Die Weltgebetstreffen von Assisi

Die vorliegende Arbeit behandelt die Weltgebetstreffen von Assisi aus theologischer Perspektive. Es werden in chronologischer Abfolge Meilensteine auf dem Weg der katholischen Kirche von einer exklusiv verstandenen Heilskonzeption zu einer immer größeren Öffnung auf andere Religionen hin skizziert. Das Dogma des Konzils von Florenz, das festhält, dass außerhalb der Kirche kein Heil ist, bildet den Ausgangspunkt. Über die Annahme eines „Votum ecclesiae“ zur Theorie des „Anonymen Christentums“ führt der Weg schließlich zu den Dokumenten des Zweiten Vatikanischen Konzils Nostra aetate, Lumen gentium und Gaudium et spes. Vor diesem Hintergrund kommt das von Johannes Paul II initiierte Weltgebetstreffen 1986 in den Blick, zusammen mit dem Themenfeld „Interreligiöser Dialog“. Es folgt eine Darstellung des Weltgebetstreffens von Benedikt XVI. 2011, unter besonderer Beachtung der Einbeziehung von AtheistInnen bei dem Ereignis. Dem Zusammenhang von franziskanischer Spiritualität und interreligiösem Dialog ist ein eigener kurzer Abschnitt gewidmet. Der dargestellte theologische Weg lässt die bisherigen drei Weltgebetstreffen nicht nur als Fortschreibung katholischer Tradition erscheinen, sondern auch als besonders zu wertschätzende Ereignisse. Dabei ist der historische Charakter der Treffen sekundär, primär sind sie Beispiele dafür, wie interreligiöse Begegnung stattfinden kann und bieten sich so als Vorbilder für weitere Initiativen an

CCQM-K55.b (Aldrin) : Final report: october 2012. CCQM-K55.b key comparison on the characterization of organic substances for chemical purity

