Gravity-driven transport of three engineered nanomaterials in unsaturated soils and their effects on soil pH and nutrient release

The gravity-driven transport of TiO2, CeO2, and Cu(OH)2 engineered nanomaterials (ENMs) and their effects on soil pH and nutrient release were measured in three unsaturated soils. ENM transport was found to be highly limited in natural soils collected from farmland and grasslands, with the majority of particles being retained in the upper 0-3 cm of the soil profile, while greater transport depth was seen in a commercial potting soil. Physical straining appeared to be the primary mechanism of retention in natural soils as ENMs immediately formed micron-scale aggregates, which was exacerbated by coating particles with Suwannee River natural organic matter (NOM) which promote steric hindrance. Small changes in soil pH were observed in natural soils contaminated with ENMs that were largely independent of ENM type and concentration, but differed from controls. These changes may have been due to enhanced release of naturally present pH-altering ions (Mg(2+), H(+)) in the soil via substitution processes. These results suggest ENMs introduced into soil will likely be highly retained near the source zone

Continuum-based models and concepts for the transport of nanoparticles in saturated porous media: A state-of-the-science review

Environmental applications of nanoparticles (NP) increasingly result in widespread NP distribution within porous media where they are subject to various concurrent transport mechanisms including irreversible deposition, attachment/detachment (equilibrium or kinetic), agglomeration, physical straining, site-blocking, ripening, and size exclusion. Fundamental research in NP transport is typically conducted at small scale, and theoretical mechanistic modeling of particle transport in porous media faces challenges when considering the simultaneous effects of transport mechanisms. Continuum modeling approaches, in contrast, are scalable across various scales ranging from column experiments to aquifer. They have also been able to successfully describe the simultaneous occurrence of various transport mechanisms of NP in porous media such as blocking/straining or agglomeration/deposition/detachment. However, the diversity of model equations developed by different authors and the lack of effective approaches for their validation present obstacles to the successful robust application of these models for describing or predicting NP transport phenomena. This review aims to describe consistently all the important NP transport mechanisms along with their representative mathematical continuum models as found in the current scientific literature. Detailed characterizations of each transport phenomenon in regards to their manifestation in the column experiment outcomes, i.e., breakthrough curve (BTC) and residual concentration profile (RCP), are presented to facilitate future interpretations of BTCs and RCPs. The review highlights two NP transport mechanisms, agglomeration and size exclusion, which are potentially of great importance in controlling the fate and transport of NP in the subsurface media yet have been widely neglected in many existing modeling studies. A critical limitation of the continuum modeling approach is the number of parameters used upon application to larger scales and when a series of transport mechanisms are involved. We investigate the use of simplifying assumptions, such as the equilibrium assumption, in modeling the attachment/detachment mechanisms within a continuum modelling framework. While acknowledging criticisms about the use of this assumption for NP deposition on a mechanistic (process) basis, we found that its use as a description of dynamic deposition behavior in a continuum model yields broadly similar results to those arising from a kinetic model. Furthermore, we show that in two dimensional (2-D) continuum models the modeling efficiency based on the Akaike information criterion (AIC) is enhanced for equilibrium vs kinetic with no significant reduction in model performance. This is because fewer parameters are needed for the equilibrium model compared to the kinetic model. Two major transport regimes are identified in the transport of NP within porous media. The first regime is characterized by higher particle-surface attachment affinity than particle-particle attachment affinity, and operative transport mechanisms of physicochemical filtration, blocking, and physical retention. The second regime is characterized by the domination of particle-particle attachment tendency over particle-surface affinity. In this regime although physicochemical filtration as well as straining may still be operative, ripening is predominant together with agglomeration and further subsequent retention. In both regimes careful assessment of NP fate and transport is necessary since certain combinations of concurrent transport phenomena leading to large migration distances are possible in either case

Release and toxicity comparison between industrial- and sunscreen-derived nano-ZnO particles

Many consumer products containing ZnO have raised concern for safety in regard to environmental impact and the public health. Widely used sunscreens for protecting against UV and avoiding sunburns represent a great exposure to nano-ZnO, one of the ingredients commonly applied in sunscreens. Applying nanoproducts on beaches may release nanoparticles unintentionally into the ocean. Despite the accumulation of such nanoproducts in the ocean harming or being detrimental to critical marine organisms, few studies have investigated the release and potential toxicity of nanoparticles extracted from products and compared them with those from industrial-type nanoparticles. Results show that the cytotoxicity of both industrial- and sunscreen-derived nano-ZnO to the marine diatom algae, Thalassiosira pseudonana, increased as exposure increases over time, as measured by growth inhibition (%) of the algae at a constant concentration of nano-ZnO (10 mg/L). The extent of toxicity appeared to be higher from industrial-type nano-ZnO compared with sunscreen-extracted nano-ZnO, though the extent becomes similar when concentrations increase to 50 mg/L. On the other hand, at a fixed exposure time of 48 h, the cytotoxicity increases as concentrations increase with the higher toxicity shown from the industrial-type compared with sunscreen-induced nano-ZnO. Results indicate that while industrial-type nano-ZnO shows higher toxicity than sunscreen-derived nano-ZnO, the release and extent of toxicity from nano-ZnO extracted from sunscreen are not trivial and should be monitored for the development of safe manufacturing of nanomaterials-induced products

Environmental dynamics of metal oxide nanoparticles in heterogeneous systems: A review

•Influence of contaminants on the mobility of metal oxide nanoparticles (MNPs).•Synergistic effects of MNPs in the presence of contaminants.•Effect of environmental factors on the transformed MNPs.•Research direction on the toxicity modeling assessment of heterogeneous systems. Metal oxide nanoparticles (MNPs) have been used for many purposes including water treatment, health, cosmetics, electronics, food packaging, and even food products. As their applications continue to expand, concerns have been mounting about the environmental fate and potential health risks of the nanoparticles in the environment. Based on the latest information, this review provides an overview of the factors that affect the fate, transformation and toxicity of MNPs. Emphasis is placed on the effects of various aquatic contaminants under various environmental conditions on the transformation of metal oxides and their transport kinetics – both in homogeneous and heterogeneous systems – and the effects of contaminants on the toxicity of MNPs. The presence of existing contaminants decreases bioavailability through hetero-aggregation, sorption, and/or complexation upon an interaction with MNPs. Contaminants also influence the fate and transport of MNPs and exhibit their synergistic toxic effects that contribute to the extent of the toxicity. This review will help regulators, engineers, and scientists in this field to understand the latest development on MNPs, their interactions with aquatic contaminants as well as the environmental dynamics of their fate and transformation. The knowledge gap and future research needs are also identified, and the challenges in assessing the environmental fate and transport of nanoparticles in heterogeneous systems are discussed