Elliptic flow of charged particles in Pb-Pb collisions at 2.76 TeV

We report the first measurement of charged particle elliptic flow in Pb-Pb collisions at 2.76 TeV with the ALICE detector at the CERN Large Hadron Collider. The measurement is performed in the central pseudorapidity region (|$\eta$|<0.8) and transverse momentum range 0.2< $p_{\rm T}$< 5.0 GeV/$c$. The elliptic flow signal v$_2$, measured using the 4-particle correlation method, averaged over transverse momentum and pseudorapidity is 0.087 $\pm$ 0.002 (stat) $\pm$ 0.004 (syst) in the 40-50% centrality class. The differential elliptic flow v$_2(p_{\rm T})$ reaches a maximum of 0.2 near $p_{\rm T}$ = 3 GeV/$c$. Compared to RHIC Au-Au collisions at 200 GeV, the elliptic flow increases by about 30%. Some hydrodynamic model predictions which include viscous corrections are in agreement with the observed increase.Comment: 10 pages, 4 captioned figures, published version, figures at http://aliceinfo.cern.ch/ArtSubmission/node/389

Higher harmonic anisotropic flow measurements of charged particles in Pb-Pb collisions at 2.76 TeV

We report on the first measurement of the triangular $v_3$, quadrangular $v_4$, and pentagonal $v_5$ charged particle flow in Pb-Pb collisions at 2.76 TeV measured with the ALICE detector at the CERN Large Hadron Collider. We show that the triangular flow can be described in terms of the initial spatial anisotropy and its fluctuations, which provides strong constraints on its origin. In the most central events, where the elliptic flow $v_2$ and $v_3$ have similar magnitude, a double peaked structure in the two-particle azimuthal correlations is observed, which is often interpreted as a Mach cone response to fast partons. We show that this structure can be naturally explained from the measured anisotropic flow Fourier coefficients.Comment: 10 pages, 4 figures, published version, figures at http://aliceinfo.cern.ch/ArtSubmission/node/387

Controversy and consensus on the management of elevated sperm DNA fragmentation in male infertility: A global survey, current guidelines, and expert recommendations

Purpose Sperm DNA fragmentation (SDF) has been associated with male infertility and poor outcomes of assisted reproductive technology (ART). The purpose of this study was to investigate global practices related to the management of elevated SDF in infertile men, summarize the relevant professional society recommendations, and provide expert recommendations for managing this condition. Materials and Methods An online global survey on clinical practices related to SDF was disseminated to reproductive clinicians, according to the CHERRIES checklist criteria. Management protocols for various conditions associated with SDF were captured and compared to the relevant recommendations in professional society guidelines and the appropriate available evidence. Expert recommendations and consensus on the management of infertile men with elevated SDF were then formulated and adapted using the Delphi method. Results A total of 436 experts from 55 different countries submitted responses. As an initial approach, 79.1% of reproductive experts recommend lifestyle modifications for infertile men with elevated SDF, and 76.9% prescribe empiric antioxidants. Regarding antioxidant duration, 39.3% recommend 4–6 months and 38.1% recommend 3 months. For men with unexplained or idiopathic infertility, and couples experiencing recurrent miscarriages associated with elevated SDF, most respondents refer to ART 6 months after failure of conservative and empiric medical management. Infertile men with clinical varicocele, normal conventional semen parameters, and elevated SDF are offered varicocele repair immediately after diagnosis by 31.4%, and after failure of antioxidants and conservative measures by 40.9%. Sperm selection techniques and testicular sperm extraction are also management options for couples undergoing ART. For most questions, heterogenous practices were demonstrated. Conclusions This paper presents the results of a large global survey on the management of infertile men with elevated SDF and reveals a lack of consensus among clinicians. Furthermore, it demonstrates the scarcity of professional society guidelines in this regard and attempts to highlight the relevant evidence. Expert recommendations are proposed to help guide clinicians

Koulutusluokitus : Koulutuskoodimuutokset vuonna 1989, Liite 3

A measurement of inclusive ZZ production cross section and constraints on anomalous triple gauge couplings in proton-proton collisions at $\sqrt{s}$ = 8 TeV are presented. A data sample, corresponding to an integrated luminosity of 19.6 inverse-femtobarns was collected with the CMS experiment at the LHC. The measurements are performed in the leptonic decay modes $ZZ \to lll'l'$, where $l = e, \mu$ and $l' = e, \mu, \tau$. The measured total cross section, $\sigma (pp \to ZZ) = 7.7 \pm 0.5 (stat.)^{+0.5}_{-0.4} (syst.) \pm 0.4 (theo.) \pm 0.2 (lum.) pb$ for both Z bosons produced in the mass range $m_Z$ within 60 and 120 GeV, is consistent with standard model predictions. Differential cross sections are measured and well described by the theoretical predictions. The invariant mass distribution of the four-lepton system is used to set limits on anomalous ZZZ and ZZ$\gamma$ couplings at the 95% confidence level: $f_4^Z$ in (-0.004,+0.004), $f_5^Z$ in (-0.005,+0.005), $f_4^\gamma$ in (-0.004,+0.004), and $f_5^\gamma$ in (-0.005,+0.005)

