Catalytic performance of commercial Cu-ZSM-5 zeolite modified by desilication in NH3-SCR and NH3-SCO processes

[EN] In the presented manuscript an influence of the mesoporosity generation in commercial ZSM-5 zeolite on its catalytic performance in two environmental processes, such as NO reduction with ammonia (NH3SCR, Selective Catalytic Reduction of NO with NH3) and NH3 oxidation (NH3-SCO, Selective Catalytic Oxidation of NH3) was examined. Micro-mesoporous catalysts with the properties of ZSM-5 zeolite were obtained by desilication with NaOH and NaOH/TPAOH (tetrapropylammonium hydroxide) mixture with different ratios (TPA+/OH- = 0.2, 0.4, 0.6, 0.8 and infinity) and for different durations (1, 2, 4 and 6 h). The results of the catalytic studies (over the Cu-exchanged samples) showed higher activity of this novel mesostructured group of zeolitic materials. Enhanced catalytic performance was related to the generated mesoporosity (improved Hierarchy Factor (HF) of the samples), that was observed especially with the use of Pore Directing Agent (PDA) additive, TPAOH. Applied desilication conditions did not influence significantly the crystallinity of the samples (X-ray diffraction analysis (XRD)), despite the treatment for 6 h in NaOH solution, which was found to be too severe to preserve the zeolitic properties of the samples. The modified porous structure and accessibility of acid sites (increased surface acidity determined by temperature programmed desorption of ammonia (NH3-TPD)) influenced the red-ox properties of copper species introduced by ion-exchange method (temperature programmed reduction with hydrogen (H-2-TPR). Increased acidity of the micro-mesoporous samples, as well as the content of easily reducible copper species resulted in a significant improvement of Cu-ZSM-5 catalytic efficiency in the NH3-SCR and NH3-SCO processes. (C) 2017 Elsevier Inc. All rights reserved.This work was supported by the National Science Center under grant no. 2011/03/N/ST5/04820. Part of the research was carried out with the equipment purchased thanks to the financial support of the European Regional Development Fund in the framework of the Polish Innovation Economy Operational Program (contract no. POIG.02.01.00-12-023/08). U. D. acknowledges to Spanish Government by the funding (MAT2014-52085-C2-1-P).Rutkowska, M.; Pacia, I.; Basag, S.; Kowalczyk, A.; Piwowarska, Z.; Duda, M.; Tarach, K.... (2017). Catalytic performance of commercial Cu-ZSM-5 zeolite modified by desilication in NH3-SCR and NH3-SCO processes. Microporous and Mesoporous Materials. 246:193-206. https://doi.org/10.1016/j.micromeso.2017.03.017S19320624

Models of support for disclosure of HIV status to HIV-infected children and adolescents in resource-limited settings

Introduction: Disclosure of HIV status to HIV-infected children and adolescents is a major care challenge. We describe current site characteristics related to disclosure of HIV status in resource-limited paediatric HIV care settings within the International Epidemiology Databases to Evaluate AIDS (IeDEA) consortium. Methods: An online site assessment survey was conducted across the paediatric HIV care sites within six global regions of IeDEA. A standardized questionnaire was administered to the sites through the REDCap platform. Results: From June 2014 to March 2015, all 180 sites of the IeDEA consortium in 31 countries completed the online survey: 57% were urban, 43% were health centres and 86% were integrated clinics (serving both adults and children). Almost all the sites (98%) reported offering disclosure counselling services. Disclosure counselling was most often provided by counsellors (87% of sites), but also by nurses (77%), physicians (74%), social workers (68%), or other clinicians (65%). It was offered to both caregivers and children in 92% of 177 sites with disclosure counselling. Disclosure resources and procedures varied across geographical regions. Most sites in each region reported performing staff members' training on disclosure (72% to 96% of sites per region), routinely collecting HIV disclosure status (50% to 91%) and involving caregivers in the disclosure process (71% to 100%). A disclosure protocol was available in 14% to 71% of sites. Among the 143 sites (79%) routinely collecting disclosure status process, the main collection method was by asking the caregiver or child (85%) about the child's knowledge of his/her HIV status. Frequency of disclosure status assessment was every three months in 63% of the sites, and 71% stored disclosure status data electronically. Conclusion: The majority of the sites reported offering disclosure counselling services, but educational and social support resources and capacities for data collection varied across regions. Paediatric HIV care sites worldwide still need specific staff members' training on disclosure, development and implementation of guidelines for HIV disclosure, and standardized data collection on this key issue to ensure the long-term health and wellbeing of HIV-infected youth