Under the auspices of the Organic Analysis Working Group (OAWG) of the Comité Consultatif pour la Quantité de Matière (CCQM) a key comparison, CCQM K55.b, was coordinated by the Bureau International des Poids et Mesures (BIPM) in 2010/2011. Nineteen national measurement institutes and the BIPM participated. Participants were required to assign the mass fraction of aldrin present as the main component in the comparison sample for CCQM-K55.b which consisted of technical grade aldrin obtained from the National Measurement Institute Australia that had been subject to serial recrystallization and drying prior to sub-division into the units supplied for the comparison. Aldrin was selected to be representative of the performance of a laboratory's measurement capability for the purity assignment of organic compounds of medium structural complexity [molar mass range 300 Da to 500 Da] and low polarity (pKOW < −2) for which related structure impurities can be quantified by capillary gas phase chromatography (GC). The key comparison reference value (KCRV) for the aldrin content of the material was 950.8 mg/g with a combined standard uncertainty of 0.85 mg/g. The KCRV was assigned by combination of KCRVs assigned by consensus from participant results for each orthogonal impurity class. The relative expanded uncertainties reported by laboratories having results consistent with the KCRV ranged from 0.3% to 0.6% using a mass balance approach and 0.5% to 1% using a qNMR method. The major analytical challenge posed by the material proved to be the detection and quantification of a significant amount of oligomeric organic material within the sample and most participants relying on a mass balance approach displayed a positive bias relative to the KCRV (overestimation of aldrin content) in excess of 10 mg/g due to not having adequate procedures in place to detect and quantify the non-volatile content—specifically the non-volatile organics content—of the comparison sample. There was in general excellent agreement between participants in the identification and the quantification of the total and individual related structure impurities, water content and the residual solvent content of the sample. The comparison demonstrated the utility of 1H NMR as an independent method for quantitative analysis of high purity compounds. In discussion of the participant results it was noted that while several had access to qNMR estimates for the aldrin content that were inconsistent with their mass balance determination they decided to accept the mass balance result and assumed a hidden bias in their NMR data. By contrast, laboratories that placed greater confidence in their qNMR result were able to resolve the discrepancy through additional studies that provided evidence of the presence of non-volatile organic impurity at the requisite level to bring their mass balance and qNMR estimates into agreement.Fil: Westwood, Steven. Bureau International des Poids et Mesures (BIPM); FranciaFil: Josephs, Ralf. Bureau International des Poids et Mesures (BIPM); FranciaFil: Choteau, Tiphaine. Bureau International des Poids et Mesures (BIPM); FranciaFil: Daireaux, Adeline. Bureau International des Poids et Mesures (BIPM); FranciaFil: Mesquida, Charline. Bureau International des Poids et Mesures (BIPM); FranciaFil: Wielgosz, Robert. Bureau International des Poids et Mesures (BIPM); FranciaFil: Rosso, Adriana. Instituto Nacional de Tecnología Industrial (INTI); ArgentinaFil: Ruiz de Arechavaleta, Mariana. Instituto Nacional de Tecnología Industrial (INTI); ArgentinaFil: Davies, Stephen. National Measurement Institute (NMIA); AustraliaFil: Wang, Hongjie. National Measurement Institute (NMIA); AustraliaFil: Pires do Rego, Eliane Cristina. Instituto Nacional de Metrologia, Qualidade e Tecnologia (INMetro); BrasilFil: Marques Rodrigues, Janaína. Instituto Nacional de Metrologia, Qualidade e Tecnologia (INMetro); BrasilFil: de Freitas Guimarães, Evelyn. Instituto Nacional de Metrologia, Qualidade e Tecnologia (INMetro); BrasilFil: Barreto Sousa, Marcus Vinicius. Instituto Nacional de Metrologia, Qualidade e Tecnologia (INMetro); BrasilFil: Monteiro, Tânia Maria. Instituto Nacional de Metrologia, Qualidade e Tecnologia (INMetro); BrasilFil: Alves das Neves Valente, Laura. Instituto Nacional de Metrologia, Qualidade e Tecnologia (INMetro); BrasilFil: Marques Violante, Fernando Gustavo. Instituto Nacional de Metrologia, Qualidade e Tecnologia (INMetro); BrasilFil: Rubim, Renato. Instituto Nacional de Metrologia, Qualidade e Tecnologia (INMetro); BrasilFil: Almeida, Ribeiro. Instituto Nacional de Metrologia, Qualidade e Tecnologia (INMetro); BrasilFil: Baptista Quaresma, Maria Cristina. Instituto Nacional de Metrologia, Qualidade e Tecnologia (INMetro); BrasilFil: Nogueira, Raquel. Instituto Nacional de Metrologia, Qualidade e Tecnologia (INMetro); BrasilFil: Windust, Anthony. Institute for National Measurement Standards. National Research Council Canada (NRC-INMS); CanadáFil: Dai, Xinhua. National Institute of Metrology (NIM); ChinaFil: Li, Xiaomin. National Institute of Metrology (NIM); ChinaFil: Zhang, Wei. National Institute of Metrology (NIM); ChinaFil: Li, Ming. National Institute of Metrology (NIM); ChinaFil: Shao, Mingwu. National Institute of Metrology (NIM); ChinaFil: Wei, Chao. National Institute of Metrology (NIM); ChinaFil: Wong, Siu-kay. Government Laboratory of Hong Kong SAR (GLHK); ChinaFil: Cabillic, Julie. Laboratoire National de Métrologie et d’Essais (LNE); FranciaFil: Gantois, Fanny. Laboratoire National de Métrologie et d’Essais (LNE); FranciaFil: Philipp, Rosemarie. Bundesanstalt für Materialforschung (BAM); AlemaniaFil: Pfeifer, Dietmar. Bundesanstalt für Materialforschung (BAM); AlemaniaFil: Hein, Sebastian. Bundesanstalt für Materialforschung (BAM); AlemaniaFil: Klyk-Seitz, Urszula-Anna. Bundesanstalt für Materialforschung (BAM); AlemaniaFil: Ishikawa, Keiichiro. National Metrology Institute of Japan (NMIJ); JapónFil: Castro, Esther. Centro Nacional de Metrología (CENAM); MéxicoFil: Gonzalez, Norma. Centro Nacional de Metrología (CENAM); MéxicoFil: Krylov, Anatoly. D. I. Mendeleev Institute for Metrology (VNIIM); RusiaFil: Lin, Teo Tang. Health Sciences Authority (HSA); SingapurFil: Kooi, Lee Tong. Health Sciences Authority (HSA); SingapurFil: Fernandes-Whaley, M. National Metrology Institute of South Africa (NMISA); SudáfricaFil: Prévoo, D. National Metrology Institute of South Africa (NMISA); SudáfricaFil: Archer, M. National Metrology Institute of South Africa (NMISA); SudáfricaFil: Visser, R. National Metrology Institute of South Africa (NMISA); SudáfricaFil: Nlhapo, N. National Metrology Institute of South Africa (NMISA); SudáfricaFil: de Vos, B. National Metrology Institute of South Africa (NMISA); SudáfricaFil: Ahn, Seonghee. Korea Research Institute of Standards and Science (KRISS); Corea del SurFil: Pookrod, Preeyaporn. National Institute of Metrology of Thailand (NIMT); TailandiaFil: Wiangnon, Kanjana. National Institute of Metrology of Thailand (NIMT); TailandiaFil: Sudsiri, Nittaya. National Institute of Metrology of Thailand (NIMT); TailandiaFil: Muaksang, Kittiya. National Institute of Metrology of Thailand (NIMT); TailandiaFil: Cherdchu, Chainarong. National Institute of Metrology of Thailand (NIMT); TailandiaFil: Gören, Ahmet Ceyhan. National Metrology Institute (TUBITAK UME); TurquíaFil: Bilsel, Mine. National Metrology Institute (TUBITAK UME); TurquíaFil: LeGoff, Thierry. LGC Limited; Reino UnidoFil: Bearden, Dan. National Institute of Standards and Technology (NIST); Estados UnidosFil: Bedner, Mary. National Institute of Standards and Technology (NIST); Estados UnidosFil: Duewer, David. National Institute of Standards and Technology (NIST); Estados UnidosFil: Hancock, Diane. National Institute of Standards and Technology (NIST); Estados UnidosFil: Lang, Brian. National Institute of Standards and Technology (NIST); Estados UnidosFil: Lippa, Katrice. National Institute of Standards and Technology (NIST); Estados UnidosFil: Schantz, Michele. National Institute of Standards and Technology (NIST); Estados UnidosFil: Sieber, John. National Institute of Standards and Technology (NIST); Estados Unido

