Entropy of metallic glasses and the size effect on glass transition

International audienceA statistical description of metallic glasses is proposed based on evaluation of an entropy and using the concept of potential energy landscape (PEL). The PEL is probed using nano-indentation, assuming that serrations observed are related to local energy levels. Serrations sizes follow a Poisson distribution consistent with, that their formation is a rare events. An entropy is derived revealing parameters characterizing the glass structure. The relevance of the approach is tested on the size effect on mechanical properties of metallic glass. It is noticed that the relations explain the effect of film thickness on the glass transition temperature observed for glass polymers.Une description statistique des verres métalliques est proposée, basée sur l'évaluation d'une entropie et utilisant le concept de paysage du potentiel énergétique (PEL). Le PEL est sondé en utilisant la nanoindentation, en supposant que les serrations observées sont liées aux niveaux d'énergie locaux. La taille des serrations suit une distribution de Poisson cohérente avec la dynamique des événements rares. Une entropie est dérivée révélant des paramètres caractérisant la structure du verre. La pertinence de l'approche est testée sur l'effet de taille sur les propriétés mécaniques du verre métallique. On constate que les relations expliquent l'effet de l'épaisseur du film sur la température de transition vitreuse observée pour les polymères vitreux

Bulk metallic glass composites: microstructural influences on mechanical properties

Bulk metallic glasses (BMGs) have been strongly investigated as they show on the one hand interesting mechanical properties as high strength and good wear resistance but on the other hand limited ductile deformability. Bulk metallic glass composites (BMGCs) are very promising to overcome and improve the properties by clever combination of different phases. However, a major drawback is the limited choices of phase combinations in common fabrication routes and lack of major microstructure adjustability. A promising technique to overcome these drawbacks is severe plastic deformation process, e.g. high pressure torsion (HPT), where the production can be started with metallic glass powders. For this route, the powder is consolidated and deformed by applying a high shear deformation to bulk samples. Therefore, it is possible to produce fully amorphous specimens [1], but also composites containing two different amorphous phases or an amorphous and a crystalline one [2]. Please click Additional Files below to see the full abstract

Deformation behavior of bulk metallic glasses produced via Severe Plastic Deformation and the influence of a second phase

Over the last years bulk metallic glasses (BMG) have been strongly investigated as their mechanical properties are very promising especially in terms of their high yield strength and high elastic strain. However, a major drawback is their complicated production depending strongly on dimensions and chemistry. A promising technique to overcome these drawbacks is using a severe plastic deformation process, e.g. high pressure torsion (HPT), where the production can be started with metallic glass powders, which are generally much easier to fabricate. For this route, the powder is consolidated and then the powder particles are welded together by applying a high shear deformation. The produced specimen remain fully amorphous and no porosity is detectable after sufficient deformation [1]. To improve the mechanical properties of the BMG, the used Zr-based metallic glass powder is mixed with a crystalline Cu-powder or a Ni-based metallic glass powder to achieve a metal/metallic glass composite or a metallic glass/ metallic glass composite, respectively. Due to the small amounts of produced material, conventional macroscopic characterization methods, like compression or tension tests can hardly be used to analyze the overall mechanical properties. Therefore, in this work different micromechanical testing methods, such as nanoindentation, in-situ SEM micropillar compression, and finally in situ TEM picoindentation were carried out to investigate the deformation behavior under ambient but also non-ambient conditions. Using nanoindentation, the hardness and the Young’s Modulus was determined for two HPT-deformed BMGs with different composition. Additionally, high temperature nanoindentation experiments up to 350 °C were conducted to determine not only the temperature dependent hardness and the Young’s modulus but also to study the change in thermally activated processes during deformation via nanoindentation strain rate jump tests. It was found, that nanoindentation hardness is in good accordance to the macroscopic Vickers results. Increasing the temperature, hardness decreases slightly, while the modulus increases. The shear band formation is also dependent on the deformation temperature, since the extent of stair case formation in the load-displacement curves changes. Overcoming 300°C, the material becomes extremely ductile showing a strong strain rate sensitivity. Further, the uniaxial mechanical response of Zr-based BMG was examined in-situ in SEM using FIB prepared micropillars. The microcompression experiments revealed a strength of more than 2 GPa. Steps in the stress-strain curve suggest shear band formation, which could also be confirmed by the in-situ recorded SEM images Finally the influence of the second materials phase was investigated via TEM in-situ picoindentation, where a wedge shaped indenter was pressed in a TEM lamella. The load-displacement curve show a similar stair case behavior as seen during nanoindention and microcompression, indicating shear band formation. The shear band formation could be also observed in the TEM micrographs

Understanding the Interdependence of Penetration Depth and Deformation on Nanoindentation of Nanoporous Silver

