Variation in the spatial distribution of erector spinae activity during a lumbar endurance task in people with low back pain

© 2019 Anatomical Society This study aimed to investigate the spatial distribution and redistribution of lumbar erector spinae (ES) activity during a lumbar extension endurance task in pain-free participants and how this is modified in people with low back pain (LBP). High density surface electromyography (HDEMG) was recorded using 13 × 5 electrode grids placed over the lumbar ES in 13 LBP and 13 control participants while completing an Ito test to task failure. The root mean square of the HDEMG signals was computed, a topographical map of the EMG amplitude generated and the centre of the activity (centroid) determined throughout the task. The centroid of the EMG amplitude map was systematically more cranial (F = 6.09, P = 0.022) for the LBP participants compared with the control subjects. Regression analysis showed that the extent of redistribution of ES activity was associated with longer endurance. These results show that LBP participants utilised a different motor strategy to perform the endurance task, characterised by greater activation of more cranial regions of the ES and less redistribution of ES activity throughout the task. This study provides new insight into the functional activation of the lumbar ES and how it is modified when people have pain

Genome-wide expression profiling of urinary bladder implicates desmosomal and cytoskeletal dysregulation in the bladder exstrophy-epispadias complex

The bladder exstrophy-epispadias complex (BEEC) represents a spectrum of urological abnormalities where part, or all, of the distal urinary tract fails to close during development, becoming exposed on the outer abdominal wall. While the etiology of BEEC remains unknown, strong evidence exists that genetic factors are implicated. To understand the pathways regulating embryonic bladder development and to identify high-probability BEEC candidate genes, we conducted a genome-wide expression profiling (GWEP) study using normal and exstrophic human urinary bladders and human and mouse embryologic bladder-precursor tissues. We identified 162 genes differentially expressed in both embryonic and postnatal human samples. Pathway analysis of these genes revealed 11 biological networks with top functions related to skeletal and muscular system development, cellular assembly and development, organ morphology, or connective tissue disorders. The two most down-regulated genes desmin (DES, fold-change, -74.7) and desmuslin (DMN, fold-change, -53.0) are involved in desmosome mediated cell-cell adhesion and cytoskeletal architecture. Intriguingly, the sixth most overexpressed gene was desmoplakin (DSP, fold-change, +48.8), the most abundant desmosomal protein. We found 30% of the candidate genes to be directly associated with desmosome structure/function or cytoskeletal assembly, pointing to desmosomal and/or cytoskeletal deregulation as an etiologic factor for BEEC. Further findings indicate that p63, PERP, SYNPO2 and the Wnt pathway may also contribute to BEEC etiology. This study provides the first expression profile of urogenital genes during bladder development and points to the high-probability candidate genes for BEEC

8. EXPERIENCIAS EN EL TRATAMIENTO TÉRMICO DE ACEROS PARA ASEGURAMIENTO DE LA VALIDEZ DE LOS RESULTADOS EN DUREZA ROCKWELL C

Los laboratorios que siguen la norma ISO/IEC 17025 deben asegurar la validez de los resultados cuando ejecutan rutinariamente calibraciones y ensayos, en el caso de la dureza Rockwell, varios de los procedimientos de aseguramiento involucran el uso de materiales homogéneos, a excepción de los materiales de referencia certificados, los aceros en estado de suministro comercial presentan una no homogeneidad en la dureza bastante alta y después del tratamiento térmico comercial, esta persiste. En el presente trabajo se realiza el control de los parámetros de ciclos de tratamiento térmico para tres aceros (AISI 4140, AISI O1 y uno similar al AISI D2), con el fin de obtener una homogeneidad cercana a las estipuladas en la norma ASTM E18-19 para los rangos de dureza de la escala Rockwell C referentes a los bloques patrón. Para confirmar la homogeneidad de los tratamientos térmicos se realizaron mediciones de dureza HRC en un durómetro previamente verificado y análisis metalográficos, encontrando que la variación de temperaturas del tratamiento térmico influye en la homogeneidad de la dureza

8. EXPERIENCIAS EN EL TRATAMIENTO TÉRMICO DE ACEROS PARA ASEGURAMIENTO DE LA VALIDEZ DE LOS RESULTADOS EN DUREZA ROCKWELL C

