Sintered Bottom and Vitrified Silica Ashes Derived from Incinerated Municipal Solid Waste as Circular Economy-Friendly Partial Replacements for Cement in Mortars

Sintered bottom ash (SBA) and vitrified ash (VA) derived from the incineration of municipal solid waste (MSW) at 1200 °C were used in this study as replacements for Type 2 Portland cement (CEM-II) based mortars. This approach negates the need to send them to landfill, benefits the circular economy and contributes towards the decarbonisation of cementitious construction materials in response to international net zero carbon emission agendas. The material (physico-chemical) characteristics of VA and SBA were analysed before being used as partial replacements for CEM-II in mortars, whereby compressive strength (CS) was the primary criterion for assessing engineering performance. VA and SBA replaced CEM-II at dosages of 10%, 25% and 50% based on their high inorganic and pozzolanic contents; whereby the 10% and 25% replacements did not compromise mortar strength. The alkalinity and pozzolanic properties of SBA collectively indicated it has greater potential as a cementitious material over VA, which possessed a neutral pH. The 28-day CS recorded for mixtures containing 25% VA and 10% SBA were 13.74 MPa and 11.77 MPa, respectively compared with 17.06 MPa for CEM-II control samples. The use of 2% additional water in 25% SBA mortar designs improved strength further, indicating that SBA’s water retention properties permitted further hydration and strength development with curing. Microstructural, mineralogical and infrared spectroscopy analyses indicated that these strengths were owed to the formation of silicate-based hydration products. The outcomes from this study highlight that SBA has potential for replacing CEM-II and VA as a filler in cementitious mortar. Graphical Abstract: [Figure not available: see fulltext.]</p

Hantavirus Pulmonary Syndrome: CD8+and CD4+Cytotoxic T Lymphocytes to Epitopes on Sin Nombre Virus Nucleocapsid Protein Isolated during Acute Illness

AbstractIn 1993 a number of cases of unexplained adult respiratory syndrome occurred in the southwestern United States. The illness was characterized by a prodrome of fever, myalgia, and other symptoms followed by the rapid onset of a capillary leak syndrome with hemoconcentration, thrombocytopenia, and pulmonary edema. Viral RNA sequences in the lungs identified a new member of the hantavirus genus, Sin Nombre virus (SNV), unique to North America. Pulmonary endothelial cells were heavily infected but were not necrotic. We speculated that this capillary leak syndrome was initiated by immune responses to the SNV-infected pulmonary endothelial cells. We isolated a CD8+cytotoxic T lymphocyte (CTL) clone directly from the blood of a patient with the acute hantavirus pulmonary syndrome (HPS) which recognizes a SNV specific epitope on the virus nucleocapsid protein (aa 234–242) that is restricted by HLA C7 and produces IFNγ but not IL-4. We identified a second CD8+CTL epitope located within another site aa 131–139 on the nucleocapsid protein, which is HLA B35 restricted, and a CD4+CTL epitope located on a third site on nucleocapsid protein aa 372–380 using lymphocytes obtained during HPS from another patient that were stimulatedin vitro.Hantavirus specific CD8+and CD4+CTL may contribute to the immunopathology and capillary leak syndrome observed in the HPS

Characterization of viscoplasticity behaviour of P91 and P92 power plant steels

This paper deals with the determination of material constitutive model for P91 and P92 steels at high temperatures. An isothermal, strain-controlled test programme was conducted for both steels for a temperature range between 400 and 675 °C. The experimental data from these tests were used to obtain the material constants in a viscoplasticity model. The model includes the effects of isotropic and kinematic hardening, as well as time-dependent effects, and has been used to model the cyclic material behaviour of each material. Material constants were initially determined from initial cycle stress–strain data, maximum stress evolution data and stress relaxation data. The material constants were improved by use of a least-squares optimisation algorithm. The constitutive models have been implemented into the ABAQUS finite element (FE) code by using the Z-mat software. The performances of the material models for both steels have been assessed by comparing predictions with experimental data obtained from the tests

Fit for purpose? A cross-sectional study to evaluate the acceptability and usability of HeadUp, a novel neck support collar for neurological neck weakness

The HeadUp collar (previously known as the Sheffield Support Snood) provides support for neck weakness caused by amyotrophic lateral sclerosis (ALS) and has shown to be superior to alternative options in a small cohort of patients from one single center. Here we report the assessment of the HeadUp collar in a larger cohort of patients, exploring the use in other neurological conditions and expanding to other centers across the UK and Ireland. An interventional cross-sectional study design was implemented to investigate the usability and acceptability of the HeadUp collar. A total of 139 patients were recruited for the study, 117 patients had a diagnosis of ALS and 22 patients presented with neck weakness due to other neurological conditions. Participants were assessed at baseline, fitted a HeadUp collar and followed-up one month later. The performance of the HeadUp collar was rated favorably compared to previously worn collars in terms of the ability to eat, drink and swallow. Findings suggest that the collar also permitted a more acceptable range of head movements whilst maintaining a good level of support. We conclude that the HeadUp collar is a suitable option for patients with neck weakness due to ALS and other neurological conditions

Measurement of the cross section for isolated-photon plus jet production in pp collisions at √s=13 TeV using the ATLAS detector

