De los sistemas de prefabricación cerrada a la industrialización sutil de la edificación: algunas claves del cambio tecnológico

El trabajo que sigue pretende aportar hechos y posibles supuestos razonados sobre la evolución del sector de la edifi cación europea, con especial énfasis en el caso español, de la trayectoria de las tecnologías empleadas en el proceso de industrialización de la construcción en un período sufi cientemente amplio, –básicamente de 1970 a la fecha– lo que supone una panorámica de los hechos que han motivado o infl uido en el proceso de evolución de la construcción de viviendas a base de sistemas de prefabricación cerrada mayoritariamente mediante grandes paneles de hormigón a las nuevas formas de proyectar y construir que conlleva la utilización de componentes y subsistemas constructivos de diferentes procedencias. El trabajo se estructura básicamente en forma de cinco temas que, en parte, recogen y actualizan aportaciones ya publicadas por el autor sobre los siguientes aspectos: la evolución cronológica de las tecnologías constructivas utilizadas mayoritariamente en las tres últimas décadas; los cambios en las técnicas de producción de elementos prefabricados; las juntas como invariantes de la construcción industrializada; el nuevo enfoque de la coordinación modular y la repercusión económica de los elementos funcionales en los presupuestos de construcción de viviendas. - The present article discusses facts as well as possible assumptions relating to the evolution of building in Europe in general and Spain in particular, and the development of the technologies used in the industrialization of construction over a long period: essentially from 1970 to date. It is, then, an overview of the events that have occasioned or affected housing construction, ranging from closed system precasting, consisting primarily in large concrete panels, to the new design and building methods that entail the use of construction components and subsystems of different origins. The paper is organized around fi ve subjects that at least partially refl ect and update contributions previously published by the author on the following: chronological evolution of the most common construction technologies used in the last three decades; changes in precast and prefabricated member production; joints as invariants in industrialized construction; the new approach to modular coordination; and the economic impact of functional elements on housing construction budgets

A 19-SNP coronary heart disease gene score profile in subjects with type 2 diabetes: the coronary heart disease risk in type 2 diabetes (CoRDia study) study baseline characteristics

Background The coronary risk in diabetes (CoRDia) trial (n = 211) compares the effectiveness of usual diabetes care with a self-management intervention (SMI), with and without personalised risk information (including genetics), on clinical and behavioural outcomes. Here we present an assessment of randomisation, the cardiac risk genotyping assay, and the genetic characteristics of the recruits. Methods Ten-year coronary heart disease (CHD) risk was calculated using the UKPDS score. Genetic CHD risk was determined by genotyping 19 single nucleotide polymorphisms (SNPs) using Randox’s Cardiac Risk Prediction Array and calculating a gene score (GS). Accuracy of the array was assessed by genotyping a subset of pre-genotyped samples (n = 185). Results Overall, 10-year CHD risk ranged from 2–72 % but did not differ between the randomisation groups (p = 0.13). The array results were 99.8 % concordant with the pre-determined genotypes. The GS did not differ between the Caucasian participants in the CoRDia SMI plus risk group (n = 66) (p = 0.80) and a sample of UK healthy men (n = 1360). The GS was also associated with LDL-cholesterol (p = 0.05) and family history (p = 0.03) in a sample of UK healthy men (n = 1360). Conclusions CHD risk is high in this group of T2D subjects. The risk array is an accurate genotyping assay, and is suitable for estimating an individual’s genetic CHD risk. Trial registration This study has been registered at ClinicalTrials.gov; registration identifier NCT0189178

Search for direct pair production of the top squark in all-hadronic final states in proton-proton collisions at s√=8 TeV with the ATLAS detector