Los laboratorios que siguen la norma ISO/IEC 17025 deben asegurar la validez de los resultados cuando ejecutan rutinariamente calibraciones y ensayos, en el caso de la dureza Rockwell, varios de los procedimientos de aseguramiento involucran el uso de materiales homogéneos, a excepción de los materiales de referencia certificados, los aceros en estado de suministro comercial presentan una no homogeneidad en la dureza bastante alta y después del tratamiento térmico comercial, esta persiste. En el presente trabajo se realiza el control de los parámetros de ciclos de tratamiento térmico para tres aceros (AISI 4140, AISI O1 y uno similar al AISI D2), con el fin de obtener una homogeneidad cercana a las estipuladas en la norma ASTM E18-19 para los rangos de dureza de la escala Rockwell C referentes a los bloques patrón. Para confirmar la homogeneidad de los tratamientos térmicos se realizaron mediciones de dureza HRC en un durómetro previamente verificado y análisis metalográficos, encontrando que la variación de temperaturas del tratamiento térmico influye en la homogeneidad de la dureza

Optical and mechanical properties of cocona chips as affected by the drying process

[EN] The effect of the application of a pre-osmotic treatment to obtain hot air dried cocona(Solanum sessiliofurum Dunal) chips was studied. The drying kinetics and the optical andmechanical properties of cocona chips obtained by the combined method of osmotic dehy-dration and hot air drying (OD + HAD) and by only hot air drying (HAD) were compared.Samples were dried by hot air at 60◦C. For the combined method, they were pre-dried toa moisture content of 75 gwater/100 g, immersed in a 55◦Brix sucrose solution at 25◦C for48 min. The pre-osmodehydration applied did not influence the subsequent hot air dryingkinetics, resulting in a final product with 0.055 ± 0.005 gwater/gcocona.The optical properties ofOD + HAD chips were more favorable, exhibiting a smaller color change with respect to thefresh fruit (±15 units) than the HAD samples (±23 units). On the other hand, the OD + HADchips presented more fracture peaks than HAD ones, this related with a structure with ahigher degree of crispness, a very desirable property for a chip product.The authors thank the Universidad Politecnica de Valencia for the financial support given throughout the Project ADSIDEO-COOPERACION 2010 "Adaptacion de procesos de secado para favorecer la comercializacion de super frutas de origen colombiano".Agudelo Sterling, CM.; Igual Ramo, M.; Talens Oliag, P.; Martínez Navarrete, N. (2015). Optical and mechanical properties of cocona chips as affected by the drying process. Food and Bioproducts Processing. 95:192-199. doi:10.1016/j.fbp.2015.05.009S1921999

Osteoporosis-related life habits and knowledge about osteoporosis among women in El Salvador: A cross-sectional study

BACKGROUND: Osteoporosis is a systemic skeletal disorder, characterized by reduced bone mass, deterioration of bone structure, increased bone fragility, and increased fracture risk. It is more frequent to find among women than men at a 4:1 ratio. Evidence suggests that to adopt changes on some life habits can prevent or delay development of osteoporosis. Several osteoporosis-risk factors have been confirmed in the US and western Europe, but in El Salvador there are neither reliable epidemiological statistics about this skeletal disorder nor studies addressing osteoporosis-risk factors in women. The aim of this study was to determinate the extent of osteoporosis knowledge, the levels of both daily calcium intake and weight-bearing physical activity, and the influence of several osteoporosis-risk factors on these variables in three age groups of Salvadorean women. METHODS: In this exploratory cross-sectional study, an osteoporosis knowledge assessment questionnaire incluiding a food frequency and a physical activity record section were used to collect data and it was delivered through a face-to-face interview. A convenience sample (n = 197) comprised of three groups of women aged 25–35 years, 36–49 years, and over 49 years was taken. Among-group comparisons of means were analyzed by two-way ANOVA. To determinate the overall influence of osteoporosis-risk factors, the multivariate analysis was used. RESULTS: Study results indicated that better educated women had more knowledge about osteoporosis than women with a low education level, regardless of age, even though this knowledge was rather fair. Older women got more weight-bearing physical activity at home and less at place of employment than reported by the younger women; however, neither group performed sufficient high-intensity WBPA to improve bone mass. Regardless of age, the most women consumed 60% or less than the Dietary Reference Intake of calcium and depend on household income, lactose intolerance and coffee rather than milk consumption. CONCLUSION: In summary, the majority of women in this study have modest knowledge on osteoporosis. The knowledge base is not linked to preventive health habits, including sufficient calcium intake and performance of weight-bearing physical activities. They are thus at increased risk for low bone mass

