p_T^{*2} as a function of x_F. These distributions are compared with results in the gamma^* p centre-of-mass frame from inclusive deep-inelastic scattering in the fixed-target experiment EMC, and also with the predictions of several Monte Carlo calculations. The data are consistent with a picture in which the partonic structure of the diffractive exchange is dominated at low Q^2 by hard gluons.Comment: 16 pages, 6 figures, submitted to Phys. Lett.

Energy Flow in the Hadronic Final State of Diffractive and Non-Diffractive Deep-Inelastic Scattering at HERA

An investigation of the hadronic final state in diffractive and non--diffractive deep--inelastic electron--proton scattering at HERA is presented, where diffractive data are selected experimentally by demanding a large gap in pseudo --rapidity around the proton remnant direction. The transverse energy flow in the hadronic final state is evaluated using a set of estimators which quantify topological properties. Using available Monte Carlo QCD calculations, it is demonstrated that the final state in diffractive DIS exhibits the features expected if the interaction is interpreted as the scattering of an electron off a current quark with associated effects of perturbative QCD. A model in which deep--inelastic diffraction is taken to be the exchange of a pomeron with partonic structure is found to reproduce the measurements well. Models for deep--inelastic $ep$ scattering, in which a sizeable diffractive contribution is present because of non--perturbative effects in the production of the hadronic final state, reproduce the general tendencies of the data but in all give a worse description.Comment: 22 pages, latex, 6 Figures appended as uuencoded fil

A Search for Selectrons and Squarks at HERA

Data from electron-proton collisions at a center-of-mass energy of 300 GeV are used for a search for selectrons and squarks within the framework of the minimal supersymmetric model. The decays of selectrons and squarks into the lightest supersymmetric particle lead to final states with an electron and hadrons accompanied by large missing energy and transverse momentum. No signal is found and new bounds on the existence of these particles are derived. At 95% confidence level the excluded region extends to 65 GeV for selectron and squark masses, and to 40 GeV for the mass of the lightest supersymmetric particle.Comment: 13 pages, latex, 6 Figure

A Measurement of the Proton Structure Function F ⁣2(x,Q2)F_{\!2}(x,Q^2)

A measurement of the proton structure function $F_{\!2}(x,Q^2)$ is reported for momentum transfer squared $Q^2$ between 4.5 $GeV^2$ and 1600 $GeV^2$ and for Bjorken $x$ between $1.8\cdot10^{-4}$ and 0.13 using data collected by the HERA experiment H1 in 1993. It is observed that $F_{\!2}$ increases significantly with decreasing $x$, confirming our previous measurement made with one tenth of the data available in this analysis. The $Q^2$ dependence is approximately logarithmic over the full kinematic range covered. The subsample of deep inelastic events with a large pseudo-rapidity gap in the hadronic energy flow close to the proton remnant is used to measure the "diffractive" contribution to $F_{\!2}$.Comment: 32 pages, ps, appended as compressed, uuencoded fil

Large expert-curated database for benchmarking document similarity detection in biomedical literature search

Document recommendation systems for locating relevant literature have mostly relied on methods developed a decade ago. This is largely due to the lack of a large offline gold-standard benchmark of relevant documents that cover a variety of research fields such that newly developed literature search techniques can be compared, improved and translated into practice. To overcome this bottleneck, we have established the RElevant LIterature SearcH consortium consisting of more than 1500 scientists from 84 countries, who have collectively annotated the relevance of over 180 000 PubMed-listed articles with regard to their respective seed (input) article/s. The majority of annotations were contributed by highly experienced, original authors of the seed articles. The collected data cover 76% of all unique PubMed Medical Subject Headings descriptors. No systematic biases were observed across different experience levels, research fields or time spent on annotations. More importantly, annotations of the same document pairs contributed by different scientists were highly concordant. We further show that the three representative baseline methods used to generate recommended articles for evaluation (Okapi Best Matching 25, Term Frequency-Inverse Document Frequency and PubMed Related Articles) had similar overall performances. Additionally, we found that these methods each tend to produce distinct collections of recommended articles, suggesting that a hybrid method may be required to completely capture all relevant articles. The established database server located at https://relishdb.ict.griffith.edu.au is freely available for the downloading of annotation data and the blind testing of new methods. We expect that this benchmark will be useful for stimulating the development of new powerful techniques for title and title/abstract-based search engines for relevant articles in biomedical research.Peer reviewe

Buckling effects on the fluid-structure interaction of a viscoelastic, composite panel in a subsonic flow

The use of composite materials in the aerospace field requires some modifications of design and analysis tools to predict particular phenomena that may be detrimental to the performance of a flight vehicle. The study of the interaction of a flexible structure with a surrounding fluid flow is known as aeroelasticity, and two phenomena of interest within aeroelasticity are panel flutter and instability. Panel flutter is the simple harmonic motion of the panel along the panel's perpendicular direction, while instability is the increasing displacement of the panel in the perpendicular direction. Viscoelasticity provides an improved model for composite materials; therefore it is desirable to study a viscoelastic panel in a wind tunnel to determine its flutter performance. Prior to such an experimental study, the effects of buckling on the panel's fluid-structure interaction should be investigated. Buckling during a wind tunnel test for elastic panels has been reported. The simulations indicate that the boundary conditions have the most noticeable effect on the flutter speed for four carbon-epoxy plies laminated into a square panel. A clamped panel has the lowest flutter speed regardless of the ply lay-up and the compressive load applied. Panels with free edges exhibited the highest flutter speed, indeed the flutter speed was beyond the incompressible flow model used for the air. The compressive loads typically had a negative effect, save for one case involving a simply-supported panel where a compressive load less than the buckling load has a stabilizing effect. At buckling, the panels were found to be unstable at simulated speeds

Buckling effects on the fluid-structure interaction of a viscoelastic, composite panel in a subsonic flow

The use of composite materials in the aerospace field requires some modifications of design and analysis tools to predict particular phenomena that may be detrimental to the performance of a flight vehicle. The study of the interaction of a flexible structure with a surrounding fluid flow is known as aeroelasticity, and two phenomena of interest within aeroelasticity are panel flutter and instability. Panel flutter is the simple harmonic motion of the panel along the panel's perpendicular direction, while instability is the increasing displacement of the panel in the perpendicular direction. Viscoelasticity provides an improved model for composite materials; therefore it is desirable to study a viscoelastic panel in a wind tunnel to determine its flutter performance. Prior to such an experimental study, the effects of buckling on the panel's fluid-structure interaction should be investigated. Buckling during a wind tunnel test for elastic panels has been reported. The simulations indicate that the boundary conditions have the most noticeable effect on the flutter speed for four carbon-epoxy plies laminated into a square panel. A clamped panel has the lowest flutter speed regardless of the ply lay-up and the compressive load applied. Panels with free edges exhibited the highest flutter speed, indeed the flutter speed was beyond the incompressible flow model used for the air. The compressive loads typically had a negative effect, save for one case involving a simply-supported panel where a compressive load less than the buckling load has a stabilizing effect. At buckling, the panels were found to be unstable at simulated speeds