Search for direct production of charginos and neutralinos in events with three leptons and missing transverse momentum in √s = 7 TeV pp collisions with the ATLAS detector

A search for the direct production of charginos and neutralinos in final states with three electrons or muons and missing transverse momentum is presented. The analysis is based on 4.7 fb−1 of proton–proton collision data delivered by the Large Hadron Collider and recorded with the ATLAS detector. Observations are consistent with Standard Model expectations in three signal regions that are either depleted or enriched in Z-boson decays. Upper limits at 95% confidence level are set in R-parity conserving phenomenological minimal supersymmetric models and in simplified models, significantly extending previous results

Measurement of the View the tt production cross-section using eμ events with b-tagged jets in pp collisions at √s = 13 TeV with the ATLAS detector

This paper describes a measurement of the inclusive top quark pair production cross-section (σtt¯) with a data sample of 3.2 fb−1 of proton–proton collisions at a centre-of-mass energy of √s = 13 TeV, collected in 2015 by the ATLAS detector at the LHC. This measurement uses events with an opposite-charge electron–muon pair in the final state. Jets containing b-quarks are tagged using an algorithm based on track impact parameters and reconstructed secondary vertices. The numbers of events with exactly one and exactly two b-tagged jets are counted and used to determine simultaneously σtt¯ and the efficiency to reconstruct and b-tag a jet from a top quark decay, thereby minimising the associated systematic uncertainties. The cross-section is measured to be: σtt¯ = 818 ± 8 (stat) ± 27 (syst) ± 19 (lumi) ± 12 (beam) pb, where the four uncertainties arise from data statistics, experimental and theoretical systematic effects, the integrated luminosity and the LHC beam energy, giving a total relative uncertainty of 4.4%. The result is consistent with theoretical QCD calculations at next-to-next-to-leading order. A fiducial measurement corresponding to the experimental acceptance of the leptons is also presented

Search for strong gravity in multijet final states produced in pp collisions at √s=13 TeV using the ATLAS detector at the LHC

A search is conducted for new physics in multijet final states using 3.6 inverse femtobarns of data from proton-proton collisions at √s = 13TeV taken at the CERN Large Hadron Collider with the ATLAS detector. Events are selected containing at least three jets with scalar sum of jet transverse momenta (HT) greater than 1TeV. No excess is seen at large HT and limits are presented on new physics: models which produce final states containing at least three jets and having cross sections larger than 1.6 fb with HT > 5.8 TeV are excluded. Limits are also given in terms of new physics models of strong gravity that hypothesize additional space-time dimensions

Search for TeV-scale gravity signatures in high-mass final states with leptons and jets with the ATLAS detector at sqrt [ s ] = 13TeV

A search for physics beyond the Standard Model, in final states with at least one high transverse momentum charged lepton (electron or muon) and two additional high transverse momentum leptons or jets, is performed using 3.2 fb−1 of proton–proton collision data recorded by the ATLAS detector at the Large Hadron Collider in 2015 at √s = 13 TeV. The upper end of the distribution of the scalar sum of the transverse momenta of leptons and jets is sensitive to the production of high-mass objects. No excess of events beyond Standard Model predictions is observed. Exclusion limits are set for models of microscopic black holes with two to six extra dimensions

