Qualidade potencial dos cafés produzidos na "Região das Matas de Minas".

Em regiões de montanha, como característico na “Região das Matas de Minas”, a cafeicultura é uma atividade que depende de mão de obra, que além de cara está cada vez mais escassa, aumentando os custos de produção da atividade e com isso diminuindo a competitividade dos cafés no mercado mundial. Para que estes cafés produzidos na região se tornem mais competitivos, se faz necessário, o aumento da qualidade final dos mesmos. O café é um produto com aromas e sabores distintos que produz uma das bebidas mais difundidas no mundo, e tem o seu valor de mercado ajustado de acordo com a qualidade final da bebida, a qual pode ser influenciada por muitos fatores, tais como fatores ambientais e variedade da planta. Objetivou-se com este trabalho avaliar os efeitos da encosta da montanha, altitude e variedade de planta sobre os valores médios dos atributos de qualidade potencial dos cafés produzidos na “Região das Matas de Minas” (entre faixas de altitudes pertencentes aos intervalos: EA < 700, 700 < EA ? 825, 825 < EA <950 e EA ? 950 metros acima do nível do mar). Frutos de café (Coffea arabica L.) das variedades Catuaí Vermelho e Catuaí Amarelo foram colhidos manualmente em ponto de maturação cereja. A colheita foi realizada em fazendas localizadas em quatorze dos 63 municípios que compõem a “Região das Matas de Minas”, distribuídos numa pequena parte da região do Vale do Rio Doce e uma maior parte na região da Zona da Mata, num território de Mata Atlântica, a Leste do estado de Minas Gerais

Effect of wall resistance on the total thermal resistance of a stacked microchannel heat sink

This paper reports on the different modeling approach of the total thermal resistance in a microchannel heat sink (MCHS); with wall resistance and the frequently used fin model, in comparison with experimental results. For a single stack MCHS, the wall model caused more than 10% difference but it can be extended to a stacked MCHS while the fin model could not, due to the adiabatic top condition. The wall resistance model is idealized, assuming a 100% efficient convective heat transfer while in the fin model 70% was the maximum. Meanwhile, stacking showed that at a constant flow rate, the thermal resistance could be reduced by 3% for a double stack, while increasing beyond that will decrease the thermal performance of the MCHS. The study showed the limits of models used and possible stacking of a MCHS for improved heat removal capability

Total phenolic content, antioxidative and antidiabetic properties of coconut (Cocos Nucifera L.) testa and selected bean seed coats

Natural alternatives tor the treatment of diabetes mellitus have been the interest of many researchers. In this study, the brown testas of mature coconuts were compared to beans seed coats of four varieties in terms of antioxidative and anti-hyperglycaemic properties. The total phenolic and flavonoid contents, the antioxidant potentials and the a-amvlase and a-glucosidase inhibitorv activities of the crude extracts were studied in vitro. The results showed that extracts of coconut testa and red kidney bean seed coat displayed higher a-glucosidase inhibition (IC50=19.90±5.67 and 4.84±1.43 μg/mL) and α-amylase inhibition (IC50=120.5±15.4 and 532.8±68.0 μg/mL) than the other extracts. These two extracts showed higher antioxidant capacities owing to their high phenolic and flavonoid contents. These results suggest that red kidney bean seed coat and tender coconut testa would have higher potential as nutraceuticals and could serve as natural alternative sources of anti-diabetic remedy

Study of CP violation in Dalitz-plot analyses of B0 --> K+K-KS, B+ --> K+K-K+, and B+ --> KSKSK+

