Potential effects of oilseed rape expressing oryzacystatin-1 (OC-1) and of purified insecticidal proteins on larvae of the solitary bee Osmia bicornis

Despite their importance as pollinators in crops and wild plants, solitary bees have not previously been included in non-target testing of insect-resistant transgenic crop plants. Larvae of many solitary bees feed almost exclusively on pollen and thus could be highly exposed to transgene products expressed in the pollen. The potential effects of pollen from oilseed rape expressing the cysteine protease inhibitor oryzacystatin-1 (OC-1) were investigated on larvae of the solitary bee Osmia bicornis (= O. rufa). Furthermore, recombinant OC-1 (rOC-1), the Bt toxin Cry1Ab and the snowdrop lectin Galanthus nivalis agglutinin (GNA) were evaluated for effects on the life history parameters of this important pollinator. Pollen provisions from transgenic OC-1 oilseed rape did not affect overall development. Similarly, high doses of rOC-1 and Cry1Ab as well as a low dose of GNA failed to cause any significant effects. However, a high dose of GNA (0.1%) in the larval diet resulted in significantly increased development time and reduced efficiency in conversion of pollen food into larval body weight. Our results suggest that OC-1 and Cry1Ab expressing transgenic crops would pose a negligible risk for O. bicornis larvae, whereas GNA expressing plants could cause detrimental effects, but only if bees were exposed to high levels of the protein. The described bioassay with bee brood is not only suitable for early tier non-target tests of transgenic plants, but also has broader applicability to other crop protection products

Search for new phenomena in final states with an energetic jet and large missing transverse momentum in pp collisions at √ s = 8 TeV with the ATLAS detector

Results of a search for new phenomena in final states with an energetic jet and large missing transverse momentum are reported. The search uses 20.3 fb−1 of √ s = 8 TeV data collected in 2012 with the ATLAS detector at the LHC. Events are required to have at least one jet with pT > 120 GeV and no leptons. Nine signal regions are considered with increasing missing transverse momentum requirements between Emiss T > 150 GeV and Emiss T > 700 GeV. Good agreement is observed between the number of events in data and Standard Model expectations. The results are translated into exclusion limits on models with either large extra spatial dimensions, pair production of weakly interacting dark matter candidates, or production of very light gravitinos in a gauge-mediated supersymmetric model. In addition, limits on the production of an invisibly decaying Higgs-like boson leading to similar topologies in the final state are presente

On the detailed morphological and chemical evolution of phases during laser powder bed fusion and common post-processing heat treatments of IN718

IN718 is the most common Ni-based superalloy for manufacturing aircraft engine parts via thermo-mechanical treatments. The evolution of nanoscale strengthening phases is well researched, enabling optimization of strength, fatigue, and creep properties. Recently, IN718 has shown great viability for laser powder bed fusion (LPBF) additive manufacturing of aerospace parts. However, the detailed microstructure-property relationships during thermal profiles typical to LPBF are not yet well understood. Previous works reported interdendritic precipitation of Laves phase. These detrimental particles can be dissolved by heat treatments, however, the detailed nanoscale phase evolution remains unknown. Using atom probe microscopy, we report on the detailed morphological and chemical evolution of phases in IN718 after LPBF with chessboard versus meander scanning strategies, and direct ageing versus homogenization and ageing treatments. Due to differences in scanning vector length, up to 3.6 times larger dendritic structures, double volume fractions of Laves particles, and Al clusters are found in the chessboard strategy. Coarser matrix grains and a higher dislocation density are detected in the meander strategy. The precise chemical composition and morphology evolution of the matrix, Laves, MC, γ′, and γ′′ phases are obtained and correlated to hardness. Retained Laves phase after direct ageing causes precipitation of 4% volume fraction of γ′′, with additional coarsened precipitates formed along dislocations. Direct ageing leads to an increase in hardness corresponding to roughly 190 HV. Due to Laves phase dissolution, a volume fraction of 16% of compositionally stable, larger γ′′ precipitates is found after homogenization and ageing, also causing partial matrix recrystallization

Effects of standard heat treatment on micro-to nanostructure heterogeneities in a Rene 65 Ni-based superalloy billet

