CD8 memory T cells have a bioenergetic advantage that underlies their rapid recall ability

A characteristic of memory T (TM) cells is their ability to mount faster and stronger responses to reinfection than naïve T (TN) cells do in response to an initial infection. However, the mechanisms that allow this rapid recall are not completely understood. We found that CD8 TM cells have more mitochondrial mass than CD8 TN cells and, that upon activation, the resulting secondary effector T (TE) cells proliferate more quickly, produce more cytokines, and maintain greater ATP levels than primary effector T cells. We also found that after activation, TM cells increase oxidative phosphorylation and aerobic glycolysis and sustain this increase to a greater extent than TN cells, suggesting that greater mitochondrial mass in TM cells not only promotes oxidative capacity, but also glycolytic capacity. We show that mitochondrial ATP is essential for the rapid induction of glycolysis in response to activation and the initiation of proliferation of both TN and TM cells. We also found that fatty acid oxidation is needed for TM cells to rapidly respond upon restimulation. Finally, we show that dissociation of the glycolysis enzyme hexokinase from mitochondria impairs proliferation and blocks the rapid induction of glycolysis upon T-cell receptor stimulation in TM cells. Our results demonstrate that greater mitochondrial mass endows TM cells with a bioenergetic advantage that underlies their ability to rapidly recall in response to reinfection

Double-plating of ovine critical sized defects of the tibia: a low morbidity model enabling continuous in vivo monitoring of bone healing

<p>Abstract</p> <p>Background</p> <p>Recent studies using sheep critical sized defect models to test tissue engineered products report high morbidity and complications rates. This study evaluates a large bone defect model in the sheep tibia, stabilized with two, a novel Carbon fibre Poly-ether-ether-ketone (CF-PEEK) and a locking compression plate (LCP) which could sustain duration for up to 6 month with an acceptable low complication rate.</p> <p>Methods</p> <p>A large bone defect of 3 cm was performed in the mid diaphysis of the right tibia in 33 sheep. The defect was stabilised with the CF - PEEK plate and an LCP. All sheep were supported with slings for 8 weeks after surgery. The study was carried out for 3 months in 6 and for 6 months in 27 animals.</p> <p>Results</p> <p>The surgical procedure could easily be performed in all sheep and continuous in vivo radiographic evaluation of the defect was possible. This long bone critical sized defect model shows with 6.1% a low rate of complications compared with numbers mentioned in the literature.</p> <p>Conclusions</p> <p>This experimental animal model could serve as a standard model in comparative research. A well defined standard model would reduce the number of experimental animals needed in future studies and would therefore add to ethical considerations.</p

Food effects on statolith composition of the common cuttlefish (Sepia officinalis)

The concentration of trace elements within cephalopod statoliths can provide a record of the environmental characteristics at the time of calcification. To reconstruct accurately the environmental characteristics at the time of calcification, it is important to understand the influence of as many factors as possible. To test the hypothesis that the elemental composition of cuttlefish statoliths could be influenced by diet, juvenile Sepia officinalis were fed either shrimp Crangon sp. or fish Clupea harengus under equal temperature and salinity regimes in laboratory experiments. Element concentrations in different regions of the statoliths (core–lateral dome–rostrum) were determined using laser ablation inductively coupled plasma mass spectrometry (LA- ICPMS). The ratios of Sr/Ca, Ba/Ca, Mn/Ca and Y/Ca in the statolith’s lateral dome of shrimp-fed cuttlefish were significantly higher than in the statolith’s lateral dome of fish-fed cuttlefish. Moreover, significant differences between statolith regions were found for all analysed elements. The fact that diet adds a considerable variation especially to Sr/Ca and Ba/Ca must be taken into account in future micro-chemical statolith studies targeting cephalopod’s life history