Rising rural body-mass index is the main driver of the global obesity epidemic in adults

Body-mass index (BMI) has increased steadily in most countries in parallel with a rise in the proportion of the population who live in cities(.)(1,2) This has led to a widely reported view that urbanization is one of the most important drivers of the global rise in obesity(3-6). Here we use 2,009 population-based studies, with measurements of height and weight in more than 112 million adults, to report national, regional and global trends in mean BMI segregated by place of residence (a rural or urban area) from 1985 to 2017. We show that, contrary to the dominant paradigm, more than 55% of the global rise in mean BMI from 1985 to 2017-and more than 80% in some low- and middle-income regions-was due to increases in BMI in rural areas. This large contribution stems from the fact that, with the exception of women in sub-Saharan Africa, BMI is increasing at the same rate or faster in rural areas than in cities in low- and middle-income regions. These trends have in turn resulted in a closing-and in some countries reversal-of the gap in BMI between urban and rural areas in low- and middle-income countries, especially for women. In high-income and industrialized countries, we noted a persistently higher rural BMI, especially for women. There is an urgent need for an integrated approach to rural nutrition that enhances financial and physical access to healthy foods, to avoid replacing the rural undernutrition disadvantage in poor countries with a more general malnutrition disadvantage that entails excessive consumption of low-quality calories.Peer reviewe