Search for dark matter produced in association with bottom or top quarks in √s = 13 TeV pp collisions with the ATLAS detector

A search for weakly interacting massive particle dark matter produced in association with bottom or top quarks is presented. Final states containing third-generation quarks and miss- ing transverse momentum are considered. The analysis uses 36.1 fb−1 of proton–proton collision data recorded by the ATLAS experiment at √s = 13 TeV in 2015 and 2016. No significant excess of events above the estimated backgrounds is observed. The results are in- terpreted in the framework of simplified models of spin-0 dark-matter mediators. For colour- neutral spin-0 mediators produced in association with top quarks and decaying into a pair of dark-matter particles, mediator masses below 50 GeV are excluded assuming a dark-matter candidate mass of 1 GeV and unitary couplings. For scalar and pseudoscalar mediators produced in association with bottom quarks, the search sets limits on the production cross- section of 300 times the predicted rate for mediators with masses between 10 and 50 GeV and assuming a dark-matter mass of 1 GeV and unitary coupling. Constraints on colour- charged scalar simplified models are also presented. Assuming a dark-matter particle mass of 35 GeV, mediator particles with mass below 1.1 TeV are excluded for couplings yielding a dark-matter relic density consistent with measurements

Combinations of single-top-quark production cross-section measurements and vertical bar f(LV)V(tb)vertical bar determinations at root s=7 and 8 TeV with the ATLAS and CMS experiments

This paper presents the combinations of single-top-quark production cross-section measurements by the ATLAS and CMS Collaborations, using data from LHC proton-proton collisions at = 7 and 8 TeV corresponding to integrated luminosities of 1.17 to 5.1 fb(-1) at = 7 TeV and 12.2 to 20.3 fb(-1) at = 8 TeV. These combinations are performed per centre-of-mass energy and for each production mode: t-channel, tW, and s-channel. The combined t-channel cross-sections are 67.5 +/- 5.7 pb and 87.7 +/- 5.8 pb at = 7 and 8 TeV respectively. The combined tW cross-sections are 16.3 +/- 4.1 pb and 23.1 +/- 3.6 pb at = 7 and 8 TeV respectively. For the s-channel cross-section, the combination yields 4.9 +/- 1.4 pb at = 8 TeV. The square of the magnitude of the CKM matrix element V-tb multiplied by a form factor f(LV) is determined for each production mode and centre-of-mass energy, using the ratio of the measured cross-section to its theoretical prediction. It is assumed that the top-quark-related CKM matrix elements obey the relation |V-td|, |V-ts| << |V-tb|. All the |f(LV)V(tb)|(2) determinations, extracted from individual ratios at = 7 and 8 TeV, are combined, resulting in |f(LV)V(tb)| = 1.02 +/- 0.04 (meas.) +/- 0.02 (theo.). All combined measurements are consistent with their corresponding Standard Model predictions.Peer reviewe

Search for new phenomena in high-mass diphoton final states using 37 fb−1 of proton–proton collisions collected at √s = 13 TeV with the ATLAS detector

Searches for new phenomena in high-mass diphoton final states with the ATLAS experiment at the LHC are presented. The analysis is based on pp collision data corresponding to an integrated luminosity of 36.7 fb−1 at a centre-of-mass energy √s = 13 TeV recorded in 2015 and 2016. Searches are performed for resonances with spin 0, as predicted by theories with an extended Higgs sector, and for resonances with spin 2, using a warped extra-dimension model as a benchmark model, as well as for non-resonant signals, assuming a large extra-dimension scenario. No significant deviation from the Standard Model is observed. Upper limits are placed on the production cross section times branching ratio to two photons as a function of the resonance mass. In addition, lower limits are set on the ultraviolet cutoff scale in the large extra-dimensions model