International audienceA silver-based nanoporous material was produced by dealloying (selective chemical etching) of an Ag 38.75 Cu 38.75 Si 22.5 crystalline alloy. Composed of connected ligaments, this material was imaged using a scanning electron microscope (SEM) and focused ion-beam (FIB) scanning electron microscope tomography. Its mechanical behavior was evaluated using nanoindentation and found to be heterogeneous, with density variation over a length scale of a few tens of nanometers, similar to the indent size. This technique proved relevant to the investigation of a material's mechanical strength, as well as to how its behavior related to the material's microstructure. The hardness is recorded as a function of the indent depth and a phenomenological description based on strain gradient and densification kinetic was proposed to describe the resultant depth dependence

Nanoporous silver for electrocatalysis application in alkaline fuel cells

Self-supporting porous silver foils with an average pore size < 100 nm were produced from a crystalline silver-based ternary alloy as a precursor by removing second phases present in the silver matrix. The final Ag-based porous foil shows good mechanical properties when comparing to its previous amorphous analogues. Its activity for direct electrochemical oxidation of ammonia-borane (AB), a fuel of interest for direct liquid fuel cells, has been investigated in alkaline media. The material exhibits promising electrochemical properties in long-term operation; indeed, material composition and nanostructure remain similar after 15,000 cyclic-voltammetries between − 0.3 and 0.5 V vs. RHE in a 0.1 M NaOH + 5 mM AB solution thermostated at 25 °C. Nanoporous materials, and in particular nanoporous silver, can therefore represent a relevant choice as anode in direct ammonia-borane fuel cell

Large expert-curated database for benchmarking document similarity detection in biomedical literature search

Document recommendation systems for locating relevant literature have mostly relied on methods developed a decade ago. This is largely due to the lack of a large offline gold-standard benchmark of relevant documents that cover a variety of research fields such that newly developed literature search techniques can be compared, improved and translated into practice. To overcome this bottleneck, we have established the RElevant LIterature SearcH consortium consisting of more than 1500 scientists from 84 countries, who have collectively annotated the relevance of over 180 000 PubMed-listed articles with regard to their respective seed (input) article/s. The majority of annotations were contributed by highly experienced, original authors of the seed articles. The collected data cover 76% of all unique PubMed Medical Subject Headings descriptors. No systematic biases were observed across different experience levels, research fields or time spent on annotations. More importantly, annotations of the same document pairs contributed by different scientists were highly concordant. We further show that the three representative baseline methods used to generate recommended articles for evaluation (Okapi Best Matching 25, Term Frequency-Inverse Document Frequency and PubMed Related Articles) had similar overall performances. Additionally, we found that these methods each tend to produce distinct collections of recommended articles, suggesting that a hybrid method may be required to completely capture all relevant articles. The established database server located at https://relishdb.ict.griffith.edu.au is freely available for the downloading of annotation data and the blind testing of new methods. We expect that this benchmark will be useful for stimulating the development of new powerful techniques for title and title/abstract-based search engines for relevant articles in biomedical research.Peer reviewe

Search for gravitational-lensing signatures in the full third observing run of the LIGO-Virgo network

Gravitational lensing by massive objects along the line of sight to the source causes distortions of gravitational wave-signals; such distortions may reveal information about fundamental physics, cosmology and astrophysics. In this work, we have extended the search for lensing signatures to all binary black hole events from the third observing run of the LIGO--Virgo network. We search for repeated signals from strong lensing by 1) performing targeted searches for subthreshold signals, 2) calculating the degree of overlap amongst the intrinsic parameters and sky location of pairs of signals, 3) comparing the similarities of the spectrograms amongst pairs of signals, and 4) performing dual-signal Bayesian analysis that takes into account selection effects and astrophysical knowledge. We also search for distortions to the gravitational waveform caused by 1) frequency-independent phase shifts in strongly lensed images, and 2) frequency-dependent modulation of the amplitude and phase due to point masses. None of these searches yields significant evidence for lensing. Finally, we use the non-detection of gravitational-wave lensing to constrain the lensing rate based on the latest merger-rate estimates and the fraction of dark matter composed of compact objects

Nano-mousses métalliques -Propriétés et perspectives

Cet article est issu de : Matériaux | Étude et propriétés des métaux par Yannick CHAMPION Résumé Les nano-mousses métalliques sont des structures bi-continues constituées de ligaments métalliques de dimensions nanométriques et de l'ordre de 50% de porosité. De cette architecture découlent des propriétés plasmoniques, mécaniques et chimiques spécifiques. Elles peuvent être exploitées pour des applications : actionneur mécanique ; capteur ; formation d'interconnexions pour la microélectronique ; catalyse et électrocatalyse ; composants de batterie et de supercondensateur. Ces perspectives concernent les domaines de la santé, de l'énergie et de l'environnement