We perform amplitude analyses of the decays $B^0 \to K^+K^-K^0_S$, $B^+ \rightarrow K^+K^-K^+$, and $B^+ \to K^0_S K^0_S K^+$, and measure CP-violating parameters and partial branching fractions. The results are based on a data sample of approximately $470\times 10^6$ $B\bar{B}$ decays, collected with the BABAR detector at the PEP-II asymmetric-energy $B$ factory at the SLAC National Accelerator Laboratory. For $B^+ \to K^+K^-K^+$, we find a direct CP asymmetry in $B^+ \to \phi(1020)K^+$ of $A_{CP}= (12.8\pm 4.4 \pm 1.3)$, which differs from zero by $2.8 \sigma$. For $B^0 \to K^+K^-K^0_S$, we measure the CP-violating phase $\beta_{\rm eff} (\phi(1020)K^0_S) = (21\pm 6 \pm 2)^\circ$. For $B^+ \to K^0_S K^0_S K^+$, we measure an overall direct CP asymmetry of $A_{CP} = (4 ^{+4}_{-5} \pm 2)$. We also perform an angular-moment analysis of the three channels, and determine that the $f_X(1500)$ state can be described well by the sum of the resonances $f_0(1500)$, $f_2^{\prime}(1525)$, and $f_0(1710)$.Comment: 35 pages, 68 postscript figures. v3 - minor modifications to agree with published versio

Studying the Underlying Event in Drell-Yan and High Transverse Momentum Jet Production at the Tevatron

We study the underlying event in proton-antiproton collisions by examining the behavior of charged particles (transverse momentum pT > 0.5 GeV/c, pseudorapidity |\eta| < 1) produced in association with large transverse momentum jets (~2.2 fb-1) or with Drell-Yan lepton-pairs (~2.7 fb-1) in the Z-boson mass region (70 < M(pair) < 110 GeV/c2) as measured by CDF at 1.96 TeV center-of-mass energy. We use the direction of the lepton-pair (in Drell-Yan production) or the leading jet (in high-pT jet production) in each event to define three regions of \eta-\phi space; toward, away, and transverse, where \phi is the azimuthal scattering angle. For Drell-Yan production (excluding the leptons) both the toward and transverse regions are very sensitive to the underlying event. In high-pT jet production the transverse region is very sensitive to the underlying event and is separated into a MAX and MIN transverse region, which helps separate the hard component (initial and final-state radiation) from the beam-beam remnant and multiple parton interaction components of the scattering. The data are corrected to the particle level to remove detector effects and are then compared with several QCD Monte-Carlo models. The goal of this analysis is to provide data that can be used to test and improve the QCD Monte-Carlo models of the underlying event that are used to simulate hadron-hadron collisions.Comment: Submitted to Phys.Rev.

Hunt for new phenomena using large jet multiplicities and missing transverse momentum with ATLAS in 4.7 fb−1 of s√=7TeV proton-proton collisions

Results are presented of a search for new particles decaying to large numbers of jets in association with missing transverse momentum, using 4.7 fb−1 of pp collision data at s√=7TeV collected by the ATLAS experiment at the Large Hadron Collider in 2011. The event selection requires missing transverse momentum, no isolated electrons or muons, and from ≥6 to ≥9 jets. No evidence is found for physics beyond the Standard Model. The results are interpreted in the context of a MSUGRA/CMSSM supersymmetric model, where, for large universal scalar mass m 0, gluino masses smaller than 840 GeV are excluded at the 95% confidence level, extending previously published limits. Within a simplified model containing only a gluino octet and a neutralino, gluino masses smaller than 870 GeV are similarly excluded for neutralino masses below 100 GeV

Measurement of the W+W−W^+W^- Production Cross Section and Search for Anomalous WWγWW\gamma and WWZWWZ Couplings in ppˉp \bar p Collisions at s=1.96\sqrt{s} = 1.96 TeV

This Letter describes the current most precise measurement of the $W$ boson pair production cross section and most sensitive test of anomalous $WW\gamma$ and $WWZ$ couplings in $p \bar p$ collisions at a center-of-mass energy of 1.96 TeV. The $WW$ candidates are reconstructed from decays containing two charged leptons and two neutrinos, where the charged leptons are either electrons or muons. Using data collected by the CDF II detector from 3.6 fb$^{-1}$ of integrated luminosity, a total of 654 candidate events are observed with an expected background contribution of $320 \pm 47$ events. The measured total cross section is $\sigma (p \bar p \to W^+ W^- + X) = 12.1 \pm 0.9 \textrm{(stat)} ^{+1.6}_{-1.4} \textrm{(syst)}$ pb, which is in good agreement with the standard model prediction. The same data sample is used to place constraints on anomalous $WW\gamma$ and $WWZ$ couplings.Comment: submitted to Phys. Rev. Let