The results of a search for direct pair production of the scalar partner to the top quark using an integrated luminosity of 20.1fb−1 of proton–proton collision data at √s = 8 TeV recorded with the ATLAS detector at the LHC are reported. The top squark is assumed to decay via t˜→tχ˜01 or t˜→ bχ˜±1 →bW(∗)χ˜01 , where χ˜01 (χ˜±1 ) denotes the lightest neutralino (chargino) in supersymmetric models. The search targets a fully-hadronic final state in events with four or more jets and large missing transverse momentum. No significant excess over the Standard Model background prediction is observed, and exclusion limits are reported in terms of the top squark and neutralino masses and as a function of the branching fraction of t˜ → tχ˜01 . For a branching fraction of 100%, top squark masses in the range 270–645 GeV are excluded for χ˜01 masses below 30 GeV. For a branching fraction of 50% to either t˜ → tχ˜01 or t˜ → bχ˜±1 , and assuming the χ˜±1 mass to be twice the χ˜01 mass, top squark masses in the range 250–550 GeV are excluded for χ˜01 masses below 60 GeV

Observation of associated near-side and away-side long-range correlations in √sNN=5.02 TeV proton-lead collisions with the ATLAS detector

Two-particle correlations in relative azimuthal angle (Δϕ) and pseudorapidity (Δη) are measured in √sNN=5.02  TeV p+Pb collisions using the ATLAS detector at the LHC. The measurements are performed using approximately 1  μb-1 of data as a function of transverse momentum (pT) and the transverse energy (ΣETPb) summed over 3.1<η<4.9 in the direction of the Pb beam. The correlation function, constructed from charged particles, exhibits a long-range (2<|Δη|<5) “near-side” (Δϕ∼0) correlation that grows rapidly with increasing ΣETPb. A long-range “away-side” (Δϕ∼π) correlation, obtained by subtracting the expected contributions from recoiling dijets and other sources estimated using events with small ΣETPb, is found to match the near-side correlation in magnitude, shape (in Δη and Δϕ) and ΣETPb dependence. The resultant Δϕ correlation is approximately symmetric about π/2, and is consistent with a dominant cos⁡2Δϕ modulation for all ΣETPb ranges and particle pT

Search for new phenomena in final states with an energetic jet and large missing transverse momentum in pp collisions at √ s = 8 TeV with the ATLAS detector

Results of a search for new phenomena in final states with an energetic jet and large missing transverse momentum are reported. The search uses 20.3 fb−1 of √ s = 8 TeV data collected in 2012 with the ATLAS detector at the LHC. Events are required to have at least one jet with pT > 120 GeV and no leptons. Nine signal regions are considered with increasing missing transverse momentum requirements between Emiss T > 150 GeV and Emiss T > 700 GeV. Good agreement is observed between the number of events in data and Standard Model expectations. The results are translated into exclusion limits on models with either large extra spatial dimensions, pair production of weakly interacting dark matter candidates, or production of very light gravitinos in a gauge-mediated supersymmetric model. In addition, limits on the production of an invisibly decaying Higgs-like boson leading to similar topologies in the final state are presente

Search for R-parity-violating supersymmetry in events with four or more leptons in sqrt(s) =7 TeV pp collisions with the ATLAS detector

A search for new phenomena in final states with four or more leptons (electrons or muons) is presented. The analysis is based on 4.7 fb−1 of $\sqrt{s}=7\;\mathrm{TeV}$ proton-proton collisions delivered by the Large Hadron Collider and recorded with the ATLAS detector. Observations are consistent with Standard Model expectations in two signal regions: one that requires moderate values of missing transverse momentum and another that requires large effective mass. The results are interpreted in a simplified model of R-parity-violating supersymmetry in which a 95% CL exclusion region is set for charged wino masses up to 540 GeV. In an R-parity-violating MSUGRA/CMSSM model, values of m 1/2 up to 820 GeV are excluded for 10 < tan β < 40

Measurement of the cross-section of high transverse momentum vector bosons reconstructed as single jets and studies of jet substructure in pp collisions at √s = 7 TeV with the ATLAS detector