Phosphoproteomic analysis of neoadjuvant breast cancer suggests that increased sensitivity to paclitaxel is driven by CDK4 and filamin A

Precision oncology research is challenging outside the contexts of oncogenic addiction and/or targeted therapies. We previously showed that phosphoproteomics is a powerful approach to reveal patient subsets of interest characterized by the activity of a few kinases where the underlying genomics is complex. Here, we conduct a phosphoproteomic screening of samples from HER2-negative female breast cancer receiving neoadjuvant paclitaxel (N = 130), aiming to find candidate biomarkers of paclitaxel sensitivity. Filtering 11 candidate biomarkers through 2 independent patient sets (N= 218) allowed the identification of a subgroup of patients characterized by high levels of CDK4 and filamin-A who had a 90% chance of achieving a pCR in response to paclitaxel. Mechanistically, CDK4 regulates filamin-A transcription, which in turn forms a complex with tubulin and CLIP-170, which elicits increased binding of paclitaxel to microtubules, microtubule acetylation and stabilization, and mitotic catastrophe. Thus, phosphoproteomics allows the identification of explainable factors for predicting response to paclitaxel

WNT signalling in prostate cancer

Genome sequencing and gene expression analyses of prostate tumours have highlighted the potential importance of genetic and epigenetic changes observed in WNT signalling pathway components in prostate tumours-particularly in the development of castration-resistant prostate cancer. WNT signalling is also important in the prostate tumour microenvironment, in which WNT proteins secreted by the tumour stroma promote resistance to therapy, and in prostate cancer stem or progenitor cells, in which WNT-β-catenin signals promote self-renewal or expansion. Preclinical studies have demonstrated the potential of inhibitors that target WNT receptor complexes at the cell membrane or that block the interaction of β-catenin with lymphoid enhancer-binding factor 1 and the androgen receptor, in preventing prostate cancer progression. Some WNT signalling inhibitors are in phase I trials, but they have yet to be tested in patients with prostate cancer

Measurements of fiducial and differential cross sections for Higgs boson production in the diphoton decay channel at s√=8 TeV with ATLAS

Measurements of fiducial and differential cross sections are presented for Higgs boson production in proton-proton collisions at a centre-of-mass energy of s√=8 TeV. The analysis is performed in the H → γγ decay channel using 20.3 fb−1 of data recorded by the ATLAS experiment at the CERN Large Hadron Collider. The signal is extracted using a fit to the diphoton invariant mass spectrum assuming that the width of the resonance is much smaller than the experimental resolution. The signal yields are corrected for the effects of detector inefficiency and resolution. The pp → H → γγ fiducial cross section is measured to be 43.2 ±9.4(stat.) − 2.9 + 3.2 (syst.) ±1.2(lumi)fb for a Higgs boson of mass 125.4GeV decaying to two isolated photons that have transverse momentum greater than 35% and 25% of the diphoton invariant mass and each with absolute pseudorapidity less than 2.37. Four additional fiducial cross sections and two cross-section limits are presented in phase space regions that test the theoretical modelling of different Higgs boson production mechanisms, or are sensitive to physics beyond the Standard Model. Differential cross sections are also presented, as a function of variables related to the diphoton kinematics and the jet activity produced in the Higgs boson events. The observed spectra are statistically limited but broadly in line with the theoretical expectations

Search for squarks and gluinos in events with isolated leptons, jets and missing transverse momentum at s√=8 TeV with the ATLAS detector

The results of a search for supersymmetry in final states containing at least one isolated lepton (electron or muon), jets and large missing transverse momentum with the ATLAS detector at the Large Hadron Collider are reported. The search is based on proton-proton collision data at a centre-of-mass energy s√=8 TeV collected in 2012, corresponding to an integrated luminosity of 20 fb−1. No significant excess above the Standard Model expectation is observed. Limits are set on supersymmetric particle masses for various supersymmetric models. Depending on the model, the search excludes gluino masses up to 1.32 TeV and squark masses up to 840 GeV. Limits are also set on the parameters of a minimal universal extra dimension model, excluding a compactification radius of 1/R c = 950 GeV for a cut-off scale times radius (ΛR c) of approximately 30