Axial forces and bending moments in the loaded rabbit tibia in vivo

<p>Abstract</p> <p>Background</p> <p>Different animal models are used as fracture models in orthopaedic research prior to implant use in humans, although biomechanical forces can differ to a great extend between species due to variable anatomic conditions, particularly with regard to the gait. The rabbit is an often used fracture model, but biomechanical data are very rare. The objective of the present study was to measure axial forces, bending moments, and bending axis directly in the rabbit tibia <it>in vivo</it>. The following hypothesis was tested: Axial forces and bending moments in the mid-diaphysis of rabbit tibia differ from other experimental animals or indirectly calculated data.</p> <p>Methods</p> <p>A minifixateur system with 4 force sensors was developed and attached to rabbit tibia (<it>n </it>= 4), which were subsequently ostectomised. Axial forces, bending moments and bending angles were calculated telemetrically during weight bearing in motion between 6 and 42 days post operation.</p> <p>Results</p> <p>Highest single values were 201% body weight [% bw] for axial forces and 409% bw cm for bending moments. Whereas there was a continous decrease in axial forces over time after day 10 (<it>P </it>= 0.03 on day 15), a decrease in bending moments was inconsistent (<it>P </it>= 0.03 on day 27). High values for bending moments were frequently, but not consistently, associated with high values for axial forces.</p> <p>Conclusion</p> <p>Axial forces in rabbit tibia exceeded axial forces in sheep, and differed from indirectly calculated data. The rabbit is an appropriate fracture model because axial loads and bending moments in rabbit tibia were more closely to human conditions than in sheep tibia as an animal model.</p

An outbreak of SARS-CoV-2 in a public-facing office in England.

BACKGROUND: An outbreak of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) with an attack rate of 55% (22/40 workers) occurred at a public-facing office in England from August to September 2021. Published evidence regarding outbreaks in office workplaces remains limited. AIMS: To describe an investigation of workplace- and worker-related risk factors following an outbreak of SARS-CoV-2 in a public-facing office. METHODS: The COVID-19 (coronavirus disease 2019) Outbreak Investigation to Understand Transmission (COVID-OUT) study undertook an investigation of the outbreak. This included surface sampling, occupational environmental assessment, molecular and serological testing of workers, and detailed questionnaires. RESULTS: Despite existing COVID-19 control measures, surface sampling conducted during a self-imposed 2-week temporary office closure identified viral contamination (10/60 samples, 17% positive), particularly in a small, shared security office (6/9, 67% positive) and on a window handle in one open-plan office. Targeted enhanced cleaning was, therefore, undertaken before the office reopened. Repeat surface sampling after this identified only one positive (2%) sample. Ventilation was deemed adequate using carbon dioxide monitoring (typically ≤1000 ppm). Twelve workers (30%) responded to the COVID-OUT questionnaire, and all had been vaccinated with two doses. One-third of respondents (4/12) reported direct physical or close contact with members of the public; of these, 75% (3/4) reported a divider/screen between themselves and members of the public. CONCLUSIONS: The results highlight the potential utility of surface sampling to identify SARS-CoV-2 control deficiencies and the importance of evolving, site-specific risk assessments with layered COVID-19 mitigation strategies

Sex-related variation in compact bone microstructure of the femoral diaphysis in juvenile rabbits

<p>Abstract</p> <p>Background</p> <p>While gross morphological changes in the skeleton between males and females are well know, differences between sexes in the histomorphology are less known. It is important to have knowledge on the bone structure of rabbits, as this is a widely used species in biomedical research. A study was performed to evaluate the association between sex and the compact bone morphology of the femoral diaphysis in juvenile rabbits.</p> <p>Methods</p> <p>Seventeen clinically healthy 2–3 month-old rabbits (9 females, 8 males) were included in the study. The rabbits were euthanized and the right femur was sampled for analysis. 70–80 microns thick bone sections of the femoral diaphysis were prepared using standard histological equipment. The qualitative histological characteristics were determined according to internationally accepted classification systems while the quantitative parameters were assessed using the software Scion Image. Areas, perimeters, minimum and maximum diameters of primary osteons' vascular canals, Haversian canals and secondary osteons were measured. Additionally, blood plasma concentrations of progesterone, corticosterone, IGF-I, testosterone and estradiol were analyzed.</p> <p>Results</p> <p>Qualitative histological characteristics were similar for both sexes. However, variations of certain quantitative histological characteristics were identified. Measured parameters of the primary osteons' vascular canals were higher in males than for females. On the other hand, females had significant higher values of secondary osteons parameters. Differences in Haversian canals parameters were only significant for minimum diameter.</p> <p>Conclusion</p> <p>The study demonstrated that quantitative histological characteristics of compact bone tissue of the femoral diaphysis in juvenile rabbits were sex dependent. The variations may be associated with different growth and modeling of the femur through influence by sex-specific steroids, mechanical loads, genetic factors and a multitude of other sources. The results can be applied in experimental studies focusing on comparison of the skeletal biology of the sexes.</p

