Optimization-based Secure Multi-hop Localization in Wireless Ad Hoc Networks

The problem of localizing nodes without GPS based on a small fraction of anchor nodes which are aware of their positions is considered to be an important service for applications in wireless ad hoc networks. With an adversary trying to mislead nodes about their estimated locations, several approaches aiming to defeat attackers by means of robustness instead of cryptographic measures have been proposed in the past. Nevertheless, these robust techniques focus on single-hop based localization. Hence, we investigate the impact of employing the well-known Least Median of Squares (LMS) algorithm in the context of the multi-hop based DV-hop approach. We argue that in this case LMS is no longer able to meet its requirements. We examine the source of this behavior and show that LMS leads to more accurate results when using the median to obtain average hop lengths in DV-hop. Furthermore, we investigate the feasibility of performing lateration using the l1-norm instead of the typically employed l2-norm, as well as the possibility of enhancing the robustness of LMS using lateration based on the l1-norm. Contrary to our expectations, the l1-norm only results in a slight, neglectable advantage compared to the computationally less expensive l2-norm lateration

Privacy-preserving spatiotemporal multicast for mobile information services

Mobile devices have become essential for accessing information services anywhere at any time. While the so-called geographic multicast (geocast) has been considered in detail in existing research, it only focuses on delivering messages to all mobile devices that are currently residing within a certain geographic area. This thesis extends this notion by introducing a Spatiotemporal Multicast (STM), which can informally be described as a "geocast into the past". Instead of addressing users based on their current locations, this concept relates to the challenge of sending a message to all devices that have resided within a geographic area at a certain time in the past. While a wide variety of applications can be envisioned for this concept, it presents several challenges to be solved. In order to deliver messages to all past visitors of a certain location, an STM service would have to fully track all user movements at all times. However, collecting this kind of information is not desirable considering the underlying privacy implications, i.e., users may not wish to be identified by the sender of a message as this can disclose sensitive personal information. Consequently, this thesis aims to provide a privacy-preserving notion of STM. In order to realize such a service, this work first presents a detailed overview of possible applications. Based on those, functional, non-functional, as well as security and privacy objectives are proposed. These objectives provide the foundation for an in-depth literature review of potential mechanisms for realizing an STM service. Among the suggested options, the most promising relies on Rendezvous Points (RPs) for datagram delivery. In simple terms, RPs represent "anonymous mailboxes" that are responsible for certain spatiotemporal regions. Messages are deposited at RPs so that users can retrieve them later on. Protecting the privacy of users then translates to obfuscating the responsibilities of RPs for specific spatiotemporal regions. This work proposes two realizations: CSTM, which relies on cryptographic hashing, and OSTM, which considers the use of order-preserving encryption in a CAN overlay. Both approaches are evaluated and compared in detail with respect to the given objectives. While OSTM yields superior performance-related properties, CSTM provides an increased ability of protecting the privacy of users.Mobilgeräte bilden heute die Grundlage allgegenwärtiger Informationsdienste. Während der sogenannte geografische Multicast (Geocast) hier bereits ausführlich erforscht worden ist, so bezieht sich dieser nur auf Geräte, welche sich aktuell innerhalb einer geografischen Zielregion befinden. Diese Arbeit erweitert dieses Konzept durch einen räumlich-zeitlichen Multicast, welcher sich informell als "Geocast in die Vergangenheit" beschreiben lässt. Dabei wird die Zustellung einer Nachricht an alle Nutzer betrachtet, die sich in der Vergangenheit an einem bestimmten Ort aufgehalten haben. Während eine Vielzahl von Anwendungen für dieses Konzept denkbar ist, so ergeben sich hier mehrere Herausforderungen. Um Nachrichten an ehemalige Besucher eines Ortes senden zu können, müsste ein räumlich-zeitlicher Multicast-Dienst die Bewegungen aller Nutzer vollständig erfassen. Aus Gründen des Datenschutzes ist das zentralisierte Sammeln solch sensibler personenbezogener Daten jedoch nicht wünschenswert. Diese Arbeit befasst sich daher insbesondere mit dem Schutz der Privatsphäre von Nutzern eines solchen Dienstes. Zur Entwicklung eines räumlich-zeitlichen Multicast-Dienstes erörtert diese Arbeit zunächst mögliche Anwendungen. Darauf aufbauend werden funktionale, nicht-funktionale, sowie Sicherheits- und Privatsphäre-relevante Anforderungen definiert. Diese bilden die Grundlage einer umfangreichen Literaturrecherche relevanter Realisierungstechniken. Der vielversprechendste Ansatz basiert hierbei auf der Hinterlegung von Nachrichten in sogenannten Rendezvous Points. Vereinfacht betrachtet stellen diese "anonyme Briefkästen" für bestimmte räumlich-zeitliche Regionen dar. Nachrichten werden in diesen so hinterlegt, dass legitime Empfänger sie dort später abholen können. Der Schutz der Nutzer-Privatsphäre entspricht dann der Verschleierung der Zuständigkeiten von Rendezvous Points für verschiedene räumlich-zeitliche Regionen. Diese Arbeit schlägt zwei Ansätze vor: CSTM, welches kryptografische Hashfunktionen nutzt, sowie OSTM, welches ordnungserhaltende Verschlüsselung in einem CAN Overlay einsetzt. Beide Optionen werden detailliert analytisch sowie empirisch bezüglich ihrer Diensteigenschaften untersucht und verglichen. Dabei zeigt sich, dass OSTM vorteilhaftere Leistungseigenschaften besitzt, während CSTM einen besseren Schutz der Nutzer-Privatsphäre bietet