Measurement of the correlation between flow harmonics of different order in lead-lead collisions at √sNN = 2.76 TeV with the ATLAS detector

Correlations between the elliptic or triangular flow coefficients vm (m=2 or 3) and other flow harmonics vn (n=2 to 5) are measured using √sNN=2.76 TeV Pb+Pb collision data collected in 2010 by the ATLAS experiment at the LHC, corresponding to an integrated luminosity of 7 μb−1. The vm−vn correlations are measured in midrapidity as a function of centrality, and, for events within the same centrality interval, as a function of event ellipticity or triangularity defined in a forward rapidity region. For events within the same centrality interval, v3 is found to be anticorrelated with v2 and this anticorrelation is consistent with similar anticorrelations between the corresponding eccentricities, ε2 and ε3. However, it is observed that v4 increases strongly with v2, and v5 increases strongly with both v2 and v3. The trend and strength of the vm−vn correlations for n=4 and 5 are found to disagree with εm−εn correlations predicted by initial-geometry models. Instead, these correlations are found to be consistent with the combined effects of a linear contribution to vn and a nonlinear term that is a function of v22 or of v2v3, as predicted by hydrodynamic models. A simple two-component fit is used to separate these two contributions. The extracted linear and nonlinear contributions to v4 and v5 are found to be consistent with previously measured event-plane correlations

The performance of the jet trigger for the ATLAS detector during 2011 data taking

The performance of the jet trigger for the ATLAS detector at the LHC during the 2011 data taking period is described. During 2011 the LHC provided proton–proton collisions with a centre-of-mass energy of 7 TeV and heavy ion collisions with a 2.76 TeV per nucleon–nucleon collision energy. The ATLAS trigger is a three level system designed to reduce the rate of events from the 40 MHz nominal maximum bunch crossing rate to the approximate 400 Hz which can be written to offline storage. The ATLAS jet trigger is the primary means for the online selection of events containing jets. Events are accepted by the trigger if they contain one or more jets above some transverse energy threshold. During 2011 data taking the jet trigger was fully efficient for jets with transverse energy above 25 GeV for triggers seeded randomly at Level 1. For triggers which require a jet to be identified at each of the three trigger levels, full efficiency is reached for offline jets with transverse energy above 60 GeV. Jets reconstructed in the final trigger level and corresponding to offline jets with transverse energy greater than 60 GeV, are reconstructed with a resolution in transverse energy with respect to offline jets, of better than 4 % in the central region and better than 2.5 % in the forward direction

Search for dark matter produced in association with a hadronically decaying vector boson in pp collisions at sqrt (s) = 13 TeV with the ATLAS detector

A search is presented for dark matter produced in association with a hadronically decaying W or Z boson using 3.2 fb−1 of pp collisions at View the MathML sources=13 TeV recorded by the ATLAS detector at the Large Hadron Collider. Events with a hadronic jet compatible with a W or Z boson and with large missing transverse momentum are analysed. The data are consistent with the Standard Model predictions and are interpreted in terms of both an effective field theory and a simplified model containing dark matter

Measurement of the cross section for isolated-photon plus jet production in pp collisions at √s=13 TeV using the ATLAS detector

The dynamics of isolated-photon production in association with a jet in proton–proton collisions at a centre-of-mass energy of 13 TeV are studied with the ATLAS detector at the LHC using a dataset with an integrated luminosity of 3.2 fb−1. Photons are required to have transverse energies above 125 GeV. Jets are identified using the anti- algorithm with radius parameter and required to have transverse momenta above 100 GeV. Measurements of isolated-photon plus jet cross sections are presented as functions of the leading-photon transverse energy, the leading-jet transverse momentum, the azimuthal angular separation between the photon and the jet, the photon–jet invariant mass and the scattering angle in the photon–jet centre-of-mass system. Tree-level plus parton-shower predictions from Sherpa and Pythia as well as next-to-leading-order QCD predictions from Jetphox and Sherpa are compared to the measurements