Advancements in the manufacturing of aeroengine components with superior mechanical properties rely on the microstructure homogeneity of industrially forged Ni-based superalloys. Billets often contain microstructural heterogeneities that can persist throughout the process, potentially compromising the integrity of the final product. Rene 65 is a relatively new superalloy with high-temperature mechanical properties superior to those of Alloy 718. However, systematic studies on its microstructure-property relationships are scarce. Here, we correlate the microstructural evolution with the hardness of a Rene 65 billet subjected to industrial processing and standard heat treatments. Multiscale microstructural heterogeneities, including grain size, geometrically necessary dislocations, twin boundary density, and the multimodal distribution of γʹ precipitates, are characterised. Grain growth occurs near the billet centre. Precipitation varies with radial position, showing up to a two-fold change in primary and secondary γʹ fractions. Tertiary γʹ precipitates exhibit variations in morphology and chemical composition, with Cr and Co enrichment near the billet surface. These heterogeneities arise from varying strain distributions and cooling rates during radial forging. Sub-solvus annealing and ageing are shown to mitigate these heterogeneities by promoting recrystallisation, recovery, and homogeneous precipitation of tertiary γʹ. A strengthening model elucidates the active mechanisms in as-received and heat-tread conditions, predicting hardness with a deviation of <8 %. Analyses of grain boundaries and γ/γʹ interfaces reveal strong segregation of Mo, W, Nb, C and B before and after heat treatment, with Mo and B showing the highest interfacial excess values. Insights into the microstructural evolution and its impact on properties could guide the development of next-generation aerospace parts

Performance of missing transverse momentum reconstruction with the ATLAS detector using proton–proton collisions at √s = 13 TeV

The performance of the missing transverse momentum (EmissT) reconstruction with the ATLAS detector is evaluated using data collected in proton–proton collisions at the LHC at a centre-of-mass energy of 13 TeV in 2015. To reconstruct EmissT, fully calibrated electrons, muons, photons, hadronically decaying τ -leptons, and jets reconstructed from calorimeter energy deposits and charged-particle tracks are used. These are combined with the soft hadronic activity measured by reconstructed charged-particle tracks not associated with the hard objects. Possible double counting of contributions from reconstructed charged-particle tracks from the inner detector, energy deposits in the calorimeter, and reconstructed muons from the muon spectrometer is avoided by applying a signal ambiguity resolution procedure which rejects already used signals when combining the various EmissT contributions. The individual terms as well as the overall reconstructed EmissT are evaluated with various performance metrics for scale (linearity), resolution, and sensitivity to the data-taking conditions. The method developed to determine the systematic uncertainties of the EmissT scale and resolution is discussed. Results are shown based on the full 2015 data sample corresponding to an integrated luminosity of 3.2 fb−1

Search for High-Mass Resonances Decaying to τν in pp Collisions at √s=13 TeV with the ATLAS Detector

A search for high-mass resonances decaying to τν using proton-proton collisions at √s=13 TeV produced by the Large Hadron Collider is presented. Only τ-lepton decays with hadrons in the final state are considered. The data were recorded with the ATLAS detector and correspond to an integrated luminosity of 36.1 fb−1. No statistically significant excess above the standard model expectation is observed; model-independent upper limits are set on the visible τν production cross section. Heavy W′ bosons with masses less than 3.7 TeV in the sequential standard model and masses less than 2.2–3.8 TeV depending on the coupling in the nonuniversal G(221) model are excluded at the 95% credibility level

Operation and performance of the ATLAS Tile Calorimeter in Run 1

The Tile Calorimeter is the hadron calorimeter covering the central region of the ATLAS experiment at the Large Hadron Collider. Approximately 10,000 photomultipliers collect light from scintillating tiles acting as the active material sandwiched between slabs of steel absorber. This paper gives an overview of the calorimeter’s performance during the years 2008–2012 using cosmic-ray muon events and proton–proton collision data at centre-of-mass energies of 7 and 8TeV with a total integrated luminosity of nearly 30 fb−1. The signal reconstruction methods, calibration systems as well as the detector operation status are presented. The energy and time calibration methods performed excellently, resulting in good stability of the calorimeter response under varying conditions during the LHC Run 1. Finally, the Tile Calorimeter response to isolated muons and hadrons as well as to jets from proton–proton collisions is presented. The results demonstrate excellent performance in accord with specifications mentioned in the Technical Design Report