Alignment of the CMS tracker with LHC and cosmic ray data

The central component of the CMS detector is the largest silicon tracker ever built. The precise alignment of this complex device is a formidable challenge, and only achievable with a significant extension of the technologies routinely used for tracking detectors in the past. This article describes the full-scale alignment procedure as it is used during LHC operations. Among the specific features of the method are the simultaneous determination of up to 200 000 alignment parameters with tracks, the measurement of individual sensor curvature parameters, the control of systematic misalignment effects, and the implementation of the whole procedure in a multiprocessor environment for high execution speed. Overall, the achieved statistical accuracy on the module alignment is found to be significantly better than 10 mu m

Search for a standard model-like Higgs boson in the mu(+)mu(-) and e(+)e(-) decay channels at the LHC

A search is presented for a standard model-like Higgs boson decaying to the mu(+)mu(-) or e(+)e(-) final states based on proton-proton collisions recorded by the CMS experiment at the CERN LHC. The data correspond to integrated luminosities of 5.0 fb(-1) at a centre-of-mass energy of 7 TeV and 19.7 fb(-1) at 8 TeV for the mu(+)mu(-) search, and of 19.7 fb(-1) at 8 TeV for the e(+)e(-) search. Upper limits on the production cross section times branching fraction at the 95% confidence level are reported for Higgs boson masses in the range from 120 to 150 GeV. For a Higgs boson with a mass of 125 GeV decaying to mu(+)mu(-), the observed (expected) upper limit on the production rate is found to be 7.4 (6.5(-1.9)(+2.8)) times the standard model value. This corresponds to an upper limit on the branching fraction of 0.0016. Similarly, for e(+)e(-), an upper limit of 0.0019 is placed on the branching fraction, which is approximate to 3.7 x 10(5) times the standard model value. These results, together with recent evidence of the 125 GeV boson coupling to tau-leptons with a larger branching fraction consistent with the standard model, confirm that the leptonic couplings of the new boson are not flavour-universal

Measurement of the production cross section for a W boson and two b jets in pp collisions at root s=7 TeV

The production cross section for a Wboson and two b jets is measured using proton-proton collisions at v root s = 7 TeV in a data sample collected with the CMS experiment at the LHC corresponding to an integrated luminosity of 5.0 fb(-1). The W + bbevents are selected in the W..decay mode by requiring a muon with transverse momentum pT> 25GeVand pseudorapidity |eta| 25GeVand |eta| < 2.4. The measured W + bbproduction cross section in the fiducial region, calculated at the level of final-state particles, is s(pp. W + bb) xB(W..) = 0.53 +/- 0.05 (stat.) +/- 0.09 (syst.) +/- 0.06 (theo.) 0.01 (lum.) pb, in agreement with the standard model prediction. In addition, kinematic distributions of the W + bbsystem are in agreement with the predictions of a simulation usingMadGraphandpythia

Search for supersymmetry in pp collisions at in events with a single lepton, large jet multiplicity, and multiple b jets

Results are reported from a search for supersymmetry in pp collisions at a center-of-mass energy of 8 TeV, based on events with a single isolated lepton (electron or muon) and multiple jets, at least two of which are identified as b jets. The data sample corresponds to an integrated luminosity of 19.3 fb(-1) recorded by the CMS experiment at the LHC in 2012. The search is motivated by supersymmetric models that involve strong-production processes and cascade decays of new particles. The resulting final states contain multiple jets as well as missing transverse momentum from weakly interacting particles. The event yields, observed across several kinematic regions, are consistent with the expectations from standard model processes. The results are interpreted in the context of simplified supersymmetric scenarios with pair production of gluinos, where each gluino decays to a top quark-antiquark pair and the lightest neutralino. For the case of decays via virtual top squarks, gluinos with a mass smaller than 1.26 TeV are excluded for low neutralino masses

Description and performance of track and primary-vertex reconstruction with the CMS tracker

A description is provided of the software algorithms developed for the CMS tracker both for reconstructing charged-particle trajectories in proton-proton interactions and for using the resulting tracks to estimate the positions of the LHC luminous region and individual primary-interaction vertices. Despite the very hostile environment at the LHC, the performance obtained with these algorithms is found to be excellent. For t (t) over bar events under typical 2011 pileup conditions, the average track-reconstruction efficiency for promptly-produced charged particles with transverse momenta of p(T) > 0.9GeV is 94% for pseudorapidities of vertical bar eta vertical bar < 0.9 and 85% for 0.9 < vertical bar eta vertical bar < 2.5. The inefficiency is caused mainly by hadrons that undergo nuclear interactions in the tracker material. For isolated muons, the corresponding efficiencies are essentially 100%. For isolated muons of p(T) = 100GeV emitted at vertical bar eta vertical bar < 1.4, the resolutions are approximately 2.8% in p(T), and respectively, 10 m m and 30 mu m in the transverse and longitudinal impact parameters. The position resolution achieved for reconstructed primary vertices that correspond to interesting pp collisions is 10-12 mu m in each of the three spatial dimensions. The tracking and vertexing software is fast and flexible, and easily adaptable to other functions, such as fast tracking for the trigger, or dedicated tracking for electrons that takes into account bremsstrahlung