Décollement des fondations sous séisme : méthodes temporelles et temps/fréquence

International audienceUne comparaison entre des méthodes temporelles et des méthodes temps/fréquence est proposée pour l'étude du décollement des fondations en cas de séisme. L'approche temps/ fréquence est fondée sur l'utilisation d'un modèle détaillé du sol sous la fondation faisant appel à une méthode d'éléments finis en fréquence. Le décollement est traité de manière itérative sur l'ensemble de la plage de temps en utilisant un opérateur auxiliaire construit à partir de statistiques sur la réponse, supposée aléatoire. Les méthodes temporelles sont fondées sur des techniques de pénalisation des conditions de contact dans le Code_Aster, le sol ayant été remplacé par un tapis de ressorts équivalents calibré à partir du modèle par éléments de frontière. Ces deux approches sont comparées sur un cas industriel

L'impact de la démarche socio-économique

International audienc

Interaction sol-structure non-linéaire : étude industrielle avec la méthode Laplace-temps

International audienceDans le cadre d'études sismiques numériques de type « best-estimate », la prise en compte détaillée de l'interaction sol-structure, mais aussi des non-linéarités devient fondamentale. Les approches classiques validées n'étant, soit, que linéaires, soit trop simplificatrices au niveau de la prise en compte du sol, soit trop coûteuses en temps CPU, une nouvelle approche a dû être développée. C'est une méthode hybride BEM-FEM de type Laplace-temps, dont on présente ici une première validation sur une application de type industrielle

A Methodology for Ductile Fracture AnalysisBased on Damage Mechanics: Anlllustration of a Local Approach of Fracture

International audienceMajor solutions needed in frlcture analysis are (d) simple and accurate matedal characterization and (ô) easy transferring of malerial data lo cracked structures. ln !h€ proposed methodology. constitutive relationships. including cavity growth and coalescence, are used. Material characterization is based on the simple notched tension lest. Several structural steels have been characterized. especially 4508 steel. and the direct transferring of material data hâs been demonstrated wilh tests on circumf€rentially cracked tension specimens. In addition. the extrapolation of material data io different inclusion conl€nls and temperatures was attempted, with favorabl€ rcsults for the first factor through a specific parameter of the model. Th€ temperature dcpendence of 4508 steel ductiliiy is related to an inverle strain rale effect on the flow curv€: the modeling of this effect gives encoùraging results, but it must be refined to producc an effeclive prediction. KEY WORDSI ductile fracture. damâge mechanics. local approach to fracture, crack iniriation, slable crack growth, 4508 steel. inclusion contenls, notched tension test. fracture mechanics. nonlinear fracture mcchanics Some of the major problems engineers have to cope with in fracture analysis are the following: (a) material characterization, that is. the generation of adequate data from specimen testing, and (ô) the transferring of fracture mechanics data (o the struclural analysis of components. As a mattcr of fact, the generation of matedal data can be money and time consuming: for example, the determination ofJ-Ad resistance curves is still a toilsome task, though some progress was gained with partial unloading cornpliance methods. Frequently, existing material data do not correspond to the specific application (in reference to temperature, strain rate, irradiation. aging, and so forth), and hazardous extrapolations are necessary

Searches for the ZγZ\gamma decay mode of the Higgs boson and for new high-mass resonances in pppp collisions at s=13\sqrt{s} = 13 TeV with the ATLAS detector

International audienceThis article presents searches for the Zγ decay of the Higgs boson and for narrow high-mass resonances decaying to Zγ, exploiting Z boson decays to pairs of electrons or muons. The data analysis uses 36.1 fb$^{−1}$ of pp collisions at $\sqrt{s}=13$ recorded by the ATLAS detector at the CERN Large Hadron Collider. The data are found to be consistent with the expected Standard Model background. The observed (expected — assuming Standard Model pp → H → Zγ production and decay) upper limit on the production cross section times the branching ratio for pp → H → Zγ is 6.6. (5.2) times the Standard Model prediction at the 95% confidence level for a Higgs boson mass of 125.09 GeV. In addition, upper limits are set on the production cross section times the branching ratio as a function of the mass of a narrow resonance between 250 GeV and 2.4 TeV, assuming spin-0 resonances produced via gluon-gluon fusion, and spin-2 resonances produced via gluon-gluon or quark-antiquark initial states. For high-mass spin-0 resonances, the observed (expected) limits vary between 88 fb (61 fb) and 2.8 fb (2.7 fb) for the mass range from 250 GeV to 2.4 TeV at the 95% confidence level