Measurement of the t¯tZ and t¯tW cross sections in proton-proton collisions at √s=13 TeV with the ATLAS detector

A measurement of the associated production of a top-quark pair (t¯t) with a vector boson (W, Z) in proton-proton collisions at a center-of-mass energy of 13 TeV is presented, using 36.1  fb−1 of integrated luminosity collected by the ATLAS detector at the Large Hadron Collider. Events are selected in channels with two same- or opposite-sign leptons (electrons or muons), three leptons or four leptons, and each channel is further divided into multiple regions to maximize the sensitivity of the measurement. The t¯tZ and t¯tW production cross sections are simultaneously measured using a combined fit to all regions. The best-fit values of the production cross sections are σt¯tZ=0.95±0.08stat±0.10syst pb and σt¯tW=0.87±0.13stat±0.14syst pb in agreement with the Standard Model predictions. The measurement of the t¯tZ cross section is used to set constraints on effective field theory operators which modify the t¯tZ vertex

The antimicrobial resistance patterns and associated determinants in Streptococcus suis isolated from humans in southern Vietnam, 1997-2008

<p>Abstract</p> <p>Background</p> <p><it>Streptococcus suis </it>is an emerging zoonotic pathogen and is the leading cause of bacterial meningitis in adults in Vietnam. Systematic data on the antimicrobial susceptibility profiles of <it>S. suis </it>strains isolated from human cases are lacking. We studied antimicrobial resistance and associated resistance determinants in <it>S. suis </it>isolated from patients with meningitis in southern Vietnam.</p> <p>Methods</p> <p><it>S. suis </it>strains isolated between 1997 and 2008 were investigated for their susceptibility to six antimicrobial agents. Strains were screened for the presence and expression of tetracycline and erythromycin resistance determinants and the association of <it>tet</it>(M) genes with <it>Tn</it>916- like transposons. The localization of tetracycline resistance gene <it>tet</it>(L) was determined by pulse field gel electrophoresis and Southern blotting.</p> <p>Results</p> <p>We observed a significant increase in resistance to tetracycline and chloramphenicol, which was concurrent with an increase in multi-drug resistance. In tetracycline resistance strains, we identified <it>tet</it>(M), <it>tet</it>(O), <it>tet</it>(W) and <it>tet</it>(L) and confirmed their expression. All <it>tet</it>(M) genes were associated with a <it>Tn</it>916-like transposon. The co-expression of <it>tet</it>(L) and other tetracycline resistance gene(s) encoding for ribosomal protection protein(s) was only detected in strains with a minimum inhibitory concentration (MIC) of tetracycline of ≥ 64 mg/L</p> <p>Conclusions</p> <p>We demonstrated that multi-drug resistance in <it>S. suis </it>causing disease in humans in southern Vietnam has increased over the 11-year period studied. We report the presence and expression of <it>tet</it>(L) in <it>S. suis </it>strains and our data suggest that co-expression of multiple genes encoding distinct mechanism is required for an MIC ≥ 64 mg/L to tetracycline.</p

Combined measurement of differential and total cross sections in the H → γγ and the H → ZZ* → 4ℓ decay channels at s=13 TeV with the ATLAS detector

A combined measurement of differential and inclusive total cross sections of Higgs boson production is performed using 36.1 fb−1 of 13 TeV proton–proton collision data produced by the LHC and recorded by the ATLAS detector in 2015 and 2016. Cross sections are obtained from measured H→γγ and H→ZZ*(→4ℓ event yields, which are combined taking into account detector efficiencies, resolution, acceptances and branching fractions. The total Higgs boson production cross section is measured to be 57.0−5.9 +6.0 (stat.) −3.3 +4.0 (syst.) pb, in agreement with the Standard Model prediction. Differential cross-section measurements are presented for the Higgs boson transverse momentum distribution, Higgs boson rapidity, number of jets produced together with the Higgs boson, and the transverse momentum of the leading jet. The results from the two decay channels are found to be compatible, and their combination agrees with the Standard Model predictions