Photoluminescence enhancement of ZnO via coupling with surface plasmons on Al thin films

We present that the ultra-violet emission of ZnO can be enhanced, as much as six-times its integral intensity, using an Al thin interlayer film between the Si substrate and ZnO thin film and a postfabrication laser annealing process. The laser annealing is a cold process that preserves the chemical state and integrity of the underlying aluminum layer, while it is essential for the improvement of the ZnO performance as a light emitter and leads to enhanced emission in the visible and in the ultraviolet spectral ranges. In all cases, the metal interlayer enhances the intensity of the emitted light, either through coupling of the surface plasmon that is excited at the Al/ZnO interface, in the case of light-emitting ZnO in the ultraviolet region, or by the increased back reflection from the Al layer, in the case of the visible emission. In order to evaluate the process and develop a solid understanding of the relevant physical phenomena, we investigated the effects of various metals as interlayers (Al, Ag, and Au), the metal interlayer thickness, and the incorporation of a dielectric spacer layer between Al and ZnO. Based on these experiments, Al emerged as the undisputable best choice of metal interlayers because of its compatibility with the laser annealing process, as well as due to its high optical reflectivity at 380 and 248 nm, which leads to the effective coupling with surface plasmons at the Al/ZnO interfaces at 380 nm and the secondary annealing of ZnO by the back-reflected 248 nm laser beam

Laser-driven structural modifications and diffusion phenomena of plasmonic AlN/Ag stratified films

Laser annealing (LA) of AlN/Ag multilayers was proven to be an effective process to control the structure and dispersion of Ag into the AlN resulting in intense coloration via the localized surface plasmon resonance, which is of particular importance for decorative applications. In this work we present a study of the structural changes occurring in various AlN/Ag multilayers after LA, in an effort to establish firm knowledge of the diffusion and re-nucleation mechanisms that occur during the laser process. We investigate the effect of the basic LA parameters, such as the laser wavelength (193 and 248 nm), fluence (400–700 mJ/cm2), pressure (1 and 10 Bar) and number of pulses (1 and 2) and we show that the main processes is the Ag particle enhancement close to the film surface as a result of additive outidiffusion Ag and the formation of nanoparticles of varying size

Sub-surface laser nanostructuring in stratified metal/dielectric media: a versatile platform towards flexible, durable and large-scale plasmonic writing

Laser nanostructuring of pure ultrathin metal layers or ceramic/metal composite thin films has emerged as a promising route for the fabrication of plasmonic patterns with applications in information storage, cryptography, and security tagging. However, the environmental sensitivity of pure Ag layers and the complexity of ceramic/metal composite film growth hinder the implementation of this technology to large-scale production, as well as its combination with flexible substrates. In the present work we investigate an alternative pathway, namely, starting from non-plasmonic multilayer metal/dielectric layers, whose growth is compatible with large scale production such as in-line sputtering and roll-to-roll deposition, which are then transformed into plasmonic templates by single-shot UV-laser annealing (LA). This entirely cold, large-scale process leads to a subsurface nanoconstruction involving plasmonic Ag nanoparticles (NPs) embedded in a hard and inert dielectric matrix on top of both rigid and flexible substrates. The subsurface encapsulation of Ag NPs provides durability and long-term stability, while the cold character of LA suits the use of sensitive flexible substrates. The morphology of the final composite film depends primarily on the nanocrystalline character of the dielectric host and its thermal conductivity. We demonstrate the emergence of a localized surface plasmon resonance, and its tunability depending on the applied fluence and environmental pressure. The results are well explained by theoretical photothermal modeling. Overall, our findings qualify the proposed process as an excellent candidate for versatile, large-scale optical encoding applications. Keywords : Ceramic materials; Composite films; Environmental technology; Film growth; Film preparation; Multilayer films; Multilayers; Nanocrystals; Optical data processing; Plasmons; Silver; Substrates; Surface plasmon resonance; Thin films; Ultrathin films, Laser annealing; Localised surface plasmon resonance; Multi-layer thin film; Nano-structuring; Plasmonics, Nanocomposite film

Shear-strain step response in linear regime of dilute suspensions of naturally bent carbon nanotubes