Validation report which details the advanced models developed to describe a) static and continuous and b) dynamic force transfer standards taking into account sensitivity stability, temperature and other parasitic influences on the measurement uncertainty (target uncertainty is 1 % up to 100 Hz and 2 % between 100 - 1000 Hz)

Current document reports on the development and validation of advanced practical models for describing force measuring devices used for the measurement of static, continuous forces in part A as well as dynamic forces in part B of the report. In the force measurement applications, the sensitivity curve of the force measuring devices determined in the calibration gives the traceability to national standards. The measurement uncertainty in an application is mainly affected by the sensitivity stability, the influence of temperature and other parasitic components. To capture these effects an advanced model for static and continuous forces was developed in part A which describes these influences especially in respect of their contribution to the measurement uncertainty. In contrast to the static calibration procedure, the dynamic calibration of the sensor has been always challenging because of several reasons such as the sophisticated nature of dynamic measurement, insufficient structural equipment, and parasitic effects which yield higher measurement uncertainty in comparison to static measurements and therefore inappropriate characterization of the force transducers. To close this knowledge gap in the dynamic calibration, the advanced model for dynamic forces was developed in part B. To consider the dynamic properties of force measuring devices the frequency dependency of the sensitivity and the influence of parasitic influences from temperature of the force measuring devices was considered and described. The target uncertainty is 1 % for up to 100 Hz and the target uncertainty is 2 % for higher frequency range from 100 Hz up to 1000 Hz

Observation of associated near-side and away-side long-range correlations in √sNN=5.02 TeV proton-lead collisions with the ATLAS detector

Two-particle correlations in relative azimuthal angle (Δϕ) and pseudorapidity (Δη) are measured in √sNN=5.02  TeV p+Pb collisions using the ATLAS detector at the LHC. The measurements are performed using approximately 1  μb-1 of data as a function of transverse momentum (pT) and the transverse energy (ΣETPb) summed over 3.1<η<4.9 in the direction of the Pb beam. The correlation function, constructed from charged particles, exhibits a long-range (2<|Δη|<5) “near-side” (Δϕ∼0) correlation that grows rapidly with increasing ΣETPb. A long-range “away-side” (Δϕ∼π) correlation, obtained by subtracting the expected contributions from recoiling dijets and other sources estimated using events with small ΣETPb, is found to match the near-side correlation in magnitude, shape (in Δη and Δϕ) and ΣETPb dependence. The resultant Δϕ correlation is approximately symmetric about π/2, and is consistent with a dominant cos⁡2Δϕ modulation for all ΣETPb ranges and particle pT