Measurements of fiducial and differential cross sections for Higgs boson production in the diphoton decay channel at s√=8 TeV with ATLAS

Measurements of fiducial and differential cross sections are presented for Higgs boson production in proton-proton collisions at a centre-of-mass energy of s√=8 TeV. The analysis is performed in the H → γγ decay channel using 20.3 fb−1 of data recorded by the ATLAS experiment at the CERN Large Hadron Collider. The signal is extracted using a fit to the diphoton invariant mass spectrum assuming that the width of the resonance is much smaller than the experimental resolution. The signal yields are corrected for the effects of detector inefficiency and resolution. The pp → H → γγ fiducial cross section is measured to be 43.2 ±9.4(stat.) − 2.9 + 3.2 (syst.) ±1.2(lumi)fb for a Higgs boson of mass 125.4GeV decaying to two isolated photons that have transverse momentum greater than 35% and 25% of the diphoton invariant mass and each with absolute pseudorapidity less than 2.37. Four additional fiducial cross sections and two cross-section limits are presented in phase space regions that test the theoretical modelling of different Higgs boson production mechanisms, or are sensitive to physics beyond the Standard Model. Differential cross sections are also presented, as a function of variables related to the diphoton kinematics and the jet activity produced in the Higgs boson events. The observed spectra are statistically limited but broadly in line with the theoretical expectations

Measurement of the production of a W boson in association with a charm quark in pp collisions at √s = 7 TeV with the ATLAS detector

The production of a W boson in association with a single charm quark is studied using 4.6 fb−1 of pp collision data at s√ = 7 TeV collected with the ATLAS detector at the Large Hadron Collider. In events in which a W boson decays to an electron or muon, the charm quark is tagged either by its semileptonic decay to a muon or by the presence of a charmed meson. The integrated and differential cross sections as a function of the pseudorapidity of the lepton from the W-boson decay are measured. Results are compared to the predictions of next-to-leading-order QCD calculations obtained from various parton distribution function parameterisations. The ratio of the strange-to-down sea-quark distributions is determined to be 0.96+0.26−0.30 at Q 2 = 1.9 GeV2, which supports the hypothesis of an SU(3)-symmetric composition of the light-quark sea. Additionally, the cross-section ratio σ(W + +c¯¯)/σ(W − + c) is compared to the predictions obtained using parton distribution function parameterisations with different assumptions about the s−s¯¯¯ quark asymmetry

Measurement of the cross-section and charge asymmetry of WW bosons produced in proton-proton collisions at s=8\sqrt{s}=8 TeV with the ATLAS detector

This paper presents measurements of the $W^+ \rightarrow \mu^+\nu$ and $W^- \rightarrow \mu^-\nu$ cross-sections and the associated charge asymmetry as a function of the absolute pseudorapidity of the decay muon. The data were collected in proton--proton collisions at a centre-of-mass energy of 8 TeV with the ATLAS experiment at the LHC and correspond to a total integrated luminosity of 20.2~\mbox{fb^{-1}}. The precision of the cross-section measurements varies between 0.8% to 1.5% as a function of the pseudorapidity, excluding the 1.9% uncertainty on the integrated luminosity. The charge asymmetry is measured with an uncertainty between 0.002 and 0.003. The results are compared with predictions based on next-to-next-to-leading-order calculations with various parton distribution functions and have the sensitivity to discriminate between them.Comment: 38 pages in total, author list starting page 22, 5 figures, 4 tables, submitted to EPJC. All figures including auxiliary figures are available at https://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/STDM-2017-13