334 research outputs found

    Determination of micro-scale plastic strain caused by orthogonal cutting

    Get PDF
    An electron beam lithography technique has been used to produce microgrids in order to measure local plastic strains, induced during an orthogonal cutting process, at the microscopic scale in the shear zone and under the machined surface. Microgrids with a 10 μm pitch and a line width less than 1 μm have been printed on the polished surface of an aluminium alloy AA 5182 to test the applicability of the technique in metal cutting operations. Orthogonal cutting tests were carried out at 40 mm/s. Results show that the distortion of the grids could successfully be used to compute plastic strains due to orthogonal cutting with higher accuracy compared to other techniques reported in the literature. Strain maps of the machined specimens have been produced and show high-strain gradients very close to the machined surface with local values reaching 2.2. High-resolution strain measurements carried out in the primary deformation zone also provide new insight into the material deformation during the chip formation process

    Transport and Fate of MethyI Iodide and Its Pest Control in Soils

    Get PDF
    For fumigants, information on transport and fate, as well as pest control, is needed to develop management practices with the fewest human and environmental health risks while offering sufficient pest control efficacy. For this purpose, a 2-D soil chamber (60 cm wide, 60 cm long, and 6 cm thick) with a surface-mounted flux chamber was designed to determine volatilization, spatial and temporal distribution of soil gas-phase concentration, degradation and organism survivability after methyl iodide (MeI) fumigation. Three types of pests (barnyardgrass seed [Echinochloa crus-galli], citrus nematode [Tylenchulus semipenetrans], and fungi [Fusarium oxysporum]) were used to give a broad spectrum of pest control information. After MeI fumigation at a rate of 56.43 kg ha-1 for 24 hr, about 25.8 % of MeI was emitted into air, 6.8 % remained in the soil, and 43.6% degraded in the soil (based on the residual iodide concentration). The uncertainty in the measured MeI degradation using iodide concentration was thought to contribute to the unrecovered MeI (about 23%). Based on the spatial and temporal distribution of soil gas-phase concentration, the concentration-time index (CT) and its distribution was quantified. The citrus nematodes were effectively eliminated even at low CT values (< 30 µg hr ml-1) but all Fusarium oxysporum survived at the applied rate. The response of barnyardgrass seeds spatially varied with the concentration-time index (CT) values in the 2-D soil chamber. To fully control barnyardgrass seeds, CT of greater than 300 µg hr ml-1 was required. Using this experimental approach, different fumigant emission reduction strategies can be tested and mathematical models can be verified to determine which strategies produce least emission to atmosphere while maintaining sufficient pest control efficacy

    Morphological identification of animal hairs: Myths and misconceptions, possibilities and pitfalls

    Get PDF
    The examination of hair collected from crime scenes is an important and highly informative discipline relevant to many forensic investigations. However, the forensic identification of animal (non-human) hairs requires different skill sets and competencies to those required for human hair comparisons. The aim of this is paper is not only to highlight the intrinsic differences between forensic human hair comparison and forensic animal hair identification, but also discuss the utility and reliability of the two in the context of possibilities and pitfalls. It also addresses and dispels some of the more popular myths and misconceptions surrounding the microscopical examination of animal hairs. Furthermore, future directions of this discipline are explored through the proposal of recommendations for minimum standards for the morphological identification of animal hairs and the significance of the newly developed guidelines by SWGWILD is discussed

    Natural clusters of tuberous sclerosis complex (TSC)-associated neuropsychiatric disorders (TAND): new findings from the TOSCA TAND research project.

    Get PDF
    BACKGROUND: Tuberous sclerosis complex (TSC)-associated neuropsychiatric disorders (TAND) have unique, individual patterns that pose significant challenges for diagnosis, psycho-education, and intervention planning. A recent study suggested that it may be feasible to use TAND Checklist data and data-driven methods to generate natural TAND clusters. However, the study had a small sample size and data from only two countries. Here, we investigated the replicability of identifying natural TAND clusters from a larger and more diverse sample from the TOSCA study. METHODS: As part of the TOSCA international TSC registry study, this embedded research project collected TAND Checklist data from individuals with TSC. Correlation coefficients were calculated for TAND variables to generate a correlation matrix. Hierarchical cluster and factor analysis methods were used for data reduction and identification of natural TAND clusters. RESULTS: A total of 85 individuals with TSC (female:male, 40:45) from 7 countries were enrolled. Cluster analysis grouped the TAND variables into 6 clusters: a scholastic cluster (reading, writing, spelling, mathematics, visuo-spatial difficulties, disorientation), a hyperactive/impulsive cluster (hyperactivity, impulsivity, self-injurious behavior), a mood/anxiety cluster (anxiety, depressed mood, sleep difficulties, shyness), a neuropsychological cluster (attention/concentration difficulties, memory, attention, dual/multi-tasking, executive skills deficits), a dysregulated behavior cluster (mood swings, aggressive outbursts, temper tantrums), and an autism spectrum disorder (ASD)-like cluster (delayed language, poor eye contact, repetitive behaviors, unusual use of language, inflexibility, difficulties associated with eating). The natural clusters mapped reasonably well onto the six-factor solution generated. Comparison between cluster and factor solutions from this study and the earlier feasibility study showed significant similarity, particularly in cluster solutions. CONCLUSIONS: Results from this TOSCA research project in an independent international data set showed that the combination of cluster analysis and factor analysis may be able to identify clinically meaningful natural TAND clusters. Findings were remarkably similar to those identified in the earlier feasibility study, supporting the potential robustness of these natural TAND clusters. Further steps should include examination of larger samples, investigation of internal consistency, and evaluation of the robustness of the proposed natural clusters

    Test beam performance measurements for the Phase I upgrade of the CMS pixel detector

    Get PDF
    A new pixel detector for the CMS experiment was built in order to cope with the instantaneous luminosities anticipated for the Phase I Upgrade of the LHC. The new CMS pixel detector provides four-hit tracking with a reduced material budget as well as new cooling and powering schemes. A new front-end readout chip mitigates buffering and bandwidth limitations, and allows operation at low comparator thresholds. In this paper, comprehensive test beam studies are presented, which have been conducted to verify the design and to quantify the performance of the new detector assemblies in terms of tracking efficiency and spatial resolution. Under optimal conditions, the tracking efficiency is (99.95 ± 0.05) %, while the intrinsic spatial resolutions are (4.80 ± 0.25) μm and (7.99 ± 0.21) μm along the 100 μm and 150 μm pixel pitch, respectively. The findings are compared to a detailed Monte Carlo simulation of the pixel detector and good agreement is found.Peer reviewe

    Measurements of differential production cross sections for a Z boson in association with jets in pp collisions at root s=8 TeV

    Get PDF
    Peer reviewe

    Search for leptophobic Z ' bosons decaying into four-lepton final states in proton-proton collisions at root s=8 TeV

    Get PDF
    Peer reviewe

    Search for black holes and other new phenomena in high-multiplicity final states in proton-proton collisions at root s=13 TeV

    Get PDF
    Peer reviewe

    Search for high-mass diphoton resonances in proton-proton collisions at 13 TeV and combination with 8 TeV search

    Get PDF
    Peer reviewe
    corecore