The dynamics of isolated-photon production in association with a jet in proton–proton collisions at a centre-of-mass energy of 13 TeV are studied with the ATLAS detector at the LHC using a dataset with an integrated luminosity of 3.2 fb−1. Photons are required to have transverse energies above 125 GeV. Jets are identified using the anti- algorithm with radius parameter and required to have transverse momenta above 100 GeV. Measurements of isolated-photon plus jet cross sections are presented as functions of the leading-photon transverse energy, the leading-jet transverse momentum, the azimuthal angular separation between the photon and the jet, the photon–jet invariant mass and the scattering angle in the photon–jet centre-of-mass system. Tree-level plus parton-shower predictions from Sherpa and Pythia as well as next-to-leading-order QCD predictions from Jetphox and Sherpa are compared to the measurements

A search for resonances decaying into a Higgs boson and a new particle X in the XH → qqbb final state with the ATLAS detector

A search for heavy resonances decaying into a Higgs boson (H) and a new particle (X) is reported, utilizing 36.1 fb−1 of proton–proton collision data at collected during 2015 and 2016 with the ATLAS detector at the CERN Large Hadron Collider. The particle X is assumed to decay to a pair of light quarks, and the fully hadronic final state is analysed. The search considers the regime of high XH resonance masses, where the X and H bosons are both highly Lorentz-boosted and are each reconstructed using a single jet with large radius parameter. A two-dimensional phase space of XH mass versus X mass is scanned for evidence of a signal, over a range of XH resonance mass values between 1 TeV and 4 TeV, and for X particles with masses from 50 GeV to 1000 GeV. All search results are consistent with the expectations for the background due to Standard Model processes, and 95% CL upper limits are set, as a function of XH and X masses, on the production cross-section of the resonance

The performance of the jet trigger for the ATLAS detector during 2011 data taking

The performance of the jet trigger for the ATLAS detector at the LHC during the 2011 data taking period is described. During 2011 the LHC provided proton–proton collisions with a centre-of-mass energy of 7 TeV and heavy ion collisions with a 2.76 TeV per nucleon–nucleon collision energy. The ATLAS trigger is a three level system designed to reduce the rate of events from the 40 MHz nominal maximum bunch crossing rate to the approximate 400 Hz which can be written to offline storage. The ATLAS jet trigger is the primary means for the online selection of events containing jets. Events are accepted by the trigger if they contain one or more jets above some transverse energy threshold. During 2011 data taking the jet trigger was fully efficient for jets with transverse energy above 25 GeV for triggers seeded randomly at Level 1. For triggers which require a jet to be identified at each of the three trigger levels, full efficiency is reached for offline jets with transverse energy above 60 GeV. Jets reconstructed in the final trigger level and corresponding to offline jets with transverse energy greater than 60 GeV, are reconstructed with a resolution in transverse energy with respect to offline jets, of better than 4 % in the central region and better than 2.5 % in the forward direction

Measurement of the View the tt production cross-section using eμ events with b-tagged jets in pp collisions at √s = 13 TeV with the ATLAS detector

This paper describes a measurement of the inclusive top quark pair production cross-section (σtt¯) with a data sample of 3.2 fb−1 of proton–proton collisions at a centre-of-mass energy of √s = 13 TeV, collected in 2015 by the ATLAS detector at the LHC. This measurement uses events with an opposite-charge electron–muon pair in the final state. Jets containing b-quarks are tagged using an algorithm based on track impact parameters and reconstructed secondary vertices. The numbers of events with exactly one and exactly two b-tagged jets are counted and used to determine simultaneously σtt¯ and the efficiency to reconstruct and b-tag a jet from a top quark decay, thereby minimising the associated systematic uncertainties. The cross-section is measured to be: σtt¯ = 818 ± 8 (stat) ± 27 (syst) ± 19 (lumi) ± 12 (beam) pb, where the four uncertainties arise from data statistics, experimental and theoretical systematic effects, the integrated luminosity and the LHC beam energy, giving a total relative uncertainty of 4.4%. The result is consistent with theoretical QCD calculations at next-to-next-to-leading order. A fiducial measurement corresponding to the experimental acceptance of the leptons is also presented

Charged-particle distributions in √s=13 TeV pp interactions measured with the ATLAS detector at the LHC

Charged-particle distributions are measured in proton–proton collisions at a centre-of-mass energy of 13 TeV, using a data sample of nearly 9 million events, corresponding to an integrated luminosity of 170 μb−1170 μb−1, recorded by the ATLAS detector during a special Large Hadron Collider fill. The charged-particle multiplicity, its dependence on transverse momentum and pseudorapidity and the dependence of the mean transverse momentum on the charged-particle multiplicity are presented. The measurements are performed with charged particles with transverse momentum greater than 500 MeV and absolute pseudorapidity less than 2.5, in events with at least one charged particle satisfying these kinematic requirements. Additional measurements in a reduced phase space with absolute pseudorapidity less than 0.8 are also presented, in order to compare with other experiments. The results are corrected for detector effects, presented as particle-level distributions and are compared to the predictions of various Monte Carlo event generators

Search for TeV-scale gravity signatures in high-mass final states with leptons and jets with the ATLAS detector at sqrt [ s ] = 13TeV

A search for physics beyond the Standard Model, in final states with at least one high transverse momentum charged lepton (electron or muon) and two additional high transverse momentum leptons or jets, is performed using 3.2 fb−1 of proton–proton collision data recorded by the ATLAS detector at the Large Hadron Collider in 2015 at √s = 13 TeV. The upper end of the distribution of the scalar sum of the transverse momenta of leptons and jets is sensitive to the production of high-mass objects. No excess of events beyond Standard Model predictions is observed. Exclusion limits are set for models of microscopic black holes with two to six extra dimensions