Search for direct production of charginos and neutralinos in events with three leptons and missing transverse momentum in √s = 7 TeV pp collisions with the ATLAS detector

A search for the direct production of charginos and neutralinos in final states with three electrons or muons and missing transverse momentum is presented. The analysis is based on 4.7 fb−1 of proton–proton collision data delivered by the Large Hadron Collider and recorded with the ATLAS detector. Observations are consistent with Standard Model expectations in three signal regions that are either depleted or enriched in Z-boson decays. Upper limits at 95% confidence level are set in R-parity conserving phenomenological minimal supersymmetric models and in simplified models, significantly extending previous results

Search for new phenomena in final states with an energetic jet and large missing transverse momentum in pp collisions at √ s = 8 TeV with the ATLAS detector

Results of a search for new phenomena in final states with an energetic jet and large missing transverse momentum are reported. The search uses 20.3 fb−1 of √ s = 8 TeV data collected in 2012 with the ATLAS detector at the LHC. Events are required to have at least one jet with pT > 120 GeV and no leptons. Nine signal regions are considered with increasing missing transverse momentum requirements between Emiss T > 150 GeV and Emiss T > 700 GeV. Good agreement is observed between the number of events in data and Standard Model expectations. The results are translated into exclusion limits on models with either large extra spatial dimensions, pair production of weakly interacting dark matter candidates, or production of very light gravitinos in a gauge-mediated supersymmetric model. In addition, limits on the production of an invisibly decaying Higgs-like boson leading to similar topologies in the final state are presente

Single hadron response measurement and calorimeter jet energy scale uncertainty with the ATLAS detector at the LHC

The uncertainty on the calorimeter energy response to jets of particles is derived for the ATLAS experiment at the Large Hadron Collider (LHC). First, the calorimeter response to single isolated charged hadrons is measured and compared to the Monte Carlo simulation using proton-proton collisions at centre-of-mass energies of sqrt(s) = 900 GeV and 7 TeV collected during 2009 and 2010. Then, using the decay of K_s and Lambda particles, the calorimeter response to specific types of particles (positively and negatively charged pions, protons, and anti-protons) is measured and compared to the Monte Carlo predictions. Finally, the jet energy scale uncertainty is determined by propagating the response uncertainty for single charged and neutral particles to jets. The response uncertainty is 2-5% for central isolated hadrons and 1-3% for the final calorimeter jet energy scale.Comment: 24 pages plus author list (36 pages total), 23 figures, 1 table, submitted to European Physical Journal

Measurements of fiducial and differential cross sections for Higgs boson production in the diphoton decay channel at s√=8 TeV with ATLAS

Measurements of fiducial and differential cross sections are presented for Higgs boson production in proton-proton collisions at a centre-of-mass energy of s√=8 TeV. The analysis is performed in the H → γγ decay channel using 20.3 fb−1 of data recorded by the ATLAS experiment at the CERN Large Hadron Collider. The signal is extracted using a fit to the diphoton invariant mass spectrum assuming that the width of the resonance is much smaller than the experimental resolution. The signal yields are corrected for the effects of detector inefficiency and resolution. The pp → H → γγ fiducial cross section is measured to be 43.2 ±9.4(stat.) − 2.9 + 3.2 (syst.) ±1.2(lumi)fb for a Higgs boson of mass 125.4GeV decaying to two isolated photons that have transverse momentum greater than 35% and 25% of the diphoton invariant mass and each with absolute pseudorapidity less than 2.37. Four additional fiducial cross sections and two cross-section limits are presented in phase space regions that test the theoretical modelling of different Higgs boson production mechanisms, or are sensitive to physics beyond the Standard Model. Differential cross sections are also presented, as a function of variables related to the diphoton kinematics and the jet activity produced in the Higgs boson events. The observed spectra are statistically limited but broadly in line with the theoretical expectations