Impressive enhancements of the storage modulus have been documented when low volume fractions of single wall carbon nanotubes (SWNTs) are added to a Newtonian solvent for obtaining dilute suspensions. The intrinsic bending dynamics of carbon nanotubes (CNTs) has been proposed to explain such elasticity. CNTs contain topological defects inducing naturally bent structures in absence of external forces and, hence, a semiflexible filament with a bent configuration at minimal internal-bending-energy is used for mimicking the structure of SWNTs in suspension. Previous continuous model is discretized as a non-freely jointed bead-rod chain with a naturally bent configuration for simulating the rheological behaviour after a shear-strain step in linear regime of SWNT dilute suspension by using a Brownian dynamics (BD) approach. In general, bead-rod chains exhibit an instantaneous relaxation after a high shear-strain step. Bending rigidity and number of constitutive rods are found to be determinant parameters in the internal-energy relaxation behaviour of non-freely jointed bead-rod chains in dilute solution. Proper comparisons between the BD simulation results and the experimental data for treated SWNT dilute suspensions confirm the consistency of the physical model mimicking the structure of a SWNT

Laser-matter interactions, phase changes and diffusion phenomena during laser annealing of plasmonic AlN:Ag templates and their applications in optical encoding

Nanocomposite thin films incorporating silver nanoparticles are emerging as photosensitive templates for optical encoding applications. However, a deep understanding of the fundamental physicochemical mechanisms occurring during laser-matter interactions is still lacking. In this work, the photosensitivity of AlN:Ag plasmonic nanocomposites is thoroughly examined and a series of UV laser annealing parameters, such as wavelength, fluence and the number of pulses are investigated. We report and study effects such as the selective crystallization of the AlN matrix, the enlargement of the Ag nanoparticle inclusions by diffusion of laser-heated Ag and the outdiffusion of Ag to the film's surface. Detailed optical calculations contribute to the identification and understanding of the aforementioned physical mechanisms and of their dependency on the laser processing parameters. We are then able to predetermine the plasmonic response of processed AlN:Ag nanocomposites and demonstrate its potential by means of optically encoding an overt or covert cryptographic pattern

Thermal Conductivity of Carbon Nanotubes and their Polymer Nanocomposites: A Review

Thermally conductive polymer composites offer new possibilities for replacing metal parts in several applications, including power electronics, electric motors and generators, heat exchangers, etc., thanks to the polymer advantages such as light weight, corrosion resistance and ease of processing. Current interest to improve the thermal conductivity of polymers is focused on the selective addition of nanofillers with high thermal conductivity. Unusually high thermal conductivity makes carbon nanotube (CNT) the best promising candidate material for thermally conductive composites. However, the thermal conductivities of polymer/CNT nanocomposites are relatively low compared with expectations from the intrinsic thermal conductivity of CNTs. The challenge primarily comes from the large interfacial thermal resistance between the CNT and the surrounding polymer matrix, which hinders the transfer of phonon dominating heat conduction in polymer and CNT. This article reviews the status of worldwide research in the thermal conductivity of CNTs and their polymer nanocomposites. The dependence of thermal conductivity of nanotubes on the atomic structure, the tube size, the morphology, the defect and the purification is reviewed. The roles of particle/polymer and particle/particle interfaces on the thermal conductivity of polymer/CNT nanocomposites are discussed in detail, as well as the relationship between the thermal conductivity and the micro- and nano-structure of the composite

Chemical composition of nanoporous layer formed by electrochemical etching of p-type GaAs

Abstract : We have performed a detailed characterization study of electrochemically etched p-type GaAs in a hydrofluoric acid-based electrolyte. The samples were investigated and characterized through cathodoluminescence (CL), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), and X-ray photoelectron spectroscopy (XPS). It was found that after electrochemical etching, the porous layer showed a major decrease in the CL intensity and a change in chemical composition and in the crystalline phase. Contrary to previous reports on p-GaAs porosification, which stated that the formed layer is composed of porous GaAs, we report evidence that the porous layer is in fact mainly constituted of porous As2O3. Finally, a qualitative model is proposed to explain the porous As2O3 layer formation on p-GaAs substrate