This paper presents a measurement of the cross-section for high transverse momentum W and Z bosons produced in pp collisions and decaying to all-hadronic final states. The data used in the analysis were recorded by the ATLAS detector at the CERN Large Hadron Collider at a centre-of-mass energy of √s = 7 TeV;{\rm Te}{\rm V}$and correspond to an integrated luminosity of$4.6\;{\rm f}{{{\rm b}}^{-1}}$. The measurement is performed by reconstructing the boosted W or Z bosons in single jets. The reconstructed jet mass is used to identify the W and Z bosons, and a jet substructure method based on energy cluster information in the jet centre-of-mass frame is used to suppress the large multi-jet background. The cross-section for events with a hadronically decaying W or Z boson, with transverse momentum${{p}_{{\rm T}}}\gt 320\;{\rm Ge}{\rm V}$and pseudorapidity$|\eta |\lt 1.9$, is measured to be${{\sigma }_{W+Z}}=8.5\pm 1.7$ pb and is compared to next-to-leading-order calculations. The selected events are further used to study jet grooming techniques

Socially learned attitude change is not reduced in medicated patients with schizophrenia

Schizophrenia is often associated with distinctive or odd social behaviours. Previous work suggests this could be due to a general reduction in conformity; however, this work only assessed the tendency to publicly agree with others, which may involve a number of different mechanisms. In this study, we specifically investigated whether patients display a reduced tendency to adopt other people’s opinions (socially learned attitude change). We administered a computerized conformity task, assumed to rely on reinforcement learning circuits, to 32 patients with schizophrenia or schizo-affective disorder and 39 matched controls. Each participant rated 153 faces for trustworthiness. After each rating, they were immediately shown the opinion of a group. After approximately 1 hour, participants were unexpectedly asked to rate all the faces again. We compared the degree of attitude change towards group opinion in patients and controls. Patients presented equal or more social influence on attitudes than controls. This effect may have been medication induced, as increased conformity was seen with higher antipsychotic dose. The results suggest that there is not a general decline in conformity in medicated patients with schizophrenia and that previous findings of reduced conformity are likely related to mechanisms other than reinforcement based social influence on attitudes

Biology of human hair: Know your hair to control it

Hair can be engineered at different levels—its structure and surface—through modification of its constituent molecules, in particular proteins, but also the hair follicle (HF) can be genetically altered, in particular with the advent of siRNA-based applications. General aspects of hair biology are reviewed, as well as the most recent contributions to understanding hair pigmentation and the regulation of hair development. Focus will also be placed on the techniques developed specifically for delivering compounds of varying chemical nature to the HF, indicating methods for genetic/biochemical modulation of HF components for the treatment of hair diseases. Finally, hair fiber structure and chemical characteristics will be discussed as targets for keratin surface functionalization

Moving from development to implementation of digital innovations within the NHS: myHealthE, a remote monitoring system for tracking patient outcomes in child and adolescent mental health services

OBJECTIVE: This paper aims to report our experience of developing, implementing, and evaluating myHealthE (MHE), a digital innovation for Child and Adolescents Mental Health Services (CAMHS), which automates the remote collection and reporting of Patient-Reported Outcome Measures (PROMs) into National Health Services (NHS) electronic healthcare records. METHODS: We describe the logistical and governance issues encountered in developing the MHE interface with patient-identifiable information, and the steps taken to overcome these development barriers. We describe the application's architecture and hosting environment to enable its operability within the NHS, as well as the capabilities needed within the technical team to bridge the gap between academic development and NHS operational teams. RESULTS: We present evidence on the feasibility and acceptability of this system within clinical services and the process of iterative development, highlighting additional functions that were incorporated to increase system utility. CONCLUSION: This article provides a framework with which to plan, develop, and implement automated PROM collection from remote devices back to NHS infrastructure. The challenges and solutions described in this paper will be pertinent to other digital health innovation researchers aspiring to deploy interoperable systems within NHS clinical systems