Physics, Astrophysics and Cosmology with Gravitational Waves

Gravitational wave detectors are already operating at interesting sensitivity levels, and they have an upgrade path that should result in secure detections by 2014. We review the physics of gravitational waves, how they interact with detectors (bars and interferometers), and how these detectors operate. We study the most likely sources of gravitational waves and review the data analysis methods that are used to extract their signals from detector noise. Then we consider the consequences of gravitational wave detections and observations for physics, astrophysics, and cosmology.Comment: 137 pages, 16 figures, Published version <http://www.livingreviews.org/lrr-2009-2

Factors associated with self-reported number of teeth in a large national cohort of Thai adults

<p>Abstract</p> <p>Background</p> <p>Oral health in later life results from individual's lifelong accumulation of experiences at the personal, community and societal levels. There is little information relating the oral health outcomes to risk factors in Asian middle-income settings such as Thailand today.</p> <p>Methods</p> <p>Data derived from a cohort of 87,134 adults enrolled in Sukhothai Thammathirat Open University who completed self-administered questionnaires in 2005. Cohort members are aged between 15 and 87 years and resided throughout Thailand. This is a large study of self-reported number of teeth among Thai adults. Bivariate and multivariate logistic regressions were used to analyse factors associated with self-reported number of teeth.</p> <p>Results</p> <p>After adjusting for covariates, being female (OR = 1.28), older age (OR = 10.6), having low income (OR = 1.45), having lower education (OR = 1.33), and being a lifetime urban resident (OR = 1.37) were statistically associated (p < 0.0001) with having less than 20 teeth. In addition, daily soft drink consumptions (OR = 1.41), current regular smoking (OR = 1.39), a history of not being breastfed as a child (OR = 1.34), and mother's lack of education (OR = 1.20) contributed significantly to self-reported number of teeth in fully adjusted analyses.</p> <p>Conclusions</p> <p>This study addresses the gap in knowledge on factors associated with self-reported number of teeth. The promotion of healthy childhoods and adult lifestyles are important public health interventions to increase tooth retention in middle and older age.</p

Observation of associated near-side and away-side long-range correlations in √sNN=5.02 TeV proton-lead collisions with the ATLAS detector

Two-particle correlations in relative azimuthal angle (Δϕ) and pseudorapidity (Δη) are measured in √sNN=5.02  TeV p+Pb collisions using the ATLAS detector at the LHC. The measurements are performed using approximately 1  μb-1 of data as a function of transverse momentum (pT) and the transverse energy (ΣETPb) summed over 3.1<η<4.9 in the direction of the Pb beam. The correlation function, constructed from charged particles, exhibits a long-range (2<|Δη|<5) “near-side” (Δϕ∼0) correlation that grows rapidly with increasing ΣETPb. A long-range “away-side” (Δϕ∼π) correlation, obtained by subtracting the expected contributions from recoiling dijets and other sources estimated using events with small ΣETPb, is found to match the near-side correlation in magnitude, shape (in Δη and Δϕ) and ΣETPb dependence. The resultant Δϕ correlation is approximately symmetric about π/2, and is consistent with a dominant cos⁡2Δϕ modulation for all ΣETPb ranges and particle pT

Measurement of the cross-section of high transverse momentum vector bosons reconstructed as single jets and studies of jet substructure in pp collisions at √s = 7 TeV with the ATLAS detector

This paper presents a measurement of the cross-section for high transverse momentum W and Z bosons produced in pp collisions and decaying to all-hadronic final states. The data used in the analysis were recorded by the ATLAS detector at the CERN Large Hadron Collider at a centre-of-mass energy of √s = 7 TeV;{\rm Te}{\rm V}$and correspond to an integrated luminosity of$4.6\;{\rm f}{{{\rm b}}^{-1}}$. The measurement is performed by reconstructing the boosted W or Z bosons in single jets. The reconstructed jet mass is used to identify the W and Z bosons, and a jet substructure method based on energy cluster information in the jet centre-of-mass frame is used to suppress the large multi-jet background. The cross-section for events with a hadronically decaying W or Z boson, with transverse momentum${{p}_{{\rm T}}}\gt 320\;{\rm Ge}{\rm V}$and pseudorapidity$|\eta |\lt 1.9$, is measured to be${{\sigma }_{W+Z}}=8.5\pm 1.7$ pb and is compared to next-to-leading-order calculations. The selected events are further